|Table of Contents|

Research progress on joint connection of precast concrete shear wall structures(PDF)

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

Issue:
2024年01期
Page:
15-30
Research Field:
综述
Publishing date:

Info

Title:
Research progress on joint connection of precast concrete shear wall structures
Author(s):
WANG Bin1; 2;  ZHANG Jingxuan1;  SHI Qingxuan1; 2;  YANG Zhou1;  CAI Wenzhe3;  ZHANG Ye1
(1. School of Civil Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, Shaanxi, China; 2. Key Lab of Structural Engineering and Earthquake Resistance, Ministry of Education, Xi'an University of Architecture and Technology, Xi'an 710055, Shaanxi, China; 3. School of Urban Planning and Municipal Engineering, Xi'an Polytechnic University, Xi'an 710055, Shaanxi, China)
Keywords:
prefabricated shear wall;  horizontal joint;  vertical joint;  connection form;  seismic performance
PACS:
TU375
DOI:
10.19815/j.jace.2023.05039
Abstract:
There are many horizontal and vertical joints when assembling prefabricated shear wall structures. In view of the large stiffness of the shear wall, the connection at joints is prone to be damage accumulation caused by insufficient stiffness, which has become a decisive factor affecting the integrity and seismic performance of the structure. The connection forms of horizontal and vertical joints of prefabricated shear wall structures under development in China and other countries were summarized, and the structural characteristics, seismic performance, application advantages and technical bottlenecks of various connection forms were systematically expounded and analyzed. On this basis, the development direction of connection technology of prefabricated shear wall structures was discussed. The results show that at present, the wet connection technology has been relatively mature and widely used, but there are still some problems such as large amount of wet operation on site and difficulties in detecting and controlling the quality. The dry connection technology has a high degree of industrialization, but it also has high requirements for construction accuracy. Moreover, the possible bolt loosening, rust, and wear issues limit its engineering application. Integrating energy dissipation technology into vertical joints connections, utilizing ultra-high performance concrete to achieve horizontal joint connections, and combining with recoverable function seismic protection technology, is a new growth point for the hig-quality development of prefabricated shear wall structures in the future.

References:

[1] 绿色工业建筑评价标准:GB/T 50878—2013[S].北京:中国建筑工业出版社,2014.
Evaluation standard for green industrial building:GB/T 50878—2013[S].Beijing:China Architecture & Building Press,2014.
[2]薛伟辰,胡 翔.预制混凝土剪力墙结构体系研究进展[J].建筑结构学报,2019,40(2):44-55.
XUE Weichen,HU Xiang.State of the art of studies on precast concrete shear wall structures[J].Journal of Building Structures,2019,40(2):44-55.
[3]陈建伟,苏幼坡.预制装配式剪力墙结构及其连接技术[J].世界地震工程,2013,29(1):38-48.
CHEN Jianwei,SU Youpo.Prefabricated concrete shear wall structure and its connecting technology[J].World Earthquake Engineering,2013,29(1):38-48.
[4]刘良林,肖建庄.钢筋套筒灌浆连接研究进展[J].建筑结构学报,2023,44(1):235-247.
LIU Lianglin,XIAO Jianzhuang.An overview of studies on grouted sleeve connections[J].Journal of Building Structures,2023,44(1):235-247.
[5]钱稼茹,杨新科,秦 珩,等.竖向钢筋采用不同连接方法的预制钢筋混凝土剪力墙抗震性能试验[J].建筑结构学报,2011,32(6):51-59.
QIAN Jiaru,YANG Xinke,QIN Heng,et al.Tests on seismic behavior of pre-cast shear walls with various methods of vertical reinforcement splicing[J].Journal of Building Structures,2011,32(6):51-59.
[6]PENG Y Y,QIAN J R,WANG Y H.Cyclic performance of precast concrete shear walls with a mortar-sleeve connection for longitudinal steel bars[J].Materials and Structures,2016,49(6):2455-2469.
[7]WU M,LIU X A,LIU H T,et al.Seismic performance of precast short-leg shear wall using a grouting sleeve connection[J].Engineering Structures,2020,208:110338.
[8]余 琼,孙佳秋,许雪静,等.钢筋套筒灌浆搭接连接的预制剪力墙抗震试验[J].同济大学学报(自然科学版),2018,46(10):1348-1359,1373.
