|Table of Contents|

Minimum Reinforcement Ratio of Tensile Reinforcement for Concrete Flexural Members(PDF)

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

Issue:
2011年01期
Page:
6-10
Research Field:
Publishing date:
2011-03-20

Info

Title:
Minimum Reinforcement Ratio of Tensile Reinforcement for Concrete Flexural Members
Author(s):
QU Wen-jun FANG Jin ZHOU Guo-quan
School of Civil Engineering, Tongji University, Shanghai 200092, China
Keywords:
reinforced concrete flexural member tensile reinforcement minimum reinforcement ratio seismic frame beam
PACS:
TU352.1
DOI:
-
Abstract:
Authors simply analyzed the minimum reinforcement ratio and its determination principles under the non-seismic-resistance and seismic-resistance situations, which were referred to the Chinese concrete design codes in different periods. Meanwhile, the values and determinations of the minimum reinforcement ratio of tensile reinforcement for concrete flexural members under two circumstances were comparative analyzed. Limiting values of the minimum reinforcement ratios in different codes were compared through an example, and the method to determine the minimum reinforcement ratios was suggested. The results show that the concrete design codes of different countries described “the member is not failure immediately after cracking” as the principle to determine the minimum reinforcement ratio. There is a big difference on the minimum reinforcement ratio for non-seismic-resistance member in each code, but for seismic-resistance area, the reinforcement ratio is quite similar in each code, except that the reinforcement ratio in Chinese code is lower than the others.

References:

[1] 徐友邻,周 氐.混凝土结构设计规范理解与应用[M].北京:中国建筑工业出版社,2002. XU You-lin,ZHOU Di.Comprehension and Application on Code for Design of Concrete Structures[M].Beijing:China Architecture & Building Press,2002.
[2]GB 50010—2002,混凝土结构设计规范[S]. GB 50010—2002,Code for Design of Concrete Structures[S].
[3]顾祥林.混凝土结构基本原理[M].上海:同济大学出版社,2004. GU Xiang-lin.Basic Principles of Concrete Structures[M].Shanghai:Tongji University Press,2004.
[4]ACI 318-05,Building Code Requirements for Structural Concrete(ACI 318-05)and Commentary[S].
[5]CSA A23.3-04,Design of Concrete Structures[S].
[6]CEB-FIP,Model Code 1990[S].
[7]EN 1992-1-1:2004,Eurocode 2:Design of Concrete Structures.Part 1-1:General Rules and Rules for Buildings[S].
[8]EN 1998-1-1:2004,Eurocode 8:Design of Structures for Earthquake Resistance.Part 1:General Rules,Seismic Actions and Rules for Buildings[S].
[9]DIN 1045-1,Plain,Reinforced and Presressed Concrete Structures.Part-1:Design and Construction[S].
[10]BS 8110-1:1997,Structural Use of Concrete.Part 1:Code of Practice for Design and Construction[S].

Memo

Memo:
-
Last Update: 2011-03-20