|本期目录/Table of Contents|

[1]黄文金,陈宝春.钢管混凝土桁梁受弯试验研究[J].建筑科学与工程学报,2006,23(01):29-33.
 HUANG Wen-jin,CHEN Bao-chun.Experimental Research on Concrete-Filled Steel Tube Truss Girder Under Bending[J].Journal of Architecture and Civil Engineering,2006,23(01):29-33.
点击复制

钢管混凝土桁梁受弯试验研究(PDF)
分享到:

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:
23卷
期数:
2006年01期
页码:
29-33
栏目:
出版日期:
2006-03-20

文章信息/Info

Title:
Experimental Research on Concrete-Filled Steel Tube Truss Girder Under Bending
作者:
黄文金1,2,陈宝春1
1. 福州大学 土木建筑工程学院,福建 福州 350002; 2. 福建农林大学 交通学院,福建 福州 350002
Author(s):
HUANG Wen-jin1,2, CHEN Bao-chun1
1. School of Civil Engineering and Architecture, Fuzhou University, Fuzhou 350002, Fujian, China; 2. School of Transportation, Fujian Agriculture and Forestry University, Fuzhou 350002, Fujian, China
关键词:
钢管混凝土 桁梁 试验研究 极限承载力 管节点
Keywords:
concrete-filled steel tube truss girder experimental research ultimate load capacity tubular joint
分类号:
U528.59
DOI:
-
文献标志码:
A
摘要:
针对钢管混凝土桁式受弯构件的整体受力性能,设计并制作了钢管混凝土桁梁试件,进行了四分点对称加载,分析了钢管混凝土桁梁的变形与应变分布模式、破坏模式和承载力等。试验结果表明:钢管混凝土桁梁变形比实腹梁小很多且主要集中于边段; 桁梁节点受力复杂,节点承载力是结构承载力的控制因素; 弦杆填充混凝土可增大弦杆的径向刚度并约束节点变形,避免发生弦杆钢管塑性失效,从而提高节点承载力。四分点对称荷载作用下,全焊桁梁腹杆实际分担的轴力值小于铰接桁架的计算值,弦杆承受了较大的弯矩; 节点破坏前桁梁试件边段腹杆有较明显的剪切变形。
Abstract:
In order to make further investigation into the global action of concrete-filled steel tube(CFST)truss girder, experiment of CFST truss girder specimen under symmetrically quarter loading was carried out. Specimen of CFST truss girder was fabricated according to dimensions of stiffening girder and truss arch rib of several built bridges and code for design of steel tube structure. Based on the measured deflection and strain of specimen during experiment, the deformation, strain increasing mode of steel tube, failure mode and load-carrying capacity of joints as well as the whole girder were analyzed. The test result shows that deflection of CFST truss girder is mainly attributed to deformation of shear-bending parts and much smaller than that of solid web girder. The behaviors of joints are complex and its ultimate load capacity will control that of the truss girder. Filled concrete in the chord tubes can increase the member's radial rigidity and keep it from plastic failure thus strengthens the joints. Under the symmetrically quarter loading, axial forces in web members for CFST welding truss girder are commonly less than that of hinged truss, and the chord members are subjected to prominent bending moment. Before the failure of joints, obvious shear deformation among web members can be observed during shearing-bending parts.

参考文献/References:

[1] 沃登尼尔 J.钢管截面的结构应用[M].上海:同济大学出版社,2004. WARDENIER J.Construction Application of Steel Tubular Section[M].Shanghai:Tongji University Press,2004.
[2]陈以一,陈扬骥.钢管结构相贯节点的研究现状[J].建筑结构,2002,32(7):52-55. CHEN Yi-yi,CHEN Yang-ji.Research Actuality of Steel Tubular Structure Joints[J].Building Construction,2002,32(7):52-55.
[3]聂建国,秦 凯,张桂标.方钢管混凝土内隔板式节点的抗弯承载力研究[J].建筑科学与工程学报,2005,22(1):42-49. NIE Jian-guo,QIN Kai,ZHANG Gui-biao.Experimental Research and Theoretical Analysis on Flexural Capacity of Connections for Concrete-Filled Steel Square Tubular Columns with Inner Diaphragms[J].Journal of Architecture and Civil Engineering,2005,22(1):42-49.
[4]赵均海,郭红香,魏雪英.圆中空夹层钢管混凝土柱承载力研究[J].建筑科学与工程学报,2005,22(1):50-54. ZHAO Jun-hai,GUO Hong-xiang,WEI Xue-ying.Research on Bearing Capacity of Concrete Filled Double Skin Steel Tubes Column[J].Journal of Architecture and Civil Engineering,2005,22(1):50-54.
[5]YOSHINAGA S.Experiments on Concrete Filled and Reinforced Tubular K-Joints of Truss Girder[J].Journal of Constructional Steel Research,2004,60(5):683-689.
[6]庞守献.钢管混凝土梁模型的疲劳试验与分析[J].铁道建筑技术,1997,14(3):8-12. PANG Shou-xian.Fatigue Experiment and Analysis of Concrete Filled Steel Tubular Model[J].Railway Construction Technology,1997,14(3):8-12.
[7]蔡绍怀.钢管混凝土抗弯强度的试验研究[J].建筑结构,1985,15(3):28-29. CAI Shao-huai. Experimental Research on Bending Strength of Concrete Filled Steel Tubular[J].Building Construction,1985,15(3):28-29.
[8]陈宝春,盛 叶,韦建刚.钢管混凝土哑铃型梁受弯试验研究[J].工程力学,2005,22(4):119-125. CHEN Bao-chun, SHENG Ye,WEI Jian-gang.Experimental Study of Concrete Filled Steel Tubular Dumbbell-Shaped Beam Under Bending[J].Engineering Mechanics,2005,22(4):119-125.
[9]PACKER J A,HENDERSON J E,CAO J J.空心管结构连接设计指南[M].北京:科学出版社,1997. PACKER J A,HENDERSON J E,CAO J J.Hollow Tubular Structure Joint Design Guide[M].Beijing: Science Press,1997.
[10]GB 50017-2003,钢结构设计规范[S]. GB 50017-2003,Steel Structure Design Code[S].