YU Qiong,SUN Jiaqiu,XU Xuejing,et al.Experimental study on seismic behavior of precast shear walls with reinforcement spliced by grouted sleeve lapping connector[J].Journal of Tongji University(Natural Science),2018,46(10):1348-1359,1373.
[9]何思聪.装配式混凝土结构钢筋套筒灌浆连接性能与质量检验[D].宁波:宁波大学,2021.
HE Sicong.Connection performance and quality inspection of reinforced sleeve grouting in fabricated concrete structure[D].Ningbo:Ningbo University,2021.
[10]肖 顺,李向民,许清风,等.套筒灌浆缺陷整治预制混凝土剪力墙抗震性能试验研究[J].建筑结构学报,2022,43(4):167-176.
XIAO Shun,LI Xiangmin,XU Qingfeng,et al.Experimental study on seismic performance of precast concrete shear walls with treatment of sleeve grouting defects[J].Journal of Building Structures,2022,43(4):167-176.
[11]PARK R,PAULY T.Reinforced concrete structures[M].New York:John Wiley and Sons Inc,1982.
[12]赵唯坚,郭婉楠,金 峤,等.预制装配式剪力墙结构竖向连接形式的发展现状[J].工业建筑,2014,44(4):115-121,59.
ZHAO Weijian,GUO Wannan,JIN Qiao,et al.State of the art research on connection type of vertical components for precast concrete shear wall systems[J].Industrial Construction,2014,44(4):115-121,59.
[13]LUTE L A.Analysis of stresses in concrete near a reinforcing bar due to bond and transverse cracking[J].ACI Journal Proceedings,1970,67(10):778-787.
[14]姜洪斌,张海顺,刘文清,等.预制混凝土插入式预留孔灌浆钢筋搭接试验[J].哈尔滨工业大学学报,2011,43(10):18-23.
JIANG Hongbin,ZHANG Haishun,LIU Wenqing,et al.Experimental study on plug-in filling hole for steel bar lapping of precast concrete structure[J].Journal of Harbin Institute of Technology,2011,43(10):18-23.
[15]YERLICI V A,TURAN O.Factors affecting anchorage bond strength in high-performance concrete[J].ACI Structural Journal,2000,97(3):499-507.
[16]ENRICO S,SUCHART L.Responses of reinforced concrete members including bond-slip effects[J].ACI Structural Journal,2000,97(6):831-839.
[17]赵 培.约束浆锚钢筋搭接连接试验研究[D].哈尔滨:哈尔滨工业大学,2011.
ZHAO Pei.Experimental research on restraint grouting-anchoring overlap-joint of steel bar[D].Harbin:Harbin Institute of Technology,2011.
[18]陈云钢,刘家彬,郭正兴,等.装配式剪力墙水平拼缝钢筋浆锚搭接抗震性能试验[J].哈尔滨工业大学学报,2013,45(6):83-89.
CHEN Yungang,LIU Jiabin,GUO Zhengxing,et al.Test on seismic performance of precast shear wall with reinforcements grouted in holes and spliced indirectly in horizontal connections[J].Journal of Harbin Institute of Technology,2013,45(6):83-89.
[19]张壮南,李姗珊,柳旭东,等.装配式剪力墙浆锚连接的受力性能试验研究[J].建筑结构学报,2019,40(2):189-197.
ZHANG Zhuangnan,LI Shanshan,LIU Xudong,et al.Experimental investigation of mechanical behavior of steel grouted connection for prefabricated shear wall[J].Journal of Building Structures,2019,40(2):189-197.
[20]郑志远,潘 寒,胡中平,等.预制钢筋混凝土剪力墙连接体系研究综述[J].建筑结构,2021,51(增2):1172-1180.
ZHENG Zhiyuan,PAN Han,HU Zhongping,et al.Research on connection system of prefabricated reinforced concrete shear wall[J].Building Structure,2021,51(S2):1172-1180.
[21]刘家彬,陈云钢,郭正兴,等.装配式混凝土剪力墙水平拼缝U型闭合筋连接抗震性能试验研究[J].东南大学学报(自然科学版),2013,43(3):565-570.
