|Table of Contents|

Experimental study on axial compression performance of concrete short columns with hollow sandwich steel jacketed aluminum tubes(PDF)

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

Issue:
2023年06期
Page:
35-44
Research Field:
建筑结构
Publishing date:

Info

Title:
Experimental study on axial compression performance of concrete short columns with hollow sandwich steel jacketed aluminum tubes
Author(s):
LI Bing TIAN Liming ZHOU Bo
(School of Civil Engineering, Shenyang Jianzhu University, Shenyang 110168, Liaoning, China)
Keywords:
composite structure hollow sandwich steel jacketed aluminum tube concrete short column axial compression test load capacity calculation
PACS:
TU312
DOI:
10.19815/j.jace.2021.12082
Abstract:
In order to study the axial compression performance of concrete short columns with hollow sandwich steel jacketed aluminum tubes, an axial compression test on eight members by varying the parameters was carried out. The axial compression test was conducted on components with hollow ratios of 0.38, 0.51, 0.78, concrete strength of ordinary concrete C30 and lightweight concrete C30, and inner aluminum alloy tube thickness of 5 mm and 3 mm. Based on the axial compression load capacity formula of the concrete short column of hollow sandwich steel tube, the restraint effect coefficient in the formula was modified, and finally a better fitting formula for the calculation of the axial compression load capacity of the concrete short column with hollow sandwich steel jacketed aluminum tube was derived. The results show that the failure mode of the component is bulging at the middle or end of the span, with the outer steel pipe bulging outward, the core concrete being crushed, and the inner aluminum alloy tube sinking inward. The ultimate load capacity of the members with hollow ratio of 0.78 and 0.51 is increased by 29% and 19% respectively compared with the members with hollow ratio of 0.38, and the ultimate load capacity of ordinary concrete members is increased by 60% compared with that of lightweight concrete members. The load capacity of members with inner pipe wall thickness of 5 mm is increased by about 2% compared with that of members with inner pipe wall thickness of 3 mm. The load bearing capacity of the member increases with the decrease of the hollow ratio, the increase of the concrete strength grade and the increase of the inner aluminum alloy tube thickness.

References:

