|Table of Contents|

Shear Behavior of Multi-ribbed Composite Shear Walls with RPC Filled Steel Tubular Columns(PDF)

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

Issue:
2020年05期
Page:
142-150
Research Field:
Publishing date:

Info

Title:
Shear Behavior of Multi-ribbed Composite Shear Walls with RPC Filled Steel Tubular Columns
Author(s):
ZHU Qian JIANG Yong-jie YUE Xu-peng ZHAO Jun-hai
School of Civil Engineering, Chang’an University, Xi’an 710061, Shaanxi, China
Keywords:
unified strength theory RPC filled steel tubular column multi-ribbed composite shear wall shear capacity numerical simulation
PACS:
TU398.2
DOI:
10.19815/j.jace.2020.05015
Abstract:
In order to study the shear behavior of a new type of multi-ribbed composite shear walls with reactive powder concrete(RPC)filled steel tubular columns, the shear bearing capacity formulas for such composite walls were established based on both the unified strength theory and the calculation model of oblique compression strut. The intermediate principal stress, tensile-compressive strength difference and shear strength between the fringe frame and equivalent elastic plate were taken into account. Moreover, ABAQUS software was used to conduct horizontal monotonic loading on the composite shear walls with consideration of different RPC strengths, axial compression ratios and steel tubular yield strengths. The numerical simulation results and theoretical calculation results of shear capacity were compared and analyzed. The results show that the numerical simulation results are in better agreement with the theoretical calculated values, which verifies the accuracy of the theoretical method and the reliability of finite element model. Meanwhile, the shear capacity significantly improves with the increase of rib RPC strength. By increasing the axial compression ratio, the shear capacity increases first and then decreases, and ductility performance becomes worse. The shear capacity slightly enhances with increasing the yield strength of frame-column steel tube, however it can improve the ductility of the composite wall. The proposed shear bearing capacity formulas provide a theoretical foundation for the development of this new composite wall.

References:

