|Table of Contents|

Determination of Building Area for Expressway Service Area(PDF)

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

Issue:
2012年02期
Page:
123-126
Research Field:
Publishing date:

Info

Title:
Determination of Building Area for Expressway Service Area
Author(s):
CHEN Chuan-de;  XING Li-xia
School of Highway, Chang'an University, Xi'an 710064, Shaanxi, China
Keywords:
expressway;  service area;  building area;  design parameter;  traffic volume
PACS:
TU247
DOI:
-
Abstract:
In order to determine the building area of expressway service area, according to the functions of service area, through several design cases and using research, the influence factors of the building area of service area were analyzed. After on-site investigation and statistical analysis,the main design parameters such as driving-into rate, peak-rate and service facility turnover-rate were obtained. The calculation models which were used to calculate the corresponding building area were established. According to the above models, the total building areas for expressway service area were obtained under different traffic volumes and different traffic compositions. Results show that the traffic volume, traffic composition, service requirements and service facilities turnover-rate are the main factors which influence the building area. The research results can provide reference for determination of building area for expressway service area.

References:

[1] 中华人民共和国交通部.公路建设项目用地指标[M].北京:人民交通出版社,1999. Ministry of Transport of Peoples' Republic of China.Highway Construction Project Sites for Indicators [M].Beijing:China Communications Press,1999.
[2]Federal Highway Administration.Report to Congress:Study of Adequacy of Parking Facilities [R].Washington DC:Federal Highway Administration,2002.
[3]Washington State Department of Transportation.Safety Rest Area Study[R].Olympia:Washington State Department of Transportation,2000.
[4]JTG B01—2003,公路工程技术标准[S]. JTG B01—2003,Technical Standard of Highway Engineering[S].
[5]陈传德,邢利霞.高速公路服务区合理规模的确定[J].公路,2010(11):196-198. CHEN Chuan-de,XING Li-xia.Determination of Reasonable Scale of Freeway Service Area[J].Highway,2010 (11):196-198.
[6]刘孔杰,崔洪军.高速公路服务区规划设计[M].北京:中国建筑工业出版社,2009. LIU Kong-jie,CUI Hong-jun.Freeway Service Area Planning and Design[M].Beijing:China Architecture & Building Press,2009.
[7]JTG D80—2006,高速公路交通工程及沿线设施设计规范[S]. JTG D80—2006,General Specification of Freeway Traffic Engineering and Roadside Facilities[S].
[8]李峻利.交通工程设施设计[M].北京:人民交通出版社,2004. LI Jun-li.Traffic Engineering Facility Design[M].Beijing:China Communications Press,2004.

Memo

Memo:
-
Last Update: 2012-06-20