[1] 陶 忠,韩林海,黄 宏.圆中空夹层钢管混凝土柱力学性能研究[J].土木工程学报,2004,37(10):41-51.
TAO Zhong,HAN Linhai,HUANG Hong.Mechanical behaviour of concrete-filled double skin steel tubular columns with circular sections[J].China Civil Engineering Journal,2004,37(10):41-51.
[2]UENAKA K,KITOH H,SONODA K.Concrete filled double skin circular stub columns under compression[J].Thin-walled Structures,2010,48(1):19-24.
[3]WAN C Y,ZHA X X,DASSEKPO J B M.Analysis of axially loaded concrete filled circular hollow double steel tubular columns exposed to fire[J].Fire Safety Journal,2017,88:1-12.
[4]LIANG W,DONG J F,WANG Q Y.Mechanical behaviour of concrete-filled double-skin steel tube(CFDST)with stiffeners under axial and eccentric loading[J].Thin-walled Structures,2019,138:215-230.
[5]钱稼茹,张 扬,纪晓东,等.复合钢管高强混凝土短柱轴心受压性能试验与分析[J].建筑结构学报,2011,32(12):162-169.
QIAN Jiaru,ZHANG Yang,JI Xiaodong,et al. Test and analysis of axial compressive behavior of short composite-sectioned high strength concrete filled steel tubular columns[J].Journal of Building Structures,2011,32(12):162-169.
[6]王志滨,郭俊涛,高扬虹,等.中空夹层薄壁钢管混凝土短柱轴压性能研究[J].建筑钢结构进展,2018,20(2):53-59.
WANG Zhibin,GUO Juntao,GAO Yanghong,et al.Study on the behavior of concrete-filled double-skin thin-walled steel tubular stub columns under axial compression[J].Progress in Steel Building Structures,2018,20(2):53-59.
[7]方 旭.圆中空夹层钢管超高性能混凝土柱轴压力学性能研究[D].南昌:华东交通大学,2020.
FANG Xu.Study on the axial compression behavior of UHPC columns with circular hollow sandwich steel tubes[D].Nanchang:East China Jiaotong University,2020.
[8]郭小农,宗绍晗,成张佳宁,等.铝合金结构耐腐蚀性能研究现状简述[J].建筑钢结构进展,2021,23(6):1-12,60.
GUO Xiaonong,ZONG Shaohan,CHENG Zhangjia-ning,et al.State-of-the-art of the research on corrosion resistance of aluminum alloy structures[J].Progress in Steel Building Structures,2021,23(6):1-12,60.
[9]徐剑佩,吴 将,郭 勇,等.高强铝合金结构在输变电工程中的应用与发展研究[J].宁波大学学报(理工版),2021,34(5):67-73.
XU Jianpei,WU Jiang,GUO Yong,et al.Application and development of high strength aluminum alloy structure in power transmission and transformation engineering[J].Journal of Ningbo University(NESS),2021,34(5):67-73.
[10]ZHOU F,YOUNG B.Concrete-filled aluminum circular hollow section column tests[J].Thin-walled Structures,2009,47(11):1272-1280.
[11]YUAN H X,WANG Y Q,CHANG T,et al.Local buckling and postbuckling strength of extruded aluminium alloy stub columns with slender I-sections[J].Thin-walled Structures,2015,90:140-149.
[12]黄 宏,左 勇,陈梦成,等.大空心率方中空夹层钢管超高性能混凝土短柱轴压力学性能研究[J].实验力学,2021,36(4):543-552.
HUANG Hong,ZUO Yong,CHEN Mengcheng,et al.Research on mechanical properties of large hollow ultra-high performance concrete filled double skin square steel tubes short column under axial loading[J].Journal of Experimental Mechanics,2021,36(4):543-552.
[13]王灿灿,梁旭东,朱培红,等.圆形高强中空夹层钢管混凝土构件轴压性能试验研究[J].西安建筑科技大学学报(自然科学版),2021,53(3):366-378.
WANG Cancan,LIANG Xudong,ZHU Peihong,et al.Study on the axial compression behavior of circular high strength concrete-filled double skin steel tubular members[J].Journal of Xi'an University of Architecture and Technology(Natural Science Edition),2021,53(3):366-378.
[14]罗 靓,程博汉,吕 辉.圆钢管混凝土组合框架拟动力性能有限元分析[J].地震工程与工程振动,2021,41(3):124-135.
LUO Liang,CHENG Bohan,LU Hui.Finite element analysis for quasi dynamic behavior of concrete filled circular steel tubular composite space frame[J].Earthquake Engineering and Engineering Dynamics,2021,41(3):124-135.