LIU Jiabin,CHEN Yungang,GUO Zhengxing,et al.Test on seismic performance of precast concrete shear wall with U-shaped closed reinforcements connected in horizontal joints[J].Journal of Southeast University(Natural Science Edition),2013,43(3):565-570.
[22]焦安亮,张 鹏,郜玉芬,等.装配式环筋扣合锚接混凝土剪力墙竖向连接钢筋锚固性能机理研究[J].工业建筑,2019,49(1):69-76,129.
JIAO Anliang,ZHANG Peng,GAO Yufen,et al.Research on anchoring performance mechanism of vertical connection of prefabricated shear walls with annular closed reinforcements[J].Industrial Construction,2019,49(1):69-76,129.
[23]李宁波,钱稼茹,叶列平,等.竖向钢筋套筒挤压连接的预制钢筋混凝土剪力墙抗震性能试验研究[J].建筑结构学报,2016,37(1):31-40.
LI Ningbo,QIAN Jiaru,YE Lieping,et al.Tests on seismic behavior of precast RC shear walls with vertical rebar splicing by pressed sleeve[J].Journal of Building Structures,2016,37(1):31-40.
[24]ZHANG F S,DING Y N,XU J,et al.Shear strength prediction for steel fiber reinforced concrete beams without stirrups[J].Engineering Structures,2016,127:101-116.
[25]马福栋,邓明科,杨 勇.超高性能混凝土装配整体式框架梁柱节点抗震性能研究[J].工程力学,2021,38(10):90-102.
MA Fudong,DENG Mingke,YANG Yong.Seismic experimental study on a UHPC precast monolithic concrete beam-column connection[J].Engineering Mechanics,2021,38(10):90-102.
[26]郑七振,李会炎,龙莉波,等.基于超高性能混凝土连接的装配式剪力墙抗震性能试验研究[J].工业建筑,2021,51(9):82-89.
ZHENG Qizhen,LI Huiyan,LONG Libo,et al.Experimental research on aseismic performances of prefabricated shear wall connected by UHPC[J].Industrial Construction,2021,51(9):82-89.
[27]李新星,周 泉,李水生.UHPC-钢筋错位连接的预制剪力墙带板结构抗震性能试验研究[J].振动与冲击,2023,42(1):273-281.
LI Xinxing,ZHOU Quan,LI Shuisheng.Aseismic performance tests of precast shear wall-slab structure with UHPC-reinforcement dislocation connection[J].Journal of Vibration and Shock,2023,42(1):273-281.
[28]黄 炜,孙玉娇,张家瑞,等.装配式墙体结构新型连接技术研究现状[J].工业建筑,2020,50(7):181-189.
HUANG Wei,SUN Yujiao,ZHANG Jiarui,et al.Research status of new connection technique of prefabricated wall structure[J].Industrial Construction,2020,50(7):181-189.
[29]WILSON J F,CALLIS E G.The dynamics of loosely jointed structures[J].International Journal of Non-linear Mechanics,2004,39(3):503-514.
[30]王啸霆,李文峰,王 涛,等.采用螺栓连接的预制钢骨剪力墙拟静力试验研究[J].地震工程与工程振动,2013,33(5):167-175.
WANG Xiaoting,LI Wenfeng,WANG Tao,et al.Seismic behavior of precast concrete walls with bolted connections[J].Journal of Earthquake Engineering and Engineering Vibration,2013,33(5):167-175.
[31]薛伟辰,古徐莉,胡 翔,等.螺栓连接装配整体式混凝土剪力墙低周反复试验研究[J].土木工程学报,2014,47(增2):221-226.
XUE Weichen,GU Xuli,HU Xiang,et al.Experimental study of assembled monolithic concrete shear wall with bolted connection under low reversed cyclic loading[J].China Civil Engineering Journal,2014,47(S2):221-226.
[32]赵 斌,王庆杨,吕西林.采用全装配水平接缝的预制混凝土剪力墙抗震性能研究[J].建筑结构学报,2018,39(12):48-55.
ZHAO Bin,WANG Qingyang,LU Xilin.Research on seismic behavior of precast concrete walls with fully assembled horizontal joints[J].Journal of Building Structures,2018,39(12):48-55.
