|Table of Contents|

Influence of Inserted Plate on Behavior of Flush End-plate Beam-to-column Joints(PDF)

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

Issue:
2009年04期
Page:
7-13
Research Field:
Publishing date:
2009-12-20

Info

Title:
Influence of Inserted Plate on Behavior of Flush End-plate Beam-to-column Joints
Author(s):
LI Guo-qiang1; 2;  SI Yang2;  HAO Kun-chao3
1. State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University, Shanghai 200092, China; 2. School of Civil Engineering, Tongji University, Shanghai 200092, China; 3. China Jingye Engineering Corporation Limited, Shanghai 201206, China
Keywords:
semi-rigid;  inserted plate;  end-plate;  joint;  finite element analysis;  nonlinear analysis;  component method
PACS:
TU375
DOI:
-
Abstract:
The flush end-plate beam-to-column joints with inserted plate were modeled using finite element software ANSYS and component method provided in Eurocode 3. The modeled results were compared with experimental results. The results show that the finite element analysis and the experimental data give the similar moment-rotation curves, hysteretic curves and joint deformations; the rotation capacity and stiffness of this type of joint can be simulated well with the finite element method. The stiffness of the joints with satisfying accuracy can be obtained by using component method. The inserted plate does not influence the behavior of beam-to-column joints.

References:

[1] BAHAARI M R,SHERBOURNE A N.Computer Modelling of an Extended End-plate Bolted Connection[J].Computers & Structures,1994,52(5):879-893.
[2]SHERBOURNE A N,BAHAARI M R.3D Simulation of End-plate Bolted Connections[J].Journal of Structural Engineering,1994,120(11):3122-3136.
[3]SHERBOURNE A N,BAHAARI M R.Finite Element Prediction of End Plate Bolted Connection Be- havior.I:Parametric Study[J].Journal of Structural Engineering,1997,123(2):157-164.
[4]CHOI C K,CHUNG G T.Refined Three-dimensional Finite Element Model for End-plate Connection[J].Journal of Structural Engineering,1996,122(11):1307-1316.
[5]Eurocode 3,Design of Steel Structures.Part 1.8:Design of Joints[S].
[6]潘建荣,王 湛,张 吉.框架组合梁柱节点的非线性有限元分析[J].西安建筑科技大学学报:自然科学版,2009,41(5):654-662. PAN Jian-rong,WANG Zhan,ZHANG Ji.Nonlinear Finite Element Analysis of Frame Composite Joints[J].Journal of Xi'an University of Architecture & Technology:Natural Science Edition,2009,41(5):654-662.
[7]卢小松,顾 强.钢框架梁柱栓-焊混合连接极限弯矩的计算[J].西安建筑科技大学学报:自然科学版,2008,40(4):491-498. LU Xiao-song,GU Qiang.The Moment Capacity of Welded-bolted Beam to Column Connections in Steel Framework[J].Journal of Xi'an University of Architecture & Technology:Natural Science Edition,2008,40(4):491-498.
[8]张淑云,白国良,李红星,等.钢筋混凝土框架异型节点抗剪承载力研究[J].西安科技大学学报,2006,26(2):170-174. ZHANG Shu-yun,BAI Guo-liang,LI Hong-xing,et al.Anti-shear Capacity of Abnormal Joints of RC Frame[J].Journal of Xi'an University of Science and Technology,2005,26(2):170-174.
[9]綦春明,张志恒.高层钢筋砼框架结构布置与梁柱截面尺寸整体优化设计研究[J].西安建筑科技大学学报:自然科学版,2008,40(4):574-579. QI Chun-ming,ZHANG Zhi-heng.Study on the Optimization of Structure Layout and Section Sizes of High-rise Reinforced Concrete Beam-columnFrames[J].Journal of Xi'an University of Architecture & Technology:Natural Science Edition,2008,40(4):574-579.
[10]司 洋,李国强,郝坤超.垫板对平齐式端板连接梁柱节点性能影响的试验研究[J].建筑结构学报,2009,30(5):48-56. SI Yang,LI Guo-qiang,HAO Kun-chao.Experimental Research on Influence of Inserted Plate on Behavior of Semi-rigid Beam-to-column Joints[J].Journal of Building Structures,2009,30(5):48-56.

Memo

Memo:
-
Last Update: 2009-12-20