[15]陈德劲,查晓雄,侯宪安,等.钢管混凝土X形交叉柱轴压性能研究[J].建筑结构学报,2021,42(增1):351-360.
CHEN Dejing,ZHA Xiaoxiong,HOU Xian'an,et al.Compression behavior of the concrete-filled steel tubular X-column[J].Journal of Building Structures,2021,42(S1):351-360.
[16]秦 鹏,周 昱,李开琼,等.CFRP约束圆钢管高强混凝土短柱轴压试验研究[J].湖南大学学报(自然科学版),2021,48(5):47-54.
QIN Peng,ZHOU Yu,LI Kaiqiong,et al.Experimental study on axial compression behavior of CFRP-high strength concrete filled circular steel tube short columns[J].Journal of Hunan University(Natural Sciences),2021,48(5):47-54.
[17]陈全有,李吉人,王庆利.方套方中空夹层钢管混凝土压扭力学性能试验研究[J].建筑科学,2021,37(5):99-107.
CHEN Quanyou,LI Jiren,WANG Qingli.Experimental study on compression-torsion mechanical properties of concrete filled double skin steel tubes columns with square set square sections[J].Building Science,2021,37(5):99-107.
[18]钟善桐.钢管混凝土结构[M].3版.北京:清华大学出版社,2003.
ZHONG Shantong.The concrete-filled steel tubular structures[M].3rd ed.Beijing:Tsinghua University Press,2003.
[19]蔡绍怀.现代钢管混凝土结构[M].北京:人民交通出版社,2003.
CAI Shaohuai.Modern steel tube concrete structures[M].Beijing:China Communications Press,2003.
[20]韩林海.钢管混凝土结构:理论与实践[M].北京:科学出版社,2004.
HAN Linhai.Concrete-filled steel tubular structure:theory and practice[M].Beijing:Science Press,2004.
[21]任庆新,魏秋宇,丁纪楠.圆中空钢管混凝土叠合构件纯弯性能研究[J].沈阳建筑大学学报(自然科学版),2021,37(3):437-444.
REN Qingxin,WEI Qiuyu,DING Jinan.Study on circle hollow concrete-encased CFST members subject to pure bending[J].Journal of Shenyang Jianzhu University(Natural Science),2021,37(3):437-444.
[22]李晓丽,陈 莉.高强方钢管-混凝土-圆钢管组合短柱轴压性能[J].东北石油大学学报,2021,45(1):112-122.
LI Xiaoli,CHEN Li.Axial compression behavior of high-strength square-steel-tube-concrete-circular-steel-tube combination short column[J].Journal of Northeast Petroleum University,2021,45(1):112-122.
[23]闫维明,孔令旭,慈俊昌,等.大径宽比钢管混凝土叠合柱轴压试验[J].建筑科学与工程学报,2020,37(6):21-28.
YAN Weiming,KONG Lingxu,CI Junchang,et al.Experiment on axial compression of concrete filled steel tube composite columns with large diameter width ratio[J].Journal of Architecture and Civil Engineering,2020,37(6):21-28.
[24]金属材料 拉伸试验 第1部分:室温试验方法:GB/T 228.1—2010[S].北京:中国标准出版社,2010.
Metallic materials — tensile testing — part 1:method of test at room temperature:GB/T 228.1—2010[S].Beijing:Standards Press of China,2010.
[25]普通混凝土配合比设计规程:JGJ 55—2011[M].北京:中国建筑工业出版社,2011.
Specification for mix proportion design of ordinary concrete:JGJ 55—2011[S].Beijing:China Architecture & Building Press,2011.
[26]普通混凝土力学性能试验方法标准:GB/T 50081—2002[S].北京:中国建筑工业出版社,2003.
Standard for test method of mechanical properties on ordinary concrete:GB/T 50081—2002[S].Beijing:China Architecture & Building Press,2003.
[27]黄 宏.中空夹层钢管混凝土压弯构件的力学性能研究[D].福州:福州大学,2006.
HUANG Hong.Behavior of concrete filled double-skin steel tubular beam-columns[D].Fuzhou:Fuzhou University,2006.
[28]赵均海,魏 锦.中空夹层钢管混凝土柱极限承载力研究[J].中国科技论文在线,2007,2(9):688-692.
ZHAO Junhai,WEI Jin.Analysis of ultimate bearing of concrete filled double skin steel tubular columns[J].Sciencepaper Online,2007,2(9):688-692.
[29]聂建国,廖彦波.双圆夹层钢管混凝土柱轴压承载力计算[J].清华大学学报(自然科学版),2008,48(3):312-315.
NIE Jianguo,LIAO Yanbo.Bearing capacity calculations for concrete filled double skin tubes[J].Journal of Tsinghua University(Science and Technology),2008,48(3):312-315.

Memo

Memo:
-
Last Update: 2023-12-01