[33]李 然,田春雨,马云飞,等.螺栓连接装配式多层剪力墙抗震性能试验研究[J].建筑结构,2021,51(16):1-7.
LI Ran,TIAN Chunyu,MA Yunfei,et al.Experimental study on seismic performance of precast low-rise concrete shear wall with bolt connection[J].Building Structure,2021,51(16):1-7.
[34]李 妍,成 骞.水平缝螺栓连接的绿色装配式复合剪力墙抗震性能研究[J].建筑结构,2022,52(增1):1784-1787.
LI Yan,CHENG Qian.Study on seismic performance of green assembled composite shear wall bolted horizontally[J].Building Structure,2022,52(S1):1784-1787.
[35]熊 峰,钟亚超,冉明明,等.螺栓连接装配式混凝土墙板结构水平缝的抗震性能研究[J].建筑结构,2022,52(23):35-45,55.
XIONG Feng,ZHONG Yachao,RAN Mingming,et al.Bolt-connected precast RC wall panel structural seismic performance of horizontal joint[J].Building Structure,2022,52(23):35-45,55.
[36]BLAKEY R W G,PARK R.Seismic resistance of prestressed concrete beam-column assemblies[J].ACI Journal Proceedings,1971,68(9):677-692.
[37]KURAMA Y,PESSIKI S,SAUSE R,et al.Seismic behavior and design of unbonded post-tensioned precast concrete walls[J].PCI Journal,1999,44(3):72-89.
[38]蔡小宁,孟少平,孙巍巍,等.无粘结预应力混合装配式联肢墙抗震性能分析[J].建筑结构,2010,40(2):25-27.
CAI Xiaoning,MENG Shaoping,SUN Weiwei,et al.Study on seismic behavior of unbonded post-tensioned hybrid precast coupled wall[J].Building Structure,2010,40(2):25-27.
[39]吴 浩,吕西林.无粘结后张拉预制剪力墙抗震性能模拟分析[J].振动与冲击,2013,32(19):176-182.
WU Hao,LV Xilin.Numerical simulation on seismic performance of unbonded post-tensioned precast shear walls[J].Journal of Vibration and Shock,2013,32(19):176-182.
[40]胡 邦.后张无粘结预应力装配式剪力墙力学性能研究[D].重庆:重庆大学,2017.
HU Bang.Reserach on the mechanical performance of unbonded post-tensioned precast walls[D].Chongqing:Chongqing University,2017.
[41]韩文龙,钱稼茹,张微敬,等.预制空心板剪力墙抗震性能试验研究[J].建筑结构学报,2020,41(2):32-41.
HAN Wenlong,QIAN Jiaru,ZHANG Weijing,et al.Experimental study on seismic behavior of precast concrete hollow shear walls[J].Journal of Building Structures,2020,41(2):32-41.
[42]吴 刚,蒋剑彪,吴智深,等.预应力高强钢丝绳抗弯加固钢筋混凝土梁的试验研究[J].土木工程学报,2007,40(12):17-27.
WU Gang,JIANG Jianbiao,WU Zhishen,et al.Experimental study on flexural strengthening of RC beams with prestressed high strength steel wire ropes[J].China Civil Engineering Journal,2007,40(12):17-27.
[43]黄 远,许 铭,张 锐.全装配式混凝土结构界面软索连接拼缝抗剪性能试验研究[J].湖南大学学报(自然科学版),2014,41(6):22-27.
HUANG Yuan,XU Ming,ZHANG Rui.Experimental study of the shear behavior of total precast concrete structures with steel cable connections[J].Journal of Hunan University(Natural Sciences),2014,41(6):22-27.
[44]刘 亨,徐其功.全装配式混凝土墙板结构的竖向接缝研究[J].建筑结构,2018,48(7):68-72.
LIU Heng,XU Qigong.Research on vertical joint of full prefabricated concrete panel structure[J].Building Structure,2018,48(7):68-72.
[45]杜红凯,王世伟,韩 淼,等.软索连接装配式混凝土圆孔墙抗震性能试验研究[J].土木工程学报,2020,53(8):9-15.
DU Hongkai,WANG Shiwei,HAN Miao,et al.Experimental simulation on seismic behavior of prefabricated concrete circular-hole wall connected by flexible cables[J].China Civil Engineering Journal,2020,53(8):9-15.
