|Table of Contents|

Experimental Study on Seismic Behavior of L-shape Double-side Precast Composite Shear Walls with Constructional Boundary Elements(PDF)

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

Issue:
2021年05期
Page:
47-55
Research Field:
Publishing date:

Info

Title:
Experimental Study on Seismic Behavior of L-shape Double-side Precast Composite Shear Walls with Constructional Boundary Elements
Author(s):
GU Qian1 YU Gang1 TAN Yuan2 ZHAO Duan-feng1 GAO Hong-yuan3
(1.School of Civil Engineering and Architecture, Wuhan University of Technology, Wuhan 430070, Hubei, China; 2. Myhome Prefabricated Building and Technological Co., Ltd., Wuhan 430071, Hubei, China; 3. Changjiang Institute of Survey, Planning, Design and Research Co., Ltd., Wuhan 430010, Hubei, China)
Keywords:
L-shape double-side precast composite shear wall seismic behavior pseudo-dynamic test constructional boundary element
PACS:
TU375
DOI:
10.19815/j.jace.2021.01010
Abstract:
In order to study the seismic behavior of L-shape double-side precast composite shear walls with constructional boundary element in the superimposed slab shear wall structural system, the pseudo-dynamic test on a full-scale L-shape double-side precast shear wall and a cast-in-place shear wall was completed with the axial compressive ratio 0.2. Through comparative analysis, the seismic behavior of the specimens was evaluated. The results show that composite shear wall and cast-in-place shear wall both present typical bending-shear failure characteristics. When the ultimate failure occurs, the concrete in the bottom area of the boundary element in the web of L-shape shear wall is crushed, and the longitudinal reinforcement is yielded or broken. The positive bending capacity of the flange on the composite shear wall under tension is 14.6% lower than that of the cast-in-place shear wall, while the reverse bending capacity of the flange under compression is 9.2% lower than that of the cast-in-place shear wall. The initial stiffness of the precast composite shear wall is lower than that of the cast-in-place wall under positive loading,and the rate of stiffness degradation after yielding is faster. The initial stiffness of the precast composite shear wall and the law of stiffness degradation after yielding under negative loading are basically the same as those of the cast-in-place shear wall. The joint between the L-shape cast-in-place constructional boundary element and composite wall connected with additional steel bar has good force transmission performance. The seismic performance of L-shape double-side composite shear wall is not as good as the cast-in-place wall, it is suggested that the reinforcement ratio of the constructional boundary elements should be increased.

References:

[1] 郭正兴,朱张峰,管东芝.装配整体式混凝土结构研究与应用[M].南京:东南大学出版社,2018.
GUO Zheng-xing,ZHU Zhang-feng,GUAN Dong-zhi.Research and Application of Emulative Precast Concrete Structures[M].Nanjing:Southeast University Press,2018.
[2]PAVESE A,BOUNAS D A.Experimental Assessment of the Seismic Performance of a Prefabricated Concrete Structural Wall System[J].Engineering Structures,2011,33(6):2049-2062.
[3]ALDEMIR A,BINICI B,CANBAY E.Cyclic Testing of Reinforced Concrete Double Walls[J].ACI Structural Journal,2017,114(2):395-406.
[4]叶献国,张丽军,王德才,等.预制叠合板式混凝土剪力墙水平承载力试验研究[J].合肥工业大学学报:自然科学版,2009,32(8):1215-1218.
YE Xian-guo,ZHANG Li-jun,WANG De-cai,et al.Experimental Study on Horizontal Carrying Capacity of Superimposed Slab Shear Walls[J].Journal of Hefei University of Technology:Natural Science,2009,32(8):1215-1218.
[5]王滋军,李向民,王 宇,等.带有约束边缘构件的预制叠合剪力墙抗震性能试验研究[J].中南大学学报:自然科学版,2016,47(8):2759-2767.
WANG Zi-jun,LI Xiang-min,WANG Yu,et al.Experimental Study on Seismic Behavior of Reinforced Concrete Composite Shear Wall with Confined Boundary Member[J].Journal of Central South University:Science and Technology,2016,47(8):2759-2767.
[6]薛伟辰,李 亚,蔡 磊,等.双面叠合混凝土剪力墙平面内和平面外抗震性能研究[J].工程力学,2018,35(5):47-53,142.
XUE Wei-chen,LI Ya,CAI Lei,et al.In-plane and Out-of-plane Mechanical Behavior of Double Faced Superposed Concrete Shear Walls[J].Engineering Mechanics,2018,35(5):47-53,142.
[7]沈 林.T形叠合板式剪力墙结构抗震性能试验研究[D].合肥:安徽建筑工业学院,2010.
SHEN Lin.Experimental Study on Seismic Performance of T Type Superimposed Wall Plane[D].Hefei:Anhui Institute of Architecture & Industry,2010.
[8]KARAMLOU A,KABIR M Z.Experimental Study of L-shaped Slender R-ICF Shear Walls Under Cyclic Lateral Loading[J].Engineering Structures,2012,36(3):134-146.
[9]秦士洪,范世杰,张 瀑,等.竖向拼缝L形剪力墙抗震性能试验[J].重庆大学学报,2019,42(1):36-47.
QIN Shi-hong,FAN Shi-jie,ZHANG Pu,et al.Experimental Study on Seismic Behavior of L-shaped Shear Wall with Vertical Joints[J].Journal of Chongqing University,2019,42(1):36-47.
[10]张伟林,沈小璞,吴志新,等.叠合板式剪力墙T型、L型墙体抗震性能试验研究[J].工程力学,2012,29(6):196-201.
ZHANG Wei-lin,SHEN Xiao-pu,WU Zhi-xin,et al.Experimental Study of Seismic Performance on T and L Types Superimposed-slab-shear-walls Structure[J].Engineering Mechanics,2012,29(6):196-201.
[11]孙训方,方孝淑,关来泰,等.材料力学[M].北京:高等教育出版社,2009.
SUN Xun-fang,FANG Xiao-shu,GUAN Lai-tai,et al.Mechanics of Materials[M].Beijing:Higher Education Press,2009.
[12]SANADA Y,YAMAMOTO N,ICHINOSE T,et al.Flexure Mechanism and Deformation at Bending-compression Failure of RC Structural Walls[J].Journal of Structural Engineering,2018,144(2):04017204.
[13]张云峰.预制叠合板式混凝土剪力墙纵筋连接及其抗震性能研究[D].哈尔滨:哈尔滨工业大学,2017.
ZHANG Yun-feng.Study on Longitudinal Steel Bar Connection of Precast Superimposed Concrete Shear Wall and Its Seismic Behavior[D].Harbin:Harbin Institute of Technology,2017.

Memo

Memo:
-
Last Update: 2021-09-01