|Table of Contents|

Axial compressive performance of steel reinforced ultra-high performance concrete filled square stainless steel tube(PDF)

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

Issue:
2023年05期
Page:
78-88
Research Field:
建筑结构
Publishing date:

Info

Title:
Axial compressive performance of steel reinforced ultra-high performance concrete filled square stainless steel tube
Author(s):
CHENG Zhan LI Junhua LIU Zidan DU Guofeng
(School of Urban Construction,Yangtze University, Jingzhou 434023, Hubei, China)
Keywords:
square stainless steel tube UHPC axial compression test bearing capacity numerical simulation
PACS:
TU398.9
DOI:
10.19815/j.jace.2022.02071
Abstract:
In order to study the axial compressive performance of steel reinforced ultra-high performance concrete filled square stainless steel tube(SR-UHPCFSSST), six members were designed with the parameters of diameter-to-thickness ratio and steel section area, and axial compression test and numerical simulation calculation were performed to obtain the failure form, ultimate bearing capacity and load-displacement curve of members. Using finite element analysis method to expand the parameters, the effects of changes in aspect ratio and concrete strength on the failure process, ultimate bearing capacity and ductility of the members were studied. Based on the test and numerical simulation results, the calculation formula of SR-UHPCFSSST was put forward. The results show that the failure characteristics of all members are similar, and there is local waveform drum in the middle, but there is also drum at the end of the member containing steel bone. Different materials in the members have different effects on the ultimate bearing capacity and ductility. The ultimate bearing capacity increases with the increase of steel section area and concrete strength, and decreases with the increase of diameter-to-thickness ratio and aspect ratio, but the influence of diameter-to-thickness ratio and concrete strength on the ultimate bearing capacity of the members is more obvious. The existence of steel bone significantly improves the ductility of the member, and the ductility of the member also increases with the increase of the steel section area, while the increase of concrete strength will reduce the ductility of the member. The calculation results are in good agreement with the test results.

References:

[1] 王文达,李鲜珺,范家浩.内置型钢钢管混凝土轴压构件设计方法研究及可靠度分析[J].建筑科学与工程学报,2020,37(6):11-20.
WANG Wenda,LI Xianjun,FAN Jiahao.Design method research and reliability analysis of concrete-filled steel tubular columns with inner steel under axial compression[J].Journal of Architecture and Civil Engineering,2020,37(6):11-20.
[2]张文福,李 洋,邓 云,等.内置工字钢骨方钢管混凝土自由扭转刚度计算与FEM验证[J].东北石油大学学报,2018,42(3):113-122,130.
ZHANG Wenfu,LI Yang,DENG Yun,et al.Free torsional rigidity and its FEM verification of concrete-filled square steel tube with encased I-shaped steel[J].Journal of Northeast Petroleum University,2018,42(3):113-122,130.
[3]DU Y S,CHEN Z H,ZHANG C Q,et al.Research on axial bearing capacity of rectangular concrete-filled steel tubular columns based on artificial neural networks[J].Frontiers of Computer Science,2017,11(5):863-873.
[4]LU Y Y,LI N,LI S,et al.Experimental investigation of axially loaded steel fiber reinforced high strength concrete-filled steel tube columns[J].Journal of Central South University,2015,22(6):2287-2296.
[5]TAN Q H,GARDNER L,HAN L H,et al.Fire performance of steel reinforced concrete-filled stainless steel tubular(CFSST)columns with square cross-sections[J].Thin-walled Structures,2019,143:106197.
[6]李永进,廖飞宇,黄海清.矩形不锈钢管混凝土柱双向偏压力学性能试验研究[J].建筑钢结构进展,2018,20(2):60-66.
LI Yongjin,LIAO Feiyu,HUANG Haiqing.Experimental study on the behavior of concrete filled rectangular stainless steel tubular columns under bi-axial eccentric compression[J].Progress in Steel Building Structures,2018,20(2):60-66.
[7]韩林海,尧国皇,杨 华.钢管被动约束下混凝土的本构关系模型[DB/OL].(2011-11-01)[2021-11-26].https://kns.cnki.net/kcms2/article/abstract?v=kx aUMs6x7-4p_H5157itHVzbzj735XtTfF_z5peEpU-qurQdDmPu6B2oEdpu9xZP6CThtBuTZJse01MmEzI QTjg6Q9FvvOtt&uniplatform=NZKPT.
HAN Linhai,YAO Guohuang,YANG Hua.Constitutive model of concrete under passive restraint of steel tube[DB/OL].(2011-11-01)[2021-11-26].https://kns.cnki.net/kcms2/article/abstract?v=kxaUMs6x 7-4p_H5157itHVzbzj735XtTfF_z5peEpU-qurQdDmPu6B2oEdpu9xZP6CThtBuTZJse01MmEzIQTjg6Q9F vvOtt&uniplatform=NZKPT.
[8]金 浏,樊玲玲,杜修力,等.圆钢管混凝土柱轴压破坏行为与尺寸效应理论研究[J].中国科学:技术科学,2020,50(2):209-220.
JIN Liu,FAN Lingling,DU Xiuli,et al.Failure behavior and size effect theory of circular concrete-filled steel tubular columns under axial compression[J].Scientia Sinica(Technologica),2020,50(2):209-220.
[9]LE T T,ASTERIS P G,LEMONIS M E.Prediction of axial load capacity of rectangular concrete-filled steel tube columns using machine learning techniques[J].Engineering with Computers,2022,38(S4):3283-3316.
[10]YOO D Y,SHIN H O,YANG J M,et al.Material and bond properties of ultra high performance fiber reinforced concrete with micro steel fibers[J].Composites Part B:Engineering,2014,58:122-133.
[11]WILLE K,KIM D J,NAAMAN A E.Strain-hardening UHP-FRC with low fiber contents[J].Materials and Structures,2011,44(3):583-598.
[12]WANG W Q,WU C Q,LIU Z X.Compressive behavior of hybrid double-skin tubular columns with ultra-high performance fiber-reinforced concrete(UHPFRC)[J].Engineering Structures,2019,180:419-441.
[13]邓宗才,王义超.FRP约束超高性能混凝土圆柱轴压本构模型[J].西南交通大学学报,2015,50(4):641-647.
DENG Zongcai,WANG Yichao.Axial compression stress-strain model for UHPC cylinders confined by FRP[J].Journal of Southwest Jiaotong University,2015,50(4):641-647.
[14]GULER S,YAVUZ D,AYDN M.Hybrid fiber reinforced concrete-filled square stub columns under axial compression[J].Engineering Structures,2019,198:109504.
[15]ZHANG J C,YANG J.Study on mechanism of L-shaped concrete-filled steel tubular columns subjected to axial compression[J].Advanced Materials Research,2012,476-478:2463-2468.
[16]DABAON M A,EL-BOGHDADI M H,HASSANEIN M F.Experimental investigation on concrete-filled stainless steel stiffened tubular stub columns[J].Engineering Structures,2009,31(2):300-307.
[17]郑永乾,赖鹏松,何春霞.方形复合不锈钢管混凝土柱滞回性能研究[J].土木工程学报,2019,52(12):36-45,56.
ZHENG Yongqian,LAI Pengsong,HE Chunxia.Hysteretic behavior of square composite-sectional concrete-filled stainless steel tubular columns[J].China Civil Engineering Journal,2019,52(12):36-45,56.
[18]唐红元,李政周,范璐瑶,等.矩形不锈钢管混凝土短柱轴压性能试验研究[J].西南交通大学学报,2022,57(4):855-864.
TANG Hongyuan,LI Zhengzhou,FAN Luyao,et al.Experimental investigation on behavior of rectangular concrete-filled stainless steel tubular stub columns under axial loading[J].Journal of Southwest Jiaotong University,2022,57(4):855-864.
[19]SKALOMENOS K A,HAYASHI K,NISHI R,et al.Experimental behavior of concrete-filled steel tube columns using ultrahigh-strength steel[J].Journal of Structural Engineering,2016,142(9):04016057.
[20]杜国锋,宋 鑫,余思平.内置钢骨组合L形截面钢管混凝土短柱轴压性能试验研究[J].建筑结构学报,2013,34(8):82-89.
DU Guofeng,SONG Xin,YU Siping.Experimental research on axially loaded composite L-section steel tubular short columns filled with steel-reinforced concrete[J].Journal of Building Structures,2013,34(8):82-89.
[21]刘 坚,张鹏程,刘长江,等.内配型钢的方钢管再生混凝土短柱轴压承载力分析[J].混凝土,2021(10):1-5.
LIU Jian,ZHANG Pengcheng,LIU Changjiang,et al.Axial bearing capacity analysis of RAC-filled square steel tubular stub columns with encased profiled steel under axial compression[J].Concrete,2021(10):1-5.
[22]TIAN H W,ZHOU Z,ZHANG Y,et al.Axial behavior of reinforced concrete column with ultra-high performance concrete stay-in-place formwork[J].Engineering Structures,2020,210(7):110403.
[23]PATEL V I,HASSANEIN M F,THAI H T,et al.Behaviour of axially loaded circular concrete-filled bimetallic stainless-carbon steel tubular short columns[J].Engineering Structures,2017,147:583-597.
[24]金属材料拉伸试验 第1部分:室温试验方法:GB/T 228.1—2010 [S].北京:中国标准出版社,2012.
Metallic materials — tensile testing — part 1:method of test at room temperature:GB/T 228.1—2010[S].Beijing:Standards Press of China,2012.
[25]PATEL V I,LIANG Q Q,HADI M N S.Nonlinear analysis of axially loaded circular concrete-filled stainless steel tubular short columns[J].Journal of Constructional Steel Research,2014,101:9-18.
[26]MANDER J B,PRIESTLEY M J N,PARK R.Theoretical stress-strain model for confined concrete[J].Journal of Structural Engineering,1988,114(8):1804-1826.
[27]LIM J C,OZBAKKALOGLU T.Stress-strain model for normal- and light-weight concretes under uniaxial and triaxial compression[J].Construction and Building Materials,2014,71(7):492-509.
[28]GRAYBEAL B A.Compressive behavior of ultra-high-performance fiber-reinforced concrete[J].ACI Materials Journal,2007,104(2):146-152.
[29]LIANG Q Q.Performance-based analysis of concrete-filled steel tubular beam-columns,part I:theory and algorithms[J].Journal of Constructional Steel Research,2009,65(2):363-372.
[30]HU H T,HUANG C S,WU M H,et al.Nonlinear analysis of axially loaded concrete-filled tube columns with confinement effect[J].Journal of Structural Engineering,2003,129(10):1322-1329.
[31]Eurocode 3 — design of steel structures — part 1-4:general rules — supplementary rules for stainless steels:EN 1993-1-4[S].Brussels:CEN,1993.
[32]HUANG W,FAN Z C,SHEN P L,et al.Experimental and numerical study on the compressive behavior of micro-expansive ultra-high-performance concrete-filled steel tube columns[J].Construction and Building Materials,2020,254:119150.
[33]钢管混凝土结构技术规范:GB 50936—2014 [S].北京:中国建筑工业出版社,2014.
Technical code for concrete filled steel tubular structures:GB 50936—2014 [S].Beijing:China Architecture & Building Press,2014.

Memo

Memo:
-
Last Update: 2023-09-01