[46]韩 淼,孙 猛,杜红凯,等.软索连接装配式混凝土构件接缝受剪性能研究[C]//中冶建筑研究总院有限公司.2021年工业建筑学术交流会论文集(中册).北京:《工业建筑》杂志社,2021:105-109.
HAN Miao,SUN Meng,DU Hongkai,et al.Study on joint shear performance of soft cable connection prefabricated concrete components[C]//MCC Construction Research Institute Co.,Ltd..Proceedings of 2021 Industrial Construction Academic Exchange Conference(Medium Volume).Beijing:Industrial Construction Press,2021:105-109.
[47]JOERGENSEN H B,HOANG L C.Tests and limit analysis of loop connections between precast concrete elements loaded in tension[J].Engineering Structures,2013,52:558-569.
[48]李 然,田春雨,马云飞.竖向接缝钢锚环灌浆连接装配式多层剪力墙抗震性能试验研究[J].建筑结构学报,2020,41(增2):123-132.
LI Ran,TIAN Chunyu,MA Yunfei.Experimental study on seismic performance of precast low-rise concrete shear wall with steel anchor-ring connection[J].Journal of Building Structures,2020,41(S2):123-132.
[49]SRENSEN J H,HOANG L C,FISCHER G,et al.Construction-friendly ductile shear joints for precast concrete panels[C]//The University of Queensland.Proceedings of the Second International Conference on Performance-based and Life-cycle Structural Engineering(PLSE 2015).Brisbane:The University of Queensland,2015:640-649.
[50]初明进,王 博,刘继良,等.榫卯式接缝预制混凝土剪力墙受力性能试验研究[J].建筑结构学报,2021,42(7):173-182,222.
CHU Mingjin,WANG Bo,LIU Jiliang,et al.Experimental study on mechanical behavior of precast concrete shear walls with mortise-tenon joints[J].Journal of Building Structures,2021,42(7):173-182,222.
[51]刘继良,王宝民,罗玉萍,等.不同接缝构造的装配整体式剪力墙受力性能试验研究[J].建筑结构,2021,51(9):15-22.
LIU Jiliang,WANG Baomin,LUO Yuping,et al.Experimental study on mechanical behavior of assembled monolithic shear walls with different joints[J].Building Structure,2021,51(9):15-22.
[52]武盛韬.榫卯接缝钢筋连接性能试验研究[D].北京:北京建筑大学,2022.
WU Shengtao.Experimental study on connection performance of mortise-tenon joint[D].Beijing:Beijing University of Civil Engineering and Architecture,2022.
[53]HOFHEINS C L,REAVELEY L D,PANTELIDES C P.Behavior of welded plate connections in precast concrete panels under simulated seismic loads[J].PCI Journal,2002,47(4):122-133.
[54]TAGAWA H,HIRAMATSU M,MASUO K,et al.Structural performance of precast-concrete joints utilizing non-welded splice in precast-wall RC structures[J].Journal of Structural and Construction Engineering,2011,76(670):2133-2141.
[55]黄昌辉.带竖向接缝装配式剪力墙抗震性能试验及设计方法研究[D].广州:华南理工大学,2017.
HUANG Changhui.Experimental study on seismic performance and design method of pre-cast shear walls with vertical joints[D].Guangzhou:South China University of Technology,2017.
[56]宋国华,王东炜,滕海文,等.装配式钢筋混凝土结构竖缝抗剪承载力研究及国内外规范的比较[J].世界地震工程,2005,21(2):125-128.
SONG Guohua,WANG Dongwei,TENG Haiwen,et al.Study on shear resistance of a vertical connection in PRC structures and comparison among building codes of different countries[J].World Information on Earthquake Engineering,2005,21(2):125-128.
[57]刘继新,李文峰,王啸霆,等.新型装配整体式墙体抗震性能试验研究[J].地震工程与工程振动,2012,32(6):110-118.
LIU Jixin,LI Wenfeng,WANG Xiaoting,et al.Seismic behavior of a new assembled monolithic concrete wall structure[J].Journal of Earthquake Engineering and Engineering Vibration,2012,32(6):110-118.
