|Table of Contents|

Research on Deflection Evaluation Method of Continuous Girder Bridge Based on Environmental Excitation(PDF)

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

Issue:
2021年04期
Page:
73-79
Research Field:
Publishing date:

Info

Title:
Research on Deflection Evaluation Method of Continuous Girder Bridge Based on Environmental Excitation
Author(s):
QI Xing-jun12 SUN Xu-fa12 ZHAO Yue12 LI Hong-yin3 WANG Shan-shan3
(1. School of Transportation Engineering, Shandong Jianzhu University, Jinan 250101, Shandong, China; 2. Shandong Co-innovation Center for Disaster Prevention and Mitigation of Civil Structures, Jinan 250101, Shandong, China; 3. Qilu Transportation Development Group, Jinan 250101, Shandong, China)
Keywords:
static load test modal deflection flexibility matrix mass-normalized modal shape SSI
PACS:
U447
DOI:
10.19815/j.jace.2020.08013
Abstract:
In order to study the feasibility of deflection evaluation method of continuous beam bridge in service based on environmental excitation, the bridge static load test scheme was designed according to the Load Test Methods for Highway Bridge. The stochastic subspace identification(SSI)method was used to measure and identify the modal parameters of the bridge under environmental excitation. Combined with the bridge finite element model, the mass matrix was extracted, the measured modal shapes of the bridge were mass normalized.Then,the measured displacement compliance matrix of the bridge was identified, and the measured modal deflection of the bridge under static load was calculated.Finally, the bearing capacity of the bridge was evaluated according to the code. Taking a 4-span continuous beam bridge as an example, the finite element model of damaged bridge was established. Based on the environmental excitation of finite element numerical simulation, the flexibility matrix and modal deflection of the bridge under test load were predicted, and the calibration coefficient of static load test was calculated by comparing with the theoretical design deflection of the initial nondestructive bridge. The results show that the maximum deflection relative error of each measuring point is less than 6%, which basically meets the engineering precision requirements. According to the code, the bearing capacity of the damaged bridge beam does not meet the design requirements. The method can accurately evaluate the bearing capacity of existing bridges, and the evaluation method of bearing capacity of continuous beam bridges based on environmental excitation is effective and feasible.

References:

[1] 《中国公路学报》编辑部.中国桥梁工程学术研究综述·2014[J].中国公路学报,2014,27(5):1-96.
Editorial Department of China Journal of Highway and Transport.Review on China's Bridge Engineering Research:2014[J].China Journal of Highway Transport,2014,27(5):1-96.
[2]吉伯海,傅中秋.近年国内桥梁倒塌事故原因分析[J].土木工程学报,2010,43(增1):495-498.
JI Bo-hai,FU Zhong-qiu.Analysis of Chinese Bridge Collapse Accident Causes in Recent Years[J].China Civil Engineering Journal,2010,43(S1):495-498.
[3]CATBAS F N,BROWN D L,AKTAN A E.Use of Modal Flexibility for Damage Detection and Condition Assessment:Case Studies and Demonstrations on Large Structures[J].Journal of Structural Engineering,2006,132(11):1699-1712.
[4]CATBAS F N,BROWN D L,AKTAN A E.Parameter Estimation for Multiple-input Multiple-output Modal Analysis of Large Structures[J].Journal of Engineering Mechanics,2004,130(8):921-930.
[5]王宁波,任伟新,何立翔.基于桥梁动力响应的应变影响线提取[J].中南大学学报:自然科学版,2014,45(12):4362-4369.
WANG Ning-bo,REN Wei-xin,HE Li-xiang.Extraction of Strain Influence Line of Bridge from Dynamic Responses[J].Journal of Central South University:Science and Technology,2014,45(12):4362-4369.
[6]WANG N B,HE L X,REN W X,et al.Extraction of Influence Line Through a Fitting Method from Bridge Dynamic Response Induced by a Passing Vehicle[J].Engineering Structures,2017,151:648-664.
[7]TIAN Y D,ZHANG J,XIA Q,et al.Flexibility Identification and Deflection Prediction of a Three-span Concrete Box Girder Bridge Using Impacting Test Data[J].Engineering Structures,2017,146:158-169.
[8]TIAN Y D,ZHANG J,HAN Y X.Structural Scaling Factor Identification from Output-only Data by a Moving Mass Technique[J].Mechanical System and Signal Processing,2019,115:45-49.
[9]ZHANG J,ZHANG Q Q,GUO S L,et al.Structural Identification of Short/Middle Span Bridges by Rapid Impact Testing:Theory and Verification[J].Smart Materials and Structures,2015,24(6):1-12.
[10]张茵涛.在役预应力混凝土梁桥静载试验[J].铁道建筑,2018,58(3):28-30,38.
ZHANG Yin-tao.Static Load Test Study on Prestressed Concrete Girder Bridge in Service[J].Railway Engineering,2018,58(3):28-30,38.
[11]常 军.随机子空间方法在桥梁模态参数识别中的应用研究[D].上海:同济大学,2006.
CHANG Jun.Modal Parameters Identification of Bridge by Stochastic Subspace Identification Method[D].Shanghai:Tongji University,2006.
[12]张笑华.结构环境振动模态参数识别随机子空间方法与应用[D].福州:福州大学,2006.
ZHANG Xiao-hua.Stochastic Subspace Identification and Application of Structures Under Ambient Vibration[D].Fuzhou:Fuzhou University,2006.
[13]陈永高,钟振宇.环境激励下桥梁结构信号分解与模态参数识别[J].振动、测试与诊断,2018,38(6):1267-1274,1300.
CHEN Yong-gao,ZHONG Zhen-yu.Signal Decomposition and Modal Parameter Identification for Bridge Structural Under Environmental Excitation[J].Journal of Vibration,Measurement & Diagnosis,2018,38(6):1267-1274,1300.
[14]周 云,易伟建,蒋运忠,等.多参考点脉冲锤击法识别桥梁模态柔度的实践[J].中国公路学报,2015,28(9):46-56.
ZHOU Yun,YI Wei-jian,JIANG Yun-zhong,et al.Practice of Bridge Modal Flexibility Identification Using Multiple-reference Impact Test[J].China Journal of Highway and Transport,2015,28(9):46-56.
[15]田永丁.基于环境振动的桥梁结构柔度识别与性能评估[D].南京:东南大学,2016.
TIAN Yong-ding.Flexibility Identification and Performance Assessment of Bridge Structures from Ambient Vibration Test Data[D].Nanjing:Southeast University,2016.
[16]林贤坤,覃柏英,张令弥,等.基于附加质量的试验模态振型质量归一化[J].振动、测试与诊断,2012,32(5):784-790,864.
LIN Xian-kun,QIN Bo-ying,ZHANG Ling-mi,et al.Way of Getting Mass-normalized Experimental Mode Shapes Based on Mass Changes[J].Journal of Vibration Measurement & Diagnosis,2012,32(5):784-790,864.
[17]林贤坤,张令弥,郭勤涛,等.基于模态挠度法的预应力连续箱梁桥状态评估[J].土木工程学报,2010,43(10):83-90.
LIN Xian-kun,ZHANG Ling-mi,GUO Qin-tao,et al.Application of Modal Deflection Method Condition Assessment of Prestressed Concrete Continuous Box-girder Bridges[J].China Civil Engineering Journal,2010,43(10):83-90.
[18]宋若雨.基于柔度矩阵的简支梁桥评定及损伤识别方法[D].北京:北京交通大学,2016.
SONG Ruo-yu.Evaluation and Damage Identification Method of Girder Bridge Based on Flexibility Matrix[D].Beijing:Beijing Jiaotong University,2016.
[19]陈 钊.车轮冲击力测量与桥梁性能快速评估[D].南京:东南大学,2017.
CHEN Zhao.Tire Force Measurement and Rapid Bridge Test[D].Nanjing:Southeast University,2017.
[20]汪 莲,王佐才,耿 栋,等.基于应变模态的连续梁动挠度识别[J].工程力学,2017,34(1):130-138.
WANG Lian,WANG Zuo-cai,GENG Dong,et al.Strain Modes Based Dynamic Deflection Estimation of Continuous Beam Structures[J].Engineering Mechanics,2017,34(1):130-138.
[21]GRECO R,VANZ I.New Few Parameters Differential Evolution Algorithm with Application to Structural Identification[J].Journal of Traffic and Transportation Engineering:English Edition,2019,6(1):1-14.

Memo

Memo:
-
Last Update: 2021-07-10