|本期目录/Table of Contents|

[1]陈绍蕃.单边连接单角钢压杆的计算与构造[J].建筑科学与工程学报,2008,25(02):72-78.
　CHEN Shao-fan.Calculation and Construction of Single-angle Steel Struts Connected by One Leg[J].Journal of Architecture and Civil Engineering,2008,25(02):72-78.
点击复制

单边连接单角钢压杆的计算与构造(PDF)
分享到：

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:
25卷
期数:
2008年02期
页码:
72-78
栏目:
出版日期:
2008-06-20

文章信息/Info

Title:
Calculation and Construction of Single-angle Steel Struts Connected by One Leg
作者:
陈绍蕃
西安建筑科技大学结构工程与抗震教育部重点实验室,陕西西安710055
Author(s):
CHEN Shao-fan
Key Laboratory of Structural Engineering and Earthquake Resistance