[58]徐 咏,熊 峰,陈 江.装配式剪力墙竖向焊接节点抗剪性能[J].湖南大学学报(自然科学版),2018,45(5):53-61.
XU Yong,XIONG Feng,CHEN Jiang.Shear behavior of vertical welded connection in precast shear wall[J].Journal of Hunan University(Natural Sciences),2018,45(5):53-61.
[59]PANTELIDES C P,VOLNYY V A,GERGELY J,et al.Seismic retrofit of precast concrete panel connections with carbon fiber reinforced polymer composites[J].PCI Journal,2003,48(1):92-104.
[60]NYE T K,PANTELIDES C P,BURNINGHAM C A.Unidirectional GFRP composite connections between precast concrete wall panels under simulated seismic loads[J].Composite Structures,2018,203:624-635.
[61]ABOUHAMDAH I S,AL-OSTA M A,BALUCH M H,et al.Structural behavior of cast-in C-channel anchors in precast concrete under uniaxial tension[J].Structural Concrete,2018,19(4):1157-1173.
[62]王 威,熊 峰,徐锦祥,等.预制装配式混凝土墙板螺栓连接抗剪性能试验研究[J].四川大学学报(工程科学版),2016,48(增2):86-92.
WANG Wei,XIONG Feng,XU Jinxiang,et al.Experimental study on shear behavior of the bolt connection of prefabricated concrete wallboard[J].Journal of Sichuan University(Engineering Science Edition),2016,48(S2):86-92.
[63]陈 文,熊 峰,陈 江,等.干式连接装配式墙体结构抗震性能试验研究[J].建筑结构学报,2018,39(10):56-64.
CHEN Wen,XIONG Feng,CHEN Jiang,et al.Experimental study on seismic behavior of prefabricated panel structure by dry connectors[J].Journal of Building Structures,2018,39(10):56-64.
[64]SUN J A,QIU H X,JIANG H B.Lateral load behaviour of a rectangular precast shear wall involving vertical bolted connections[J].Advances in Structural Engineering,2019,22(5):1211-1224.
[65]于海丰,郝孟天,麻建锁,等.采用预埋钢板-螺栓竖缝连接的装配式剪力墙拟静力试验及数值分析[J].工业建筑,2020,50(5):24-30.
YU Haifeng,HAO Mengtian,MA Jiansuo,et al.Quasi-static test and numerical analysis of prefabricated shear wall with vertical connections of embedded steel plate and bolt[J].Industrial Construction,2020,50(5):24-30.
[66]黄 炜,苗欣蔚,赵媛媛,等.不同竖向接缝干式连接的全装配式复合墙体抗震性能试验研究[J].建筑结构学报,2020,41(增2):114-122.
HUANG Wei,MIAO Xinwei,ZHAO Yuanyuan,et al.Experimental study on seismic performance of fully assembled composite walls with vertical joints using different dry connections[J].Journal of Building Structures,2020,41(S2):114-122.
[67]沈绍冬,苏宇坤,潘 鹏.装配式干式连接剪力墙的设计方法研究[J].工程力学,2022,39(10):182-189,199.
SHEN Shaodong,SU Yukun,PAN Peng.Study on the design approach of precast shear walls with dry connection[J].Engineering Mechanics,2022,39(10):182-189,199.
[68]CLOUGH R W,MALHAS F,OLIVA M G.Seismic behavior of large panel precast concrete walls:analysis and experiment[J].PCI Journal,1989,34(5):42-66.
[69]PEKAU O A,HUM D.Seismic response of friction jointed precast panel shear walls[J].PCI Journal,1991,36(2):56-71.
[70]FERRARA L,FELICETTI R,TONIOLO G,et al.Friction dissipative devices for cladding panels in precast buildings.an experimental investigation[J].European Journal of Environmental and Civil Engineering,2011,15(9):1319-1338.
[71]NEGRO P,LAMPERTI TORNAGHI M.Seismic response of precast structures with vertical cladding panels:the SAFECLADDING experimental campaign[J].Engineering Structures,2017,132:205-228.
[72]方 强,邱洪兴,孙 建,等.有限滑动螺栓连接装配式混凝土剪力墙抗震性能试验研究[J].东南大学学报(自然科学版),2021,51(4):559-565.