[1] 钱稼茹,江 枣,纪晓东.高轴压比钢管混凝土剪力墙抗震性能试验研究[J].建筑结构学报,2010,31(7):40-48.
QIAN Jia-ru,JIANG Zao,JI Xiao-dong.Experimental Study on Seismic Behavior of Steel Tube-reinforced Concrete Composite Shear Walls with High Axial Compressive Load Ratio[J].Journal of Building Structures,2010,31(7):40-48.
[2]白 亮,周天华,梁兴文,等.钢管约束高强混凝土剪力墙抗震性能试验研究[J].土木工程学报,2014,47(5):9-17.
BAI Liang,ZHOU Tian-hua,LIANG Xing-wen,et al.Experimental Study on the Seismic Behavior of Steel Tube Confined High-strength Concrete Shear Walls[J].China Civil Engineering Journal,2014,47(5):9-17.
[3]赵作周,贺小岗,杨 光,等.高轴压比下钢管高强混凝土组合剪力墙抗震性能试验研究[J].建筑结构学报,2016,37(9):108-116.
ZHAO Zuo-zhou,HE Xiao-gang,YANG Guang,et al.Experimental Study on Seismic Behavior of High-strength Concrete Filled Steel Tube Composite Shear Walls Under High Axial Compression Ratio[J].Journal of Building Structures,2016,37(9):108-116.
[4]HU H S,NIE J G,FAN J S,et al.Seismic Behavior of CFST-enhanced Steel Plate-reinforced Concrete Shear Walls[J].Journal of Constructional Steel Research,2016,119:176-189.
[5]高丹盈,尤培波,汤寄予,等.钢管混凝土边框钢纤维混凝土剪力墙受剪承载力计算[J].建筑结构学报,2018,39(6):10-20.
GAO Dan-ying,YOU Pei-bo,TANG Ji-yu,et al.Calculation Method for Shear Capacity of Steel Fiber Reinforced Concrete Shear Wall with Concrete Filled Steel Tubular Columns[J].Journal of Building Structures,2018,39(6):10-20.
[6]袁 泉,赵媛媛,宗明奇,等.装配式型钢斜交密肋复合墙抗震性能试验研究[J].建筑结构学报,2019,40(11):122-130.
YUAN Quan,ZHAO Yuan-yuan,ZONG Ming-qi,et al.Experimental Study on Seismic Behavior of Precast Shape Steel Oblique Multi-ribbed Composite Wall[J].Journal of Building Structures,2019,40(11):122-130.
[7]SUN J,JIA Y J,MO Y L.Evaluation of Elastic Properties and Lateral Stiffness of Multi-ribbed Walls Based on Equivalent Elastic Model[J].Engineering Structures,2014,72:92-101.
[8]郭 猛,王双娇,袁 泉,等.框格形式影响组合墙加固框架抗震性能试验[J].建筑科学与工程学报,2017,34(4):65-71.
GUO Meng,WANG Shuang-jiao,YUAN Quan,et al.Seismic Performance Experiment of Frame Strengthened by Composite Walls with Different Grid Forms[J].Journal of Architecture and Civil Engineering,2017,34(4):65-71.
[9]ERDOGDU S,KANDIL U,NAYIR S.Effects of Cement Dosage and Steel Fiber Ratio on the Mechanical Properties of Reactive Powder Concrete[J].Advances in Concrete Construction,2019,8(2):139-144.
[10]陈宝春,韦建刚,苏家战,等.超高性能混凝土应用进展[J].建筑科学与工程学报,2019,36(2):10-20.
CHEN Bao-chun,WEI Jian-gang,SU Jia-zhan,et al.State-of-the-art Progress on Application of Ultra-high Performance Concrete[J].Journal of Architecture and Civil Engineering,2019,36(2):10-20.
[11]朱 倩,赵均海,张常光,等.考虑界面黏结与尺寸效应的钢管活性粉末混凝土短柱轴压承载力统一解[J].工业建筑,2016,46(2):145-151.
ZHU Qian,ZHAO Jun-hai,ZHANG Chang-guang,et al.Unified Solutions of Axial Compression Bearing Capacity for RPC Filled Steel Tubular Stub Columns with Interface Bond and Size Effect[J].Industrial Construction,2016,46(2):145-151.
[12]GUO Z K,CHEN W X,ZHANG Y Y,et al.Post Fire Blast-resistances of RPC-FST Columns Using Improved Grigorian Model[J].International Journal of Impact Engineering,2017,107:80-95.
[13]YU M H.Unified Strength Theory and Its Applications[M].Berlin:Springer Press,2004.
[14]黄 炜,王君媛,张程华,等.基于统一强度理论生态复合墙体受剪极限承载力分析[J].工业建筑,2012,42(8):23-26,17.
HUANG Wei,WANG Jun-yuan,ZHANG Cheng-hua,et al.Ultimate Shear Bearing Capacity Analysis of Eco-composite Wall Based on the Twin Shear Unified Strength Theory[J].Industrial Construction,2012,42(8):23-26,17.
[15]姚谦峰,黄 炜,田 洁,等.密肋复合墙体受力机理及抗震性能试验研究[J].建筑结构学报,2004,25(6):67-74.
YAO Qian-feng,HUANG Wei,TIAN Jie,et al.Experimental Analyses of Mechanical Characteristics and Seismic Performance of Multi-ribbed Panel Wall[J].Journal of Building Structures,2004,25(6):67-74.
[16]张大长,陈怀亮,卢中强.基于抗剪抵抗机构的无开洞RC剪力墙的极限承载力分析模型的探讨[J].工程力学,2007,24(7):134-139,188.
ZHANG Da-chang,CHEN Huai-liang,LU Zhong-qiang.The Investigation on Analysis Models of Ultimate Strength of Reinforced Concrete Shear Wall Based on Shear Resistant Mechanism[J].Engineering Mechanics,2007,24(7):134-139,188.
[17]喻 磊,姚谦峰,陈 平,等.砌体填充框架结构极限承载能力计算的一种新方法[J].工程力学,2007,24(6):117-122.
YU Lei,YAO Qian-feng,CHEN Ping,et al.A New Calculation Method for the Ultimate Load-bearing Capacity of Masonry-infilled Frames[J].Engineering Mechanics,2007,24(6):117-122.
[18]韩林海,杨有福.现代钢管混凝土结构技术[M].2版.北京:中国建筑工业出版社,2007.
HAN Lin-hai,YANG You-fu.Modern Concrete Filled Steel Tube Structural Technology[M].2nd ed.Beijing:China Architecture & Building Press,2007.
[19]王秋维,王 杨,张春尧,等.基于ABAQUS的钢管活性粉末混凝土短柱轴压受力性能研究[J].防灾减灾工程学报,2019,39(3):421-429.
WANG Qiu-wei,WANG Yang,ZHANG Chun-yao,et al.Numerical Simulation Analysis on Mechanical Behavior of Axially Loaded Reactive Powder Concrete Filled Steel Tube Short Columns[J].Journal of Disaster Prevention and Mitigation Engineering,2019,39(3):421-429.
[20]罗 华,季文玉,闫志刚,等.加载方式对钢管活性粉末混凝土短柱抗压性能影响的研究[J].铁道学报,2014,36(9):105-110.
LUO Hua,JI Wen-yu,YAN Zhi-gang,et al.Research on Influence of Loading Methods on Compressive Behavior of Reactive Powder Concrete Filled Steel Tube Stub Columns Under Axial Loads[J].Journal of the China Railway Society,2014,36(9):105-110.
[21]ELLOBODY E,YOUNG B.Nonlinear Analysis of Concrete-filled Steel SHS and RHS Columns[J].Thin-walled Structures,2006,44(8):919-930.
[22]DBJ 43/T 325-2017,活性粉末混凝土结构技术规程[S].
DBJ 43/T 325-2017,Technical Specification for Reactive Powder Concrete Structures[S].
[23]过镇海,时旭东.钢筋混凝土原理和分析[M].北京:清华大学出版社,2003.
GUO Zhen-hai,SHI Xu-dong.Reinforced Concrete Theory and Analyse[M].Beijing:Tsinghua University Press,2003.

Memo

Memo:
-
Last Update: 2020-10-15