|Table of Contents|

Numerical Simulation and Parameter Analysis of Bolted Glulam Beam-to-column Connections with Weakened Slotted-in Steel Plates(PDF)

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

Issue:
2022年05期
Page:
172-182
Research Field:
结构工程
Publishing date:

Info

Title:
Numerical Simulation and Parameter Analysis of Bolted Glulam Beam-to-column Connections with Weakened Slotted-in Steel Plates
Author(s):
CAO Wan-cheng1 WANG Xue-liang12 FENG Jia1 LIU Yang-mei3
(1. School of Civil Engineering and Architecture, Wuhan University of Technology, Wuhan 430070, Hubei, China; 2. Hainan Research Institute of Wuhan University of Technology, Sanya 572025, Hainan, China; 3. Hubei Fuhan Green Building Co., Ltd., Wuhan 430070, Hubei, China)
Keywords:
glulam frame connection with weakened slotted-in steel plate mechanical property ductility parameter analysis
PACS:
TU366.3
DOI:
10.19815/j.jace.2021.04083
Abstract:
A new type of connection with weakened slotted-in steel plates was designed, and several groups of finite element models were established for numerical analysis. The stiffness, ductility and bearing capacity of the new connection were compared to the ordinary connection. Considering the influence of the slots' number, edge distance, slot length, weakening height and other factors on the beam-column connection performance, the method of orthogonal design was used to determine the model scheme of different factor combination, and the finite element method was used to explore the influence degree and influence law of each factor on the beam-column connection performance. The results show that the stress and deformation of the connection are mainly concentrated on the steel plate which yields earlier than the cross-grain splitting of the timber. When the connection fails, the steel plate has yielded in a large area, which effectively avoids the premature splitting of the wood beam and provides better ductility for the beam-column connection.The influence of weakening height and the number of slots is the most significant. With the increase of the weakening height and the number of slot, the overall yield of the connection is earlier and the ductility is enhanced. Enlarging edge distance can also increase the bearing capacity, but the ductility decreases. The length of slot has limited influence on the stiffness of this connection, but it has obvious impact on the yield moment and ductility coefficient.

References:

[1] LAM F,GEHLOFF M,CLOSEN M.Moment-resisting Bolted Timber Connections[J].Proceedings of the Institution of Civil Engineers — Structures and Buildings,2010,163(4):267-274.
[2]王明谦,宋晓滨,顾祥林,等.胶合木梁柱螺栓-钢填板节点转动性能研究[J].建筑结构学报,2014,35(9):141-150.
WANG Ming-qian,SONG Xiao-bin,GU Xiang-lin,et al.Study on Rotational Behavior of Bolted Glulam Beam-to-column Connections with Slotted-in Steel Plates[J].Journal of Building Structures,2014,35(9):141-150.
[3]罗 烈,陈庆烈,宋晓滨.层板胶合木梁柱钢填板-螺栓连接节点横纹受力性能试验研究[J].建筑结构学报,2019,40(9):28-36.
LUO Lie,CHEN Qing-lie,SONG Xiao-bin.Experimental Study on Mechanical Behavior of Bolted Glulam Beam-to-column Connections with Slotted-in Steel Plates Loaded Perpendicular to Grain[J].Journal of Building Structures,2019,40(9):28-36.
[4]周晓强.木结构螺栓连接承载性能研究[D].哈尔滨:哈尔滨工业大学,2014.
ZHOU Xiao-qiang.Investigation of the Performance of Bolted Timber Connections[D].Harbin:Harbin Institute of Technology,2014.
[5]祝恩淳,王笑婷,牛 爽,等.木结构钢板螺栓连接节点承载力计算分析及试验研究[J].建筑结构学报,2020,41(1):113-121.
ZHU En-chun,WANG Xiao-ting,NIU Shuang,et al.Experimental and Analytical Study of Load-carrying Capability of Bolt Connected Joints with Steel Plates for Timber Structures[J].Journal of Building Structures,2020,41(1):113-121.
[6]陆伟东,孙洪锋,刘伟庆.自攻螺钉增强胶合木梁柱螺栓节点受力性能试验研究[J].建筑结构学报,2016,37(4):80-86.
LU Wei-dong,SUN Hong-feng,LIU Wei-qing.Experimental Study on Behavior of Bolted Glulam Beam-to-column Connections Strengthened by Self-tapping Screws[J].Journal of Building Structures,2016,37(4):80-86.
[7]赵 艺,何敏娟,马人乐.预应力方套管连接胶合木梁柱节点抗弯试验[J].同济大学学报(自然科学版),2016,44(8):1182-1189.
ZHAO Yi,HE Min-juan,MA Ren-le.Rotational Performance of Pre-stressed Multi-bolted Glulam Connection with Square Tubes[J].Journal of Tongji University(Natural Science),2016,44(8):1182-1189.
[8]GUAN Z W,RODD P D.Hollow Steel Dowels — A New Application in Semi-rigid Timber Connections[J].Engineering Structures,2001,23(1):110-119.
[9]RODD P D,LEIJTEN A M.High-performance Dowel-type Joints for Timber Structures[J].Progress in Structural Engineering and Materials,2003,5(2):77-89.
[10]LEIJTEN A J,RUXTON S,PRION H,et al.Reversed-cyclic Behavior of a Novel Heavy Timber Tube Connection[J].Journal of Structural Engineering,2006,132(8):1314-1319.
[11]LEIJTEN A J M,BRANDON D.Advances in Moment Transfering DVW Reinforced Timber Connections — Analysis and Experimental Verification,Part 1[J].Construction and Building Materials,2013,43:614-622.
[12]惠 卓,秦卫红,李云杰,等.胶合木端板连接节点低周反复试验与承载力[J].同济大学学报(自然科学版),2017,45(12):1765-1772.
HUI Zhuo,QIN Wei-hong,LI Yun-jie,et al.Low Cyclic Reversed Experiment and Capacity of Glued Laminated Timber Connections with Steel End Plate[J].Journal of Tongji University(Natural Science),2017,45(12):1765-1772.
[13]黄东升,周爱萍,张齐生,等.装配式木框架结构消能节点拟静力试验研究[J].建筑结构学报,2011,32(7):87-92.
HUANG Dong-sheng,ZHOU Ai-ping,ZHANG Qi-sheng,et al.Quasi-static Experimental Research on Energy Dissipating Joints for Assembled Timber Frame Structures[J].Journal of Building Structures,2011,32(7):87-92.
[14]杨会峰,凌志彬,刘伟庆,等.单调与低周反复荷载作用下胶合木梁柱延性抗弯节点试验研究[J].建筑结构学报,2015,36(10):131-138.
YANG Hui-feng,LING Zhi-bin,LIU Wei-qing,et al.Experimental Study on Ductile Moment-resisting Beam-to-column Glulam Connections Under Monotonic and Reversed Cyclic Loads[J].Journal of Building Structures,2015,36(10):131-138.
[15]SANDHAAS C.Mechanical Behaviour of Timber Joints with Slotted-in Steel Plates[D].Delft:Delft University of Technology,2012.
[16]GHARIB M,HASSANIEH A,VALIPOUR H,et al.Three-dimensional Constitutive Modelling of Arbitrarily Orientated Timber Based on Continuum Damage Mechanics[J].Finite Elements in Analysis and Design,2017,135:79-90.
[17]石亦平,周玉蓉.ABAQUS有限元分析实例详解[M].北京:机械工业出版社,2006.
SHI Yi-ping,ZHOU Yu-rong.Detailed Analysis of ABAQUS Finite Element Analysis[M].Beijing:China Machine Press,2006.
[18]王明谦,宋晓滨,顾祥林.基于三维弹塑性损伤模型的木材非线性分析[J].土木工程学报,2018,51(7):22-28,49.
WANG Ming-qian,SONG Xiao-bin,GU Xiang-lin.Nonlinear Analysis of Wood Based on Three-dimensional Combined Elastic-plastic and Damage Model[J].China Civil Engineering Journal,2018,51(7):22-28,49.
[19]赵 艺,何敏娟,马人乐.胶合木预应力套管螺栓群连接梁柱节点受弯承载力及参数分析[J].建筑结构学报,2016,37(10):18-26.
ZHAO Yi,HE Min-juan,MA Ren-le.Bending Bearing Capacity and Parametric Analysis of Prestressed Tube Bolted Timber Connections[J].Journal of Building Structures,2016,37(10):18-26.
[20]李 征,罗 晶,何敏娟,等.木梁柱螺栓钢填板节点转动性能理论计算方法[J].土木工程学报,2021,54(3):98-108,128.
LI Zheng,LUO Jing,HE Min-juan,et al.Analytical Investigation into the Rotational Behavior of Glulam Bolted Connections with Slotted-in Steel Plates Under Coupled Bending Moment and Shear Force[J].China Civil Engineering Journal,2021,54(3):98-108,128.
[21]SHU Z,LI Z,YU X S,et al.Rotational Performance of Glulam Bolted Joints:Experimental Investigation and Analytical Approach[J].Construction and Building Materials,2019,213:675-695.

Memo

Memo:
-
Last Update: 2022-09-30