FANG Qiang,QIU Hongxing,SUN Jian,et al.Experimental study on seismic performance of precast concrete shear walls with limited slip bolted connectors[J].Journal of Southeast University(Natural Science Edition),2021,51(4):559-565.
[73]张偲严,李宏男,李 超.装配式剪力墙高效阻尼器耗能连接的简化模型研究与数值分析[J].建筑结构学报,2019,40(10):61-68.
ZHANG Caiyan,LI Hongnan,LI Chao.Simplified model development and numerical simulation of a high-efficiency energy-dissipating joint for prefabricated concrete shear walls[J].Journal of Building Structures,2019,40(10):61-68.
[74]CRISAFULLI F J,RESTREPO J I.Ductile steel connections for seismic resistant precast buildings[J].Journal of Earthquake Engineering,2003,7(4):541-553.
[75]GHABRAIE K,CHAN R,HUANG X D,et al.Shape optimization of metallic yielding devices for passive mitigation of seismic energy[J].Engineering Structures,2010,32(8):2258-2267.
[76]KIM Y J,AHN T S,BAE J H,et al.Experimental study of using cantilever type steel plates for passive energy dissipation[J].International Journal of Steel Structures,2016,16(3):959-974.
[77]DAL LAGO B,BIONDINI F,TONIOLO G.Experimental tests on multiple-slit devices for precast concrete panels[J].Engineering Structures,2018,167:420-430.
[78]吴晓龙,李宏男,马荣全,等.设置金属阻尼器的预制装配式剪力墙结构抗震性能分析[J].地震工程与工程振动,2016,36(5):46-54.
WU Xiaolong,LI Hongnan,MA Rongquan,et al.Seismic performance of prefabricated shear wall structure with metallic damper[J].Earthquake Engineering and Engineering Dynamics,2016,36(5):46-54.
[79]党隆基.竖向耗能接缝装配式剪力墙抗震性能与机理研究[D].南京:东南大学,2021.
DANG Longji.Study on seismic performance and mechanism of precast shear wall with vertical energy-dissipating connection[D].Nanjing:Southeast University,2021.
[80]VAGHEI R,HEJAZI F,TAHERI H,et al.Development of a new connection for precast concrete walls subjected to cyclic loading[J].Earthquake Engineering and Engineering Vibration,2017,16(1):97-117.
[81]PEREZ F J,PESSIKI S,SAUSE R.Seismic design of unbonded post-tensioned precast concrete walls with vertical joint connectors[J].PCI Journal,2004,49(1):58-79.
[82]SRITHARAN S,AALETI S,THOMAS D J.Seismic analysis and design of precast concrete jointed wall systems[R].Ames:Iowa State University,2007.
[83]HENRY R S,SRITHARAN S,INGHAM J M.Finite element analysis of the PreWEC self-centering concrete wall system[J].Engineering Structures,2016,115:28-41.
[84]GUO T,WANG L,XU Z K,et al.Experimental and numerical investigation of jointed self-centering concrete walls with friction connectors[J].Engineering Structures,2018,161:192-206.
[85]徐 刚,张瑞君,李爱群.装配式夹心剪力墙结构抗震性能研究[J].建筑结构学报,2020,41(9):56-67.
XU Gang,ZHANG Ruijun,LI Aiqun.Seismic behavior of precast sandwich shear wall structure[J].Journal of Building Structures,2020,41(9):56-67.
[86]钱云峰,杨鼎宜,夏旸昊,等.热水养护对超高性能混凝土力学性能及水化过程的影响[J].材料科学与工程学报,2023,41(2):260-268.
QIAN Yunfeng,YANG Dingyi,XIA Yanghao,et al.Influence of hot water curing on mechanical properties and hydration process of ultra-high performance concrete[J].Journal of Materials Science and Engineering,2023,41(2):260-268.
[87]汪梦甫,曾雨薇.带可更换摩擦耗能器组合剪力墙抗震性能试验研究[J].地震工程与工程振动,2020,40(6):36-46.
WANG Mengfu,ZENG Yuwei.Experimental study on seismic performance of combined shear wall with replaceable friction dampers[J].Earthquake Engineering and Engineering Dynamics,2020,40(6):36-46.

Memo

Memo:
-
Last Update: 2024-01-25