|本期目录/Table of Contents|

[1]刁波,王茜,孙洋,等.L形柱结构附加扭转试验及剪扭承载力分析[J].建筑科学与工程学报,2007,24(04):21-28.
 DIAO Bo,WANG Qian,SUN Yang,et al.Experiment on Additional Torsion of L-shaped Column Frame and Bearing Capacity Analysis of Shear and Torsion[J].Journal of Architecture and Civil Engineering,2007,24(04):21-28.
点击复制

L形柱结构附加扭转试验及剪扭承载力分析(PDF)
分享到:

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:
24卷
期数:
2007年04期
页码:
21-28
栏目:
出版日期:
2007-12-20

文章信息/Info

Title:
Experiment on Additional Torsion of L-shaped Column Frame and Bearing Capacity Analysis of Shear and Torsion
作者:
刁波王茜孙洋李淑春罗佑新
北京航空航天大学 土木工程系,北京 100083
Author(s):
DIAO Bo, WANG Qian, SUN Yang, LI Shu-chun, LUO You-xin
Department of Civil Engineering, Beihang University, Beijing100083, China
关键词:
异形柱结构 扭转效应 L形柱结构 剪扭 承载力
Keywords:
special-shaped column frame torsion effect L-shaped column frame shear and torsion bearing capacity
分类号:
TU375.3
DOI:
-
文献标志码:
A
摘要:
在试验的基础上,考察了在低周反复荷载作用下L形柱所产生的扭转效应,并借鉴规范对复合受力构件剪扭承载力的计算方法,定量地分析了附加扭矩对L形柱所产生的影响。研究结果表明:单个L形柱和结构中的L形框架柱受扭性能不同,前者对水平荷载的加载角度表现敏感,非对称加载时,附加扭矩的影响不可忽略,设计中应考虑弯剪扭的复合作用; 而后者作为结构中协同工作的一部分,抗扭性能明显改善。
Abstract:
The torsion effect of L-shaped column under low cyclic loading was discussed based on the experiment. The bearing capacity calculation method of shear and torsion of component under combined forces was gained by referring to standard, at the same time, the influence of additional torque to L-shaped column was quantitatively analyzed. The result shows that the torsion performance in single L-shaped column is different with that in column frame; the former is sensitive to loading angle of horizontal load, and its additional torque influence can not be ignored under asymmetric loading, meanwhile, the composite action of bending, shear and torsion in design should be considered in terms of the re-torsion capacity of latter, as a part of the structure that works together is advanced obviously.

参考文献/References:

[1] 曹万林.不同方向周期反复荷载作用下L形柱的性能[J].地震工程与工程振动,1995,15(1):67-72.
CAO Wan-lin.Behavior of L Shaped Column Under Different Directional Cyclic Loadings[J].Earthquake Engineering and Engineering Vibration,1995,15(1):67-72.
[2]吴敏哲,郭 棣.钢筋混凝土L形截面柱受力性能分析[J].世界地震工程,2002,18(1):66-72.
WU Min-zhe,GUO Di.Behavior Anylysis of Reinforced Concrete L Shaped Column[J].World Earthquake Engineering,2002,18(1):66-72.
[3]冯建平.混凝土L形截面柱抗剪承载力的试验研究[J].华南理工大学学报:自然科学版,1995,23(1):68-75.
FENG Jian-ping.The Experiment Study of Shear Strength of L-shaped Columns[J].Journal of South China University of Technology:Natural Science Edition,1995,23(1):68-75.
[4]康谷贻,巩长江.单调及低周反复荷载作用下异形截面框架柱的受剪性能[J].建筑结构学报,1997,18(5):22-31.
KANG Gu-yi,GONG Chang-jiang.Shear Properties of Special Shaped Section Frame Columns Under Monotonic and Horizontal Low Cyclic Loadings[J].Journal of Building Structures,1997,18(5):22-31.
[5]孙黄胜.钢筋混凝土复合受扭构件的开裂扭矩计算[J].青岛建筑工程学院学报,2001,22(3):5-8.
SUN Huang-sheng.The Calculation of Cracking Torque of Reinforced Concrete Members Subjected to Combined Torsion[J].Journal of Qingdao Institute of Architecture and Engineering,2001,22(3):5-8.
[6]陆新征,江见鲸.利用斜支撑提高异形柱框架结构抗扭性能的研究[J].工业建筑,2002,32(6):39-41.
LU Xin-zheng,JIANG Jian-jing.Studies on Improving the Torsion Resistance Ability of Special Shape Column Frames Using Inclined Supports[J].Industrial Construction,2002,32(6):39-41.
[7]郭军庆,王雪韵,雷自学,等.加芯混凝土框架柱轴压比限值试验研究[J].建筑科学与工程学报,2005,22(4):45-49.
GUO Jun-qing,WANG Xue-yun,LEI Zi-xue,et al.Experimental Research on Limit Value of Axial Compression Ratio for Concrete Frame Columns with Central Reinforcement[J].Journal of Architecture and Civil Engineering,2005,22(4):45-49.
[8]曹宝珠,周绪红,刘永健.钢管混凝土桁架新型节点试验研究[J].建筑科学与工程学报,2006,23(1):45-48.
CAO Bao-zhu,ZHOU Xu-hong,LIU Yong-jian.Experimental Research on New Joints of Concrete-filled Steel Tube Truss[J].Journal of Architecture and Civil Engineering,2006,23(1):45-48.
[9]单 炜,李玉顺,于 玲,等.异形截面斜拉桥索塔锚固区节段足尺模型试验研究[J].中国公路学报,2005,18(3):60-65.
SHAN Wei,LI Yu-shun,YU Ling,et al.Experimental Research on Full-scale Model for Anchorage Zone of Pylon of Cable-stayed Bridge with Illegal-shaped Section[J].China Journal of Highway and Transport,2005,18(3):60-65.
[10]楼铁炯,郭乙木,王振林,等.任意截面无粘结预应力混凝土梁的极限非线性分析[J].中国公路学报,2005,18(1):77-80.
LOU Tie-jiong,GUO Yi-mu,WANG Zhen-lin,et al.Nonlinear Analysis of Unbonded Prestressed Beams with Arbitrary Section at Ultimate[J].China Journal of Highway and Transport,2005,18(1):77-80.
[11]王元清,张 勇,石永久,等.吊索与钢管混凝土拱桥新型节点承载性能分析[J].建筑科学与工程学报,2005,22(3):55-58.
WANG Yuan-qing,ZHANG Yong,SHI Yong-jiu,et al.Analysis of Load Capacity of New-style Joints Between Cable and Concrete-filled Steel Tube Arch Bridge[J].Journal of Architecture and Civil Engineering,2005,22(3):55-58.
[12]沈蒲生,孟焕陵.框筒结构梁柱截面基于剪力滞最小的合理高度[J].建筑科学与工程学报,2005,22(3):16-19.
SHEN Pu-sheng,MENG Huan-ling.Reasonable Section Height of Beam and Column Based on the Minimum Shear Lag in Framed Tube Structures[J].Journal of Architecture and Civil Engineering,2005,22(3):16-19.

相似文献/References:

[1]刘向斌,周天华,何鑫,等.冷弯薄壁型钢住宅结构整体扭转效应分析[J].建筑科学与工程学报,2012,29(02):83.
 LIU Xiang-bin,ZHOU Tian-hua,HE Xin,et al.Analysis of Torsional Effect of Cold-formed Thin-walled Steel Residence Structure[J].Journal of Architecture and Civil Engineering,2012,29(04):83.

备注/Memo

备注/Memo:
收稿日期:2007-11-05
基金项目:国家自然科学基金项目(50678016)
作者简介:刁 波(1958-),女,山东烟台人,教授,博士生导师,工学博士,博士后,E-mail:diaobo@263.net。
更新日期/Last Update: 2007-12-20