|Table of Contents|

Nonlinear Finite Element Analysis of Steel Truss Reinforced Concrete Shear Walls(PDF)

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

Issue:
2008年02期
Page:
7-14
Research Field:
Publishing date:
2008-06-20

Info

Title:
Nonlinear Finite Element Analysis of Steel Truss Reinforced Concrete Shear Walls
Author(s):
LI Guo-qiang1;  LI Yi-song1; 2;  CUI Da-guang1; 2
1. School of Civil Engineering, Tongji University, Shanghai 200092, China; 2. Architectural Design and Research Institute, Tongji University, Shanghai 200092, China
Keywords:
steel truss reinforced concrete;  shear wall;  nonlinear finite element analysis;  stress;  strain
PACS:
TU973.16
DOI:
-
Abstract:
Using the finite element analysis software ANSYS, authors analyzed the reinforced concrete mid-rise and low-rise shear wall embedded with shape steel, and got the wall deformation, as well as the mechanics indexes, such as deformation properties, cracks' appearance, development and distribution shapes, the specimen's damaging patterns, the horizontal load and deformation skeleton curves, the specimen's cracking load, ultimate load and initial stiffness and yielding stiffness and so on. The results show that an effective method to perform the mechanical property analysis on this kind of structural components which are in good agreement with the test results is provided.

References:

[1] YUNUS S M,PAWLAK T P,COOK R D.Solid El-ements with Rotational Degrees of Freedom[J].International Journal for Numerical Methods in Engineering,1991,31:573-592.
[2]DVORKIN E N.On Nonlinear Finite Element Analysis of Shell Structures[D].Cambridge:Massachusetts Institute of Technology,1984.
[3]DVORKIN E N,BATHE K J.A Continuum Mechanics Based Four-node Shell Element for General Nonlinear Analysis[J].Engineering Computations,1984,1(1):77-88.
[4]BATHE K J,DVORKIN E N.A Formulation of General Shell Elements-the Use of Mixed Interpolation of Tensorial Components[J].International Journal for Numerical Methods in Engineering,1986,22:697-722.
[5]AHMAD S,IRONS B M,ZIENKIEWICZ O C.Analy-sis of Thick and Thin Shell Structures by Curved Fi-nite Elements[J].International Journal for Numerical Methods in Engineering,1970,2(3):419-451.
[6]COOK R D.Concepts and Applications of Finite El-ement Analysis[M].2nd ed.New York:John Wiley & Sons,1981.
[7]GB 50010-2002,混凝土结构设计规范[S]. GB 50010-2002,Code for Design of Concrete Structure[S].
[8]吴晓春,杨祖权,万盛武,等.ANSYS软件在构件有限元分析中的应用[J].四川建筑,2005,25(4):51-52. WU Xiao-chun,YANG Zu-quan,WAN Sheng-wu,et al.Application of the Software ANSYS in the Finite Element[J].Sichuan Architecture,2005,25(4):51-52.
[9]YB 9082-97,钢骨混凝土结构设计规程[S]. YB 9082-97,Technical Specification for Steel Reinforced Concrete Structure[S].
[10]JGJ 138-2001,型钢混凝土组合结构技术规程[S]. JGJ 138-2001,Technical Specification for Steel Reinforced Concrete Component Structure[S].
[11]方鄂华,叶列平.《钢骨混凝土结构设计规程》讲座第四讲--钢骨混凝土剪力墙设计[J].建筑结构,1999,29(12):57-59. FANG E-hua,YE Lie-ping.Lecture of Specification for Design of Steel-reinforced Concrete Structure(YB 9082-97):Chapter 4 Design of SRC Shear Wall[J].Building Structure,1999,29(12):57-59.
[12]刘维亚.型钢混凝土组合结构构造与计算手册[M].北京:中国建筑工业出版社,2004. LIU Wei-ya.Structural Construction and Calculation Manual of the Steel-reinforced Concrete Component Structure[M].Beijing:China Architecture & Building Press,2004.
[13]黄雄军,赵世春.带劲性钢筋混凝土边框低剪力墙的试验研究[J].西南交通大学学报,1999,34(5):535-539. HUANG Xiong-jun,ZHAO Shi-chun.Test Study on Steel Reinforced Concrete Low Shear Walls[J].Journal of Southwest Jiaotong University,1999,34(5):535-539.
[14]曹万林,张建伟,田宝发,等.带暗支撑低矮剪力墙抗震性能试验及承载力计算[J].土木工程学报,2004,37(3):44-51. CAO Wan-lin,ZHANG Jian-wei,TIAN Bao-fa,et al.Experimental Study on Aseismatic Property and Calculation of Load-carrying Capacity for Low-rise RC Shear Walls with Concealed Bracings[J].China Civil Engineering Journal,2004,37(3):44-51.

Memo

Memo:
-
Last Update: 2008-06-20