|Table of Contents|

Experimental on New Type of Two-way Composite Floor Slab with Recycling Truss Ribs(PDF)

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

Issue:
2020年02期
Page:
27-34
Research Field:
Publishing date:

Info

Title:
Experimental on New Type of Two-way Composite Floor Slab with Recycling Truss Ribs
Author(s):
WU Fang-bo1 LI Bo1 WEN Jun1 QIN Hao2 ZHOU Xu-hong12
(1. College of Civil Engineering, Hunan University, Changsha 410082, Hunan, China; 2. School of Civil Engineering, Chongqing University, Chongqing 400044, China)
Keywords:
composite floor slab mechanical property static load test deflection construction phase use phase
PACS:
TU973.2
DOI:
10.19815/j.jace.2019.02040
Abstract:
In order to study the mechanical property of new type of two way composite floor with recycling truss ribs, the static load tests of two new composite bidirectional plates with different reinforcements and one cast-in-place bidirectional plate were carried out. The simulated loading test was carried out for the new type of composite bidirectional slab in the construction stage. The deflection of prefabricated slab under construction load was tested without support. The basic mechanical properties such as crack distribution, failure mode, stiffness change, deflection, cracking load, bending capacity and overall working performance were compared and analyzed. The results show that the deflection limit of prefabricated slab in construction stage meets the requirements of specifications. The truss ribs play a supporting role in the construction stage of the new composite bidirectional slab, and the truss ribs bear the construction load. The crack distribution, failure mode and bearing capacity of the new composite bidirectional slab and the cast-in-place bidirectional slab are basically the same, and the cracking load is earlier than that of the cast-in-place bidirectional slab. Compared with the cast-in-place bidirectional slab, the existence of laminated layer and embedded parts in the new composite bidirectional slab weakens the integrity of the slab to some extent, but the influence is relatively small. In the case that the area of reinforcement is basically the same, the use of fine reinforcement in the prefabricated plate can improve the anti-cracking performance of the composite bi-directional plate. In the use stage, the structure measures of the natural rough surface can ensure the shear resistance of the composite surface. In the elastic stress stage, the precast plate and the post-cast layer can work together and have good integrity.

References:

[1] 周绪红,邓利斌,吴方伯,等.预制混凝土叠合楼板耐火性能试验研究及有限元分析[J].建筑结构学报,2015,36(12):82-90.
ZHOU Xu-hong,DENG Li-bin,WU Fang-bo,et al.Experimental Research and FEA on Fire Resistance Performance of Precast Concrete Composite Slabs[J].Journal of Building Structures,2015,36(12):82-90.
[2]ROBERTS-WOLLMANN C L,GUIROLA M,EASTERLING W S.Strength and Performance of Fiber-reinforced Concrete Composite Slabs[J].Journal of Structural Engineering,2004,130(3):520-528.
[3]HASSAN A,KAWAKAMI M.Steel-free Composite Slabs Made of Reactive Powder Materials and Fiber-reinforced Concrete[J].ACI Structural Journal,2005,102(5):709-718.
[4]LUKASZEWSKA E,FRAGIACOMO M,JOHNSSON H.Laboratory Tests and Numerical Analyses of Prefabricated Timber-concrete Composite Floors[J].Journal of Structural Engineering,2010,136(1):46-55.
[5]SEBASTIAN W M,MCCONNE R E.Nonlinear FE Analysis of Steel-concrete Composite Structures[J].Journal of Structural Engineering,2000,126(6):662-674.
[6]BOUGUERRA K,AHMED E A,EL-GAMAL S,et al.Testing of Full-scale Concrete Bridge Deck Slabs Reinforced with Fiber-reinforced Polymer(FRP)Bars[J].Construction and Building Materials,2011,25(10):3956-3965.
[7]CARVELLI V,PISANI M A,POGGI C.Fatigue Behaviour of Concrete Bridge Deck Slabs Reinforced with GFRP Bars[J].Composites Part B:Engineering,2010,41(7):560-567.
[8]THANOON W A,YARDIM Y,JAAFAR M S,et al.Development of Interlocking Mechanism for Shear Transfer in Composite Floor[J].Construction and Building Materials,2010,24(12):2604-2611.
[9]YARDIM Y,WALEED A M T,JAAFAR M S,et al.AAC-concrete Light Weight Precast Composite Floor Slab[J].Construction and Building Materials,2013,40:405-410.
[10]徐天爽,徐有邻.双向叠合板拼缝传力性能的试验研究[J].建筑科学,2003,19(6):11-14,38.
XU Tian-shuang,XU You-lin.An Experimental Study on Transmission Properties of Joints Between Superposed Slabs[J].Building Science,2003,19(6):11-14,38.
[11]杨建水,韩菊红,王筱敏.四边简支钢筋混凝土叠合板受剪性能探讨[J].郑州大学学报,2002,23(3):98-100.
YANG Jian-shui,HAN Ju-hong,WANG Xiao-min.Investigation Into Shear Properties of Reinforced Concrete Superposed Slabs Simply Supported on Four Sides[J].Journal of Zhengzhou University:Engineering Science,2002,23(3):98-100.
[12]王晓锋.单向预应力双向叠合板楼盖试验研究[D].北京:中国建筑科学研究院,2003.
WANG Xiao-feng.Experimental Study of Two-way Superposed Slab Floor with Prestress in One Way[D].Beijing:China Academy of Building Research,2003.
[13]刘汉朝,蒋青青.倒“T”形叠合简支板的试验研究[J].中南大学学报:自然科学版,2004,35(1):147-150.
LIU Han-chao,JIANG Qing-qing.Experiment of Inverted “T” Simply Supported Composite Slab[J].Journal of Central South University:Science and Technology,2004,35(1):147-150.
[14]沈春祥.预应力混凝土双向叠合板实验研究[D].天津:天津大学,2005.
SHEN Chun-xiang.Experimental Study of a Two-way Prestressed Laminated Concrete Slab[D].Tianjin:Tianjin University,2005.
[15]刘 轶,童根树,李文斌,等.钢筋桁架叠合板性能试验和设计方法研究[J].混凝土与水泥制品,2006(2):57-60.
LIU Yi,TONG Gen-shu,LI Wen-bin,et al.Research on Performance Test and Design Method of Reinforced Truss Composite Slab[J].China Concrete and Cement Products,2006(2):57-60.
[16]陈赛国.四边简支PK预应力叠合楼板试验与分析[D].长沙:湖南大学,2012.
CHEN Sai-guo.Experiment and Analysis of PK Prestressed Concrete Composite Slab on Simple Support[D].Changsha:Hunan University,2012.
[17]吴方伯,朱惠芳,文 俊,等.一种叠合楼板及其施工方法:中国,CN 201510202803X[P].2015-04-26.
WU Fang-bo,ZHU Hui-fang,WEN Jun,et al.A Composite Floor and Its Construction Method:China,CN 201510202803X[P].2015-04-26.
[18] GB 50152—2012,混凝土结构试验方法标准[S].
GB 50152—2012,Standard for Test Method of Concrete Structures[S].
[19]CECS 273:2010,组合楼板设计与施工规范[S].
CECS 273:2010,Code for Composite Slabs Design and Construction Floor[S].
[20]GB 50010—2010,混凝土结构设计规范[S].
GB 50010—2010,Code for Design of Concrete Structures[S].

Memo

Memo:
-
Last Update: 2020-04-21