|Table of Contents|

Experimental Research on Concrete-Filled Steel Tube Truss Girder Under Bending(PDF)

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

Issue:
2006年01期
Page:
29-33
Research Field:
Publishing date:
2006-03-20

Info

Title:
Experimental Research on Concrete-Filled Steel Tube Truss Girder Under Bending
Author(s):
HUANG Wen-jin12 CHEN Bao-chun1
1. School of Civil Engineering and Architecture, Fuzhou University, Fuzhou 350002, Fujian, China; 2. School of Transportation, Fujian Agriculture and Forestry University, Fuzhou 350002, Fujian, China
Keywords:
concrete-filled steel tube truss girder experimental research ultimate load capacity tubular joint
PACS:
U528.59
DOI:
-
Abstract:
In order to make further investigation into the global action of concrete-filled steel tube(CFST)truss girder, experiment of CFST truss girder specimen under symmetrically quarter loading was carried out. Specimen of CFST truss girder was fabricated according to dimensions of stiffening girder and truss arch rib of several built bridges and code for design of steel tube structure. Based on the measured deflection and strain of specimen during experiment, the deformation, strain increasing mode of steel tube, failure mode and load-carrying capacity of joints as well as the whole girder were analyzed. The test result shows that deflection of CFST truss girder is mainly attributed to deformation of shear-bending parts and much smaller than that of solid web girder. The behaviors of joints are complex and its ultimate load capacity will control that of the truss girder. Filled concrete in the chord tubes can increase the member's radial rigidity and keep it from plastic failure thus strengthens the joints. Under the symmetrically quarter loading, axial forces in web members for CFST welding truss girder are commonly less than that of hinged truss, and the chord members are subjected to prominent bending moment. Before the failure of joints, obvious shear deformation among web members can be observed during shearing-bending parts.

References:

[1] 沃登尼尔 J.钢管截面的结构应用[M].上海:同济大学出版社,2004. WARDENIER J.Construction Application of Steel Tubular Section[M].Shanghai:Tongji University Press,2004.
[2]陈以一,陈扬骥.钢管结构相贯节点的研究现状[J].建筑结构,2002,32(7):52-55. CHEN Yi-yi,CHEN Yang-ji.Research Actuality of Steel Tubular Structure Joints[J].Building Construction,2002,32(7):52-55.
[3]聂建国,秦 凯,张桂标.方钢管混凝土内隔板式节点的抗弯承载力研究[J].建筑科学与工程学报,2005,22(1):42-49. NIE Jian-guo,QIN Kai,ZHANG Gui-biao.Experimental Research and Theoretical Analysis on Flexural Capacity of Connections for Concrete-Filled Steel Square Tubular Columns with Inner Diaphragms[J].Journal of Architecture and Civil Engineering,2005,22(1):42-49.
[4]赵均海,郭红香,魏雪英.圆中空夹层钢管混凝土柱承载力研究[J].建筑科学与工程学报,2005,22(1):50-54. ZHAO Jun-hai,GUO Hong-xiang,WEI Xue-ying.Research on Bearing Capacity of Concrete Filled Double Skin Steel Tubes Column[J].Journal of Architecture and Civil Engineering,2005,22(1):50-54.
[5]YOSHINAGA S.Experiments on Concrete Filled and Reinforced Tubular K-Joints of Truss Girder[J].Journal of Constructional Steel Research,2004,60(5):683-689.
[6]庞守献.钢管混凝土梁模型的疲劳试验与分析[J].铁道建筑技术,1997,14(3):8-12. PANG Shou-xian.Fatigue Experiment and Analysis of Concrete Filled Steel Tubular Model[J].Railway Construction Technology,1997,14(3):8-12.
[7]蔡绍怀.钢管混凝土抗弯强度的试验研究[J].建筑结构,1985,15(3):28-29. CAI Shao-huai. Experimental Research on Bending Strength of Concrete Filled Steel Tubular[J].Building Construction,1985,15(3):28-29.
[8]陈宝春,盛 叶,韦建刚.钢管混凝土哑铃型梁受弯试验研究[J].工程力学,2005,22(4):119-125. CHEN Bao-chun, SHENG Ye,WEI Jian-gang.Experimental Study of Concrete Filled Steel Tubular Dumbbell-Shaped Beam Under Bending[J].Engineering Mechanics,2005,22(4):119-125.
[9]PACKER J A,HENDERSON J E,CAO J J.空心管结构连接设计指南[M].北京:科学出版社,1997. PACKER J A,HENDERSON J E,CAO J J.Hollow Tubular Structure Joint Design Guide[M].Beijing: Science Press,1997.
[10]GB 50017-2003,钢结构设计规范[S]. GB 50017-2003,Steel Structure Design Code[S].

Memo

Memo:
-
Last Update: 2006-03-20