|Table of Contents|

Elastic-plastic Buckling Behavior of Double-corrugated Thin Steel Plate Under Cyclic Shear Load(PDF)

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

Issue:
2020年04期
Page:
14-22
Research Field:
Publishing date:

Info

Title:
Elastic-plastic Buckling Behavior of Double-corrugated Thin Steel Plate Under Cyclic Shear Load
Author(s):
WANG Yu-hang1 YANG Jun-de1 LIANG Yan-lai2 LAN Yong-sen3 LUO Wei3 DENG Ran1
(1. School of Civil Engineering, Chongqing University, Chongqing 400045, China; 2. Chongqing Technology and Business Institute, Chongqing 401520, China; 3. CSIC Haizhuang Wind Power Co., Ltd, Chongqing 401122, China)
Keywords:
double-corrugated thin steel plate shear capacity elastic-plastic buckling quasi-static test thin steel plate shear wall
PACS:
TU973.2
DOI:
10.19815/j.jace.2019.12040
Abstract:
In order to research the elastic-plastic buckling behavior of double-corrugated thin steel plate upon reaching or approaching steel yield stress, the quasi-static tests of four double-corrugated thin steel plate specimens with different bolt spacings and one single-corrugated thin steel plate specimen subjected to cyclic shear load were completed. The results show that the rationally designed double-corrugated thin steel plate can reach the full-section yield shear capacity firstly, and then the double-corrugated thin steel plate undergo elastic-plastic local shear buckling alternately under cyclic shear load, forming X-shaped buckling folds and tearing cracks to destroy. The ultimate shear capacity of double-corrugated thin steel plate is more than twice that of single-corrugated thin steel plate, and the maximum increase is about 18%. Hysteretic curve of double-corrugated thin steel plate shows a certain pinch phenomenon, and the shear capacity and unloading stiffness of double-corrugated thin steel plate degrade obviously with the increase of hysteresis number after the shear capacity reaches peak value, but its equivalent damping ratio does not decrease significantly. The double-corrugated thin steel plate can be divided into three working stages: elastic, elastic-plastic local buckling and shear capacity degradation. Due to the accordion effect of corrugated steel plate, the double-corrugated thin steel plate has not shear capacity increasing after buckling, and its elastic-plastic local shear buckling state can be defined as ultimate shear capacity state.

References:

[1] 郭彦林,周 明.钢板剪力墙的分类及性能[J].建筑科学与工程学报,2009,26(3):1-13.
GUO Yan-lin,ZHOU Ming.Categorization and Performance of Steel Plate Shear Wall[J].Journal of Architecture and Civil Engineering,2009,26(3):1-13.
[2]郭彦林,董全利.钢板剪力墙的发展与研究现状[J].钢结构,2005,20(1):1-6.
GUO Yan-lin,DONG Quan-li.Research and Application of Steel Plate Shear Wall in High-rise Buildings[J].Steel Construction,2005,20(1):1-6.
[3]聂建国,朱 力,樊健生,等.钢板剪力墙抗震性能试验研究[J].建筑结构学报,2013,34(1):61-69.
NIE Jian-guo,ZHU Li,FAN Jian-sheng,et al.Experimental Research on Seismic Behavior of Steel Plate Shear Walls[J].Journal of Building Structures,2013,34(1):61-69.
[4]赵秋红,李 楠,孙军浩.波纹钢板剪力墙结构的抗侧性能分析[J].天津大学学报:自然科学与工程技术版,2016,49(增):152-160.
ZHAO Qiu-hong,LI Nan,SUN Jun-hao.Analysis on Lateral Performance of Sinusoidally Corrugated Steel Plate Shear Walls[J].Journal of Tianjin University:Science and Technology,2016,49(S):152-160.
[5]王 威,张龙旭,苏三庆,等.波形钢板剪力墙抗震性能试验研究[J].建筑结构学报,2018,39(5):36-44.
WANG Wei,ZHANG Long-xu,SU San-qing,et al.Experimental Research on Seismic Behavior of Corrugated Steel Plate Shear Wall[J].Journal of Building Structures,2018,39(5):36-44.
[6]谭 平,魏 瑶,李 洋,等.波纹钢板剪力墙抗震性能试验研究[J].土木工程学报,2018,51(5):8-15.
TAN Ping,WEI Yao,LI Yang,et al.Experimental Investigation on Performance of Corrugated Steel Plate Shear Wall[J].China Civil Engineering Journal,2018,51(5):8-15.
[7]EASLEY J T,MCFARLAND D E.Buckling of Light-gage Corrugated Metal Shear Diaphragms[J].Journal of the Structural Division,1969,95(7):1497-1516.
[8]EASLEY J T.Buckling Formulas for Corrugated Metal Shear Diaphragms[J].Journal of the Structural Division,1975,101(7):1403-1417.
[9]ELGAALY M,HAMILTON R W,SESHADRI A.Shear Strength of Beams with Corrugated Webs[J].Journal of Structural Engineering,1996,122(4):390-398.
[10]周绪红,孔祥福,侯 健,等.波纹钢腹板组合箱梁的抗剪受力性能[J].中国公路学报,2007,20(2):77-82.
ZHOU Xu-hong,KONG Xiang-fu,HOU Jian,et al.Shear Mechanical Property of Composite Box Girder with Corrugated Steel Webs[J].China Journal of Highway and Transport,2007,20(2):77-82.
[11]聂建国,唐 亮.基于弹性扭转约束边界的波形钢板整体剪切屈曲分析[J].工程力学,2008,25(3):1-7.
NIE Jian-guo,TANG Liang.Global Shear Buckling of Corrugated Steel Plates with Edges Elastically Restrained Against Rotation[J].Engineering Mechanics,2008,25(3):1-7.
[12]EMAMI F,MOFID M,VAFAI A.Experimental Study on Cyclic Behavior of Trapezoidally Corrugated Steel Shear Walls[J].Engineering Structures,2013,48:750-762.
[13]BERMAN J W,BRUNEAU M.Experimental Investigation of Light-gauge Steel Plate Shear Walls[J].Journal of Structural Engineering,2005,131(2):259-267.
[14]赵秋红,邱 静,李 楠,等.梯形波纹钢板剪力墙抗震性能试验研究[J].建筑结构学报,2018,39(增2):112-120.
ZHAO Qiu-hong,QIU Jing,LI Nan,et al.Experimental Study on Seismic Performance of Trapezoidally Corrugated Steel Plate Shear Walls[J].Journal of Building Structures,2018,39(S2):112-120.
[15]DOU C,JIANG Z Q,PI Y L,et al.Elastic shear Buckling of Sinusoidally Corrugated Steel Plate Shear Wall[J].Engineering Structures,2016,121:136-146.
[16]TONG J Z,GUO Y L.Elastic Buckling Behavior of Steel Trapezoidal Corrugated Shear Walls with Vertical Stiffeners[J].Thin-walled Structures,2015,95:31-39.
[17]TONG J Z,GUO Y L,ZUO J Q.Elastic Buckling and Load-resistant Behaviors of Double-corrugated-plate Shear Walls Under Pure In-plane Shear loads[J].Thin-walled Structures,2018,130:593-612.
[18]姜文伟,金华建,孙飞飞,等.无屈曲波纹钢板剪力墙简化分析模型研究[J].建筑钢结构进展,2019,21(1):61-71.
JIANG Wen-wei,JIN Hua-jian,SUN Fei-fei,et al.Research on Simplified Analysis Models of Non-buckling Corrugated Steel Shear Walls[J].Progress in Steel Building Structures,2019,21(1):61-71.
[19]唐九如.钢筋混凝土框架节点抗震[M].南京:东南大学出版社,1989.
TANG Jiu-ru.Seismic Resistance of Joints in Reinforced Concrete Frames[M].Nanjing:Southeast University Press,1989.

Memo

Memo:
-
Last Update: 2020-07-29