|Table of Contents|

Seismic Performance of Buckling-restrained Braced Structural System of Air-cooled Condenser(PDF)

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

Issue:
2011年04期
Page:
9-18
Research Field:
Publishing date:
2011-12-20

Info

Title:
Seismic Performance of Buckling-restrained Braced Structural System of Air-cooled Condenser
Author(s):
GUO Yan-lin1 WANG Xiao-an1 JIANG Zi-qin1 BAI Guo-liang2
1. Department of Civil Engineering, Tsinghua University, Beijing 100084, China; 2. School of Civil Engineering, Xi'an University of Architecture & Technology, Xi'an 710055, Shaanxi, China
Keywords:
air-cooled condenser buckling-restrained brace seismic performance time history mass eccentricity torsion deformation
PACS:
TU352.1
DOI:
-
Abstract:
Through time history analysis under single-component earthquake excitations, the deficiencies of the seismic performance of the exiting structural system of air-cooled condenser were pointed out. Comparisons between the structural system with and without buckling-restrained braced(BRB)supporting systems were carried out. The mechanical behaviors of BRB structural system of air-cooled condenser under two-component earthquake excitations were preliminarily studied, and a connecting procedure of the super-long BRB was proposed. The results show that the influences of overall torsion deformation under earthquake excitations are prohibited efficiently by adding BRB to the existing structural system of air-cooled condenser, and the torsion deformation has an increase trend after yielding of the BRB in two-component arrangement of the structural system.

References:

[1] 张建华.大型直接空冷凝汽器支撑结构总体设计及力学计算[D].哈尔滨:哈尔滨工业大学,1998. ZHANG Jian-hua.General Design and Mechanical Calculation on Large Direct Air Cooled Condenser Support Structure[D].Harbin:Harbin Institute of Technology,1998.
[2]白国良,刘 林,李晓文,等.空冷支架结构基于内容物的性能设计方法研究[J].建筑结构学报,2008,29(5):107-113. BAI Guo-liang,LIU Lin,LI Xiao-wen,et al.Study on Performance Design Method Based on Internal Equipment of Support Structure System of Air Cooled Condenser[J].Journal of Building Structures,2008,29(5):107-113.
[3]白国良,朱丽华,赵春莲,等.工作荷载与地震作用下直接空冷结构体系模型试验研究[J].建筑结构学报,2008,29(5):42-49. BAI Guo-liang,ZHU Li-hua,ZHAO Chun-lian,et al.Model Test on Behavior of Direct Air Cooled Condenser Support Platform Under Service Load and Earthquake Action[J].Journal of Building Structures,2008,29(5):42-49.
[4]姚泽良,白国良,党发宁,等.钢桁架-钢筋混凝土管柱结构抗震性能研究[J].建筑结构学报,2011,32(1):30-36. YAO Ze-liang,BAI Guo-liang,DANG Fa-ning,et al.Study on Seismic Behavior of a Steel Truss-reinforced Concrete Column Structure[J].Journal of Building Structures,2011,32(1):30-36.
[5]郭彦林,王小安,江磊鑫.装配式防屈曲支撑构件及框架设计理论[J].结构工程师,2010,26(6):164-176. GUO Yan-lin,WANG Xiao-an,JIANG Lei-xin.Design Theory of Assembled Buckling-restrained Braces and Buckling-restrained Braced Frames[J].Structural Engineers,2010,26(6):164-176.
[6]郭彦林,刘建彬,蔡益燕,等.结构的耗能减震与防屈曲支撑[J].建筑结构,2005,35(8):18-23. GUO Yan-lin,LIU Jian-bin,CAI Yi-yan,et al.Structural Energy Dissipation and Seismic Mitigation Method and Buckling-restrained Brace[J].Building Structure,2005,35(8):18-23.
[7]徐培福,黄吉锋,韦承基.高层建筑结构在地震作用下的扭转振动效应[J].建筑科学,2000,16(1):1-6. XU Pei-fu,HUANG Ji-feng,WEI Cheng-ji.Response of Torsional Vibration of Tall Building Structures Induced by Seismic Action[J].Building Science,2000,16(1):1-6.
[8]刘 畅.地震作用下偏心结构扭转反应研究[D].长沙:湖南大学,2007. LIU Chang.Study on Torsion Response of Eccentric Structures Under Seismic Action[D].Changsha:Hunan University,2007.
[9]刘 畅,邹银生.偶然偏心引起的结构地震扭转效应研究[J].工程抗震与加固改造,2006,28(3):12-14,20. LIU Chang,ZOU Yin-sheng.Response of Seismic Torsional Vibration Induced by Accidental Eccentri-city[J].Earthquake Resistant Engineering and Retrofitting,2006,28(3):12-14,20.
[10]GB 50011—2010,建筑抗震设计规范[S]. GB 50011—2010,Code for Seismic Design of Buildings[S].
[11]郭彦林,江磊鑫.双矩管带肋约束型装配式防屈曲支撑的设计方法[J].建筑科学与工程学报,2010,27(2):67-74. GUO Yan-lin,JIANG Lei-xin.Design Method of Buckling-restrained Braces Assembled with Dual Ribbed Rectangular Hollow[J].Journal of Architecture and Civil Engineering,2010,27(2):67-74.
[12]江磊鑫,郭彦林.屈曲延迟型增强构件的设计方法[J].建筑科学与工程学报,2010,27(2):75-82. JIANG Lei-xin,GUO Yan-lin.Design Method of Buckling-delayed Reinforced Members[J].Journal of Architecture and Civil Engineering,2010,27(2):75-82.

Memo

Memo:
-
Last Update: 2011-12-20