|Table of Contents|

Monotonic Tensile Test of Spliced 8.8-grade Jointed Bolts(PDF)

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

Issue:
2020年04期
Page:
69-77
Research Field:
Publishing date:

Info

Title:
Monotonic Tensile Test of Spliced 8.8-grade Jointed Bolts
Author(s):
YANG Ou PENG Zhao-jun LIU Yan-zhi KANG Li-jing
(College of Civil Engineering, Hunan University, Changsha 410082, Hunan, China)
Keywords:
8.8-grade bolt jointed bolt steel thread sleeve tensile test
PACS:
TU398
DOI:
10.19815/j.jace.2019.07021
Abstract:
In order to study the tensile behavior of the spliced anchor bolt by connecting two 8.8 grade bolts with steel thread sleeve, tensile tests were carried out on 12 groups of 36 grade 8.8 spliced anchor bolt specimens to determine the connection length of bolt and steel thread sleeve with different diameters, and then determine the length of steel thread sleeve with different diameter anchor bolts. In order to determine the influence of sleeve connection, tensile tests were carried out on 12 grade 8.8 bolts in 4 groups, and the results were compared with the test results of spliced anchor bolts. The results show that when the bolts diameter d=16 mm, and the connection length between the two screws and the steel thread sleeve is 0.75d(screwed into sleeves 7 buckles), the failure of the specimens is that the bolts are pulled out from the steel thread sleeve, and the rest of the spliced anchor bolt specimens are damaged by the failure of the bolt outside the sleeve. The average extrusion stress, average shear stress and average bending stress of screw threads of specimens with different diameters, different pitches have little difference at the same connection length, which indicates that, within the range of the connecting length of the screw and the steel thread sleeve, the magnitude of the three stresses is only related to the connection length for multiples of diameter. The smaller the length of one-sided connection of the same diameter screw, the better the tensile deformation ability and ductility of the splice anchor bolt, so it is suggested that the length of one-sided connection between screw and sleeve is d(16, 20, 24 mm diameter screws screwed into sleeves 9 buckles, 27 mm diameter screws screwed into sleeves 10 buckles), which can not only ensure that the screw is not pulled out of the sleeve, but also has good ductility. The tensile strength of the single bolt is slightly higher than that of the spliced anchor bolt, but the stiffness of the spliced anchor bolt is slightly degraded when compared with the single bolt.

References:

[1] XIAO J Z,HUANG X,SHEN L M.Seismic Behavior of Semi-precast Column with Recycled Aggregate Concrete[J].Construction and Building Materials,2012,35:988-1001.
[2]SHEN L Y,TAM V W Y,LI C Y.Benefit Analysis on Replacing in Situ Concreting with Precast Slabs for Temporary Construction Works in Pursuing Sustainable Construction Practice[J].Resources Conservation and Recycling,2009,53(3):145-148.
[3]YANG K H,OH M H,KIM M H,et al.Flexural Behavior of Hybrid Precast Concrete Beams with H-steel Beams at Both Ends[J].Engineering Structures,2010,32(9):2940-2949.
[4]黄晟霖.500 MPa高强钢筋机械连接技术研究[D].南京:南京航空航天大学.2016.
HUANG Sheng-lin.Research on Mechanical Connection of 500 MPa High Strength Rebars[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2016.
[5]邢怀念,张小鹏,刘增利,等.钢筋滚轧直螺纹套筒连接性能试验研究[J].工业建筑,2009,39(增):846-849.
XING Huai-nian,ZHANG Xiao-peng,LIU Zeng-li,et al.Experimental Study on the Properties of Rebar Parallel Thread Sleeve Joint[J].Industrial Construction,2009,39(S):846-849.
[6]JGJ 107—2003,钢筋机械连接通用技术规程[S].
JGJ 107—2003,General Technical Specification for Mechanical Splicing of Bars[S].
[7]王贺郑,苗同臣,李永娟.滚轧直螺纹钢筋接头疲劳试验研究[J].工业建筑,2013,43(增):622-624,643.
WANG He-zheng,MIAO Tong-cheng,LI Yong-juan.The Fatigue Experiment Study of Rolled Straight Thread Rebar Joints[J].Industrial Construction,2013,43(S):622-624,643.
[8]安 晶,王振波.钢筋直螺纹连接强度分析[J].江南大学学报:自然科学版,2009,8(3):331-334.
AN Jing,WANG Zhen-bo.Strength Analysis of Reinforcebar Connector[J].Journal of Jiangnan University:Natural Science Edition,2009,8(3):331-334.
[9]RUANGRASSAMEE A,MOUNNARATH P.Monotonic and Cyclic Behaviors of Energy-dissipating Threaded Mechanical Splices[C]//WCEE.Proceedings of the 14th World Conference on Earthquake Engineering.Beijing:China Seismological Press,2008.
[10]UBC1997,Uniform Building Code[S].
[11]高中勤,庄晓亭,王 亮,等.钢构件与混凝土构件连接锚栓接长技术[J].钢结构,2010,25(2):64-65,60.
GAO Zhong-qin,ZHUANG Xiao-ting,WANG Liang,et al.Connection of Steel and Concrete Members with Anchor Bolt Joint Techniques[J].Steel Construction,2010,25(2):64-65,60.
[12]GB/T 193—2013,普通螺纹直径与螺距系列[S].
GB/T 193—2013,General Purpose Metric Screw Threads — General Plan[S].
[13]GB/T 196—2003,普通螺纹基本尺寸[S].
GB/T 196—2003,General Purpose Metric Screw Threads — Basic Dimensions[S].
[14]GB/T 197—2003,普通螺纹公差[S].
GB/T 197—2003,General Purpose Metric Screw Threads — Tolerances[S].
[15]JG/T 163—2013,钢筋机械连接用套筒[S].
JG/T 163—2013,Couplers for Rebar Mechanical Splicing[S].
[16]GB/T 228.1—2010,金属材料拉伸试验:第1部分:室温试验方法[S].
GB/T 228.1—2010,Metallic Materials — Tensile Testing — Part1:Method of Test at Room Temperature[S].
[17]但泽义,柴 昶,李国强,等.钢结构设计手册[M].4版.北京:中国建筑工业出版社,2019.
DAN Ze-yi,CHAI Chang,LI Guo-qiang,et al.Manual of Steel Structure Design[M].4th ed.Beijing:China Building Industry Press,2019.

Memo

Memo:
-
Last Update: 2020-07-29