相似文献/References:

[1]刘永健,姜 磊,张 宁.钢管混凝土中钢管的纵向容许应力[J].建筑科学与工程学报,2015,32(06):1.
 LIU Yong-jian,JIANG Lei,ZHANG Ning.Longitudinal Allowable Stress of Steel Tube in Concrete-filled Steel Tube[J].Journal of Architecture and Civil Engineering,2015,32(01):1.
[2]李文贵,罗智予,龙 初,等.钢管混凝土与钢管再生骨料混凝土抗冲击性能研究综述[J].建筑科学与工程学报,2016,33(04):25.
 LI Wen-gui,LUO Zhi-yu,LONG Chu,et al.Review of Impact Resistance of CFST and RACFST[J].Journal of Architecture and Civil Engineering,2016,33(01):25.
[3]赵金钢,赵人达,占玉林.钢管混凝土徐变效应随机性灵敏度分析[J].建筑科学与工程学报,2016,33(04):44.
 ZHAO Jin-gang,ZHAO Ren-da,ZHAN Yu-lin.Randomness Sensitivity Analysis of Creep Effect for Concrete-filled Steel Tube[J].Journal of Architecture and Civil Engineering,2016,33(01):44.
[4]晏巧玲,陈宝春,薛建阳.钢管混凝土平缀管格构柱换算长细比计算方法[J].建筑科学与工程学报,2016,33(06):98.
 YAN Qiao-ling,CHEN Bao-chun,XUE Jian-yang.Calculation Method on Equivalent Slenderness Ratio of Concrete-filled Steel Tube Battened Columns[J].Journal of Architecture and Civil Engineering,2016,33(01):98.
[5]黄卿维,余印根,韦建刚,等.钢管混凝土拱桥技术状况检测与评定[J].建筑科学与工程学报,2011,28(03):34.
 HUANG Qing-wei,YU Yin-gen,WEI Jian-gang,et al.Technical Detection and Assessment of Concrete-filled Steel Tubular Arch Bridge[J].Journal of Architecture and Civil Engineering,2011,28(01):34.
[6]檀永杰,徐波,吴智敏,等.基于超声对测法的钢管混凝土脱空检测试验[J].建筑科学与工程学报,2012,29(02):102.
 TAN Yong-jie,XU Bo,WU Zhi-min,et al.Experiment on Void Area Testing of Concrete-filled Steel Tube Based on Ultrasonic Testing Method[J].Journal of Architecture and Civil Engineering,2012,29(01):102.
[7]魏锦,赵均海,刘彦东,等.钢管混凝土轴压短柱的极限承载力分析[J].建筑科学与工程学报,2008,25(03):81.
 WEI Jin,ZHAO Jun-hai,LIU Yan-dong,et al.Analysis of Ultimate Bearing Capacity of Concrete-filled Steel Tubular Axial Compression Short Columns[J].Journal of Architecture and Civil Engineering,2008,25(01):81.
[8]高婧,陈宝春.波形钢板钢管混凝土柱的极限承载力[J].建筑科学与工程学报,2008,25(04):47.
 GAO Jing,CHEN Bao-chun.Ultimate Load Carrying Capacity of Concrete-filled Steel Tubular Column with Corrugated Steel Webs[J].Journal of Architecture and Civil Engineering,2008,25(01):47.
[9]王毅红,郭增辉,李先顺,等.带有芯钢管的钢管混凝土节点的受力机理[J].建筑科学与工程学报,2007,24(01):64.
 WANG Yi-hong,GUO Zeng-hui,LI Xian-shun,et al.Bearing Mechanism of Concrete-filled Steel Tubular Joint with Core Steel Tube[J].Journal of Architecture and Civil Engineering,2007,24(01):64.
[10]宋兵,王湛.高强混凝土自收缩对钢管混凝土轴压力学性能的影响[J].建筑科学与工程学报,2007,24(02):59.
 SONG Bing,WANG Zhan.Influences of Autogenous Shrinkage of High-strength Concrete on AxialCompression Mechanics Behavior of Concrete-filled Steel Tube[J].Journal of Architecture and Civil Engineering,2007,24(01):59.

备注/Memo

备注/Memo:
收稿日期:2005-12-09
基金项目:国家自然科学基金项目(50578042)
作者简介:黄文金(1975-),男,福建莆田人,福建农林大学讲师,福州大学工学博士研究生,E-mail:wenjinhuang@fzu.edu.cn。
更新日期/Last Update: 2006-03-20