|Table of Contents|

Refinement finite element analysis of vierendeel sandwich plates based on superelement method(PDF)

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

Issue:
2024年06期
Page:
61-69
Research Field:
建筑结构
Publishing date:

Info

Title:
Refinement finite element analysis of vierendeel sandwich plates based on superelement method
Author(s):
SHENG Xia1; 2;  XIAO Jianchun1; 2;  CHEN Shunyun1; 2;  MA Kejian1; 2
(1. Research Center of Space Structures, Guizhou University, Guiyang 550025, Guizhou, China; 2. Key Laboratory of Structural Engineering of Guizhou Province, Guizhou University, Guiyang 550025, Guizhou, China)
Keywords:
superelement;  vierendeel sandwich plate;  boundary degree of freedom;  substructure;  node;  refinement finite element analysis
PACS:
TU375.2
DOI:
10.19815/j.jace.2023.03003
Abstract:
Aiming at the problem of large total degree of freedom of the calculation model and low computational efficiency in the refinement finite element analysis of the vierendeel sandwich plate, based on the structural characteristics of vierendeel sandwich plates, it was divided into several identical basic grids. Any grid was treated as a substructure and condensed into a superelement, and then the number of boundary degrees of freedom of the superelement was controlled. Based on the superelement, a new computational model was extended to reduce the total number of degrees of freedom in the finite element model of the vierendeel sandwich plate, thereby improving computational efficiency. A fine finite element model of a concrete vierendeel sandwich plate with a plane size of 16 m×16 m was established with different superelements and 0.1 m solid elements, and the static and dynamic analysis was performed. The results show that the parameters of vierendeel sandwich plates extracted by superelement method are less limited, and the structural parameters can be extracted quickly to complete the calculation. The smaller the number of superlement boundary nodes, the higher the computational efficiency, but the error increases accordingly. When the number of nodes of superelement is reduced by about 89% compared with the fine finite element and placed reasonably, the maximum relative error of calculation does not exceed 6% and the calculation time can be saved by 11% to 24%, and the image consistency of modal and time history analysis is better. The refinement finite element analysis of vierendeel sandwich plates based on superelement method is suitable for the parameter analysis and calculation of the elastic stage of vierendeel sandwich plate structure.

References:

[1] 马克俭,张华刚,肖建春,等.钢筋混凝土空间网格结构[J].建筑结构学报,2008,29(增1):239-245.
MA Kejian,ZHANG Huagang,XIAO Jianchun,et al.Reinforced concrete spatial grid structures[J].Journal of Building Structures,2008,29(S1):239-245.
[2]马克俭,张华刚,郑 涛.新型建筑空间网格结构理论与实践[M].北京:人民交通出版社,2006.
MA Kejian,ZHANG Huagang,ZHENG Tao.Theory and practice of new type architectural space griding structures[M].Beijing:China Communications Press,2006.
[3]张华刚,胡 岚,马克俭,等.空腹夹层板的静力性能分析及其实用计算方法[J].贵州工业大学学报(自然科学版),2006,35(3):82-87.
ZHANG Huagang,HU Lan,MA Kejian,et al.Analysis on static behavior of open-web sandwich plate and a practical method[J].Journal of Guizhou University of Technology(Natural Science Edition),2006,35(3):82-87.
[4]钢筋混凝土空间网格结构空腹夹层板楼盖技术规程:DB23/T 1539—2014[S].哈尔滨:黑龙江省住房和城乡建设厅,2014.
Technical specification for reinforced concrete space griding structure with open-web sandwich plate:DB23/T 1539—2014[S].Harbin:Department of Housing and Urban-rural Development of Heilongjiang Province,2014.
[5]钢筋混凝土空腹夹层板楼盖结构技术规程:DB22/48—2005[S].贵阳:贵州省建设厅,2005.
Technical specification for reinforced concrete open-web sandwich plate structures:DB22/48—2005[S].Guiyang:Guizhou Provincial Department of Construction,2005.
[6]韦东阳,肖建春,刘卓群,等.钢-混凝土组合空腹夹层板几种有限元模型的对比研究[J].贵州大学学报(自然科学版),2017,34(4):70-76.
WEI Dongyang,XIAO Jianchun,LIU Zhuoqun,et al.Comparative study of several finite element models of the steel concrete composite hollow sandwich plate[J].Journal of Guizhou University(Natural Sciences),2017,34(4):70-76.
[7]黄 勇,马克俭.基于板-块体模型的空腹夹层板有限元分析[J].贵州工业大学学报(自然科学版),2002,31(6):10-14.
HUANG Yong,MA Kejian.Finite element analysis of plate-block model for open-web sandwich plate[J].Journal of Guizhou University of Technology(Natural Science Edition),2002,31(6):10-14.
[8]陈 波,黄 勇,马克俭.空腹夹层板有限元分析的两种模型[J].建筑结构,2001,31(4):58-60.
CHEN Bo,HUANG Yong,MA Kejian.Two models of finite element analysis for open-web sandwich plate[J].Building Structure,2001,31(4):58-60.
[9]陈 强,肖建春,马克俭,等.剪力键节点域对钢空腹夹层板静力特征的影响分析[J].广西大学学报(自然科学版),2018,43(1):41-49.
CHEN Qiang,XIAO Jianchun,MA Kejian,et al.Effects of shear connector joints on static behavior in steel open-web sandwich plates[J].Journal of Guang-xi University(Natural Science Edition),2018,43(1):41-49.
[10]姚 玲,张华刚,何 奇,等.混凝土空腹夹层板静力性能的有限元参数分析[J].空间结构,2017,23(1):43-53.
YAO Ling,ZHANG Huagang,HE Qi,et al.Parametric finite element analysis on static behavior of concrete open-web sandwich plate[J].Spatial Structures,2017,23(1):43-53.
[11]姚 玲.混凝土空腹夹层板力学性能及承载力设计研究[D].贵阳:贵州大学,2017.
YAO Ling.Study on mechanical properties and bearing capacity design of concrete vierendeel sandwich plate[D].Guiyang:Guizhou University,2017.
[12]BELYI M V.Superelement method for transient dynamic analysis of structural systems[J].International Journal for Numerical Methods in Engineering,1993,36(13):2263-2286.
[13]李 昂,刘初升.基于超单元技术的大型复杂结构的拓扑优化设计[J].中国机械工程,2017,28(20):2467-2474.
LI Ang,LIU Chusheng.Topology optimization designs of large and complex structures based on super element technique[J].China Mechanical Engineering,2017,28(20):2467-2474.
[14]杜大华,贺尔铭,李 锋.基于多重动态子结构法的大型复杂结构动力分析技术[J].推进技术,2018,39(8):1849-1855.
DU Dahua,HE Erming,LI Feng.Dynamics analysis technology of large-scale complex structures based on multilevel dynamic substructure method[J].Journal of Propulsion Technology,2018,39(8):1849-1855.
[15]聂文伟,曹芝腑,姜 东,等.基于重复子结构的缝合式夹芯板动态特性计算[J].复合材料学报,2020,37(2):482-491.
NIE Wenwei,CAO Zhifu,JIANG Dong,et al.Vibration performance analyzing of stitched sandwich panel based on repetitive substructure[J].Acta Materiae Compositae Sinica,2020,37(2):482-491.
[16]宋晓东,颜永逸,李佳靖,等.基于子结构的大型桥梁有限元模型修正方法[J].桥梁建设,2021,51(2):40-46.
SONG Xiaodong,YAN Yongyi,LI Jiajing,et al.Substructure-based finite element model updating of long-span bridge[J].Bridge Construction,2021,51(2):40-46.
[17]周 润.海上风机基础结构超单元计算方法研究[D].大连:大连理工大学,2019.
ZHOU Run.Research of calculation methods for the super element of offshore wind turbine substructure[D].Dalian:Dalian University of Technology,2019.
[18]孙伟男.基于超单元的分扭齿轮箱有限元建模及其修正方法研究[D].南京:南京航空航天大学,2020.
SUN Weinan.Research on finite element modeling and modification method of split-torque gearbox based on super-element[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2020.
[19]姜 东,徐 宇,曹 鑫,等.行星轮系动态特性分析的重复超单元方法[J].机械设计与制造,2020(7):67-70,74.
JIANG Dong,XU Yu,CAO Xin,et al.Repetitive super-element method of dynamic analysis of planetary gear system[J].Machinery Design & Manufacture,2020(7):67-70,74.
[20]GOULD N I M,SCOTT J A.A numerical evaluation of HSL packages for the direct solution of large sparse,symmetric linear systems of equations[J].ACM Transactions on Mathematical Software,2004,30(3):300-325.
[21]SCHENK O,GARTNER K,FICHTNER W,et al.PARDISO:a high-performance serial and parallel sparse linear solver in semiconductor device simulation[J].Future Generation Computer Systems,2001,18(1):69-78.

Memo

Memo:
-
Last Update: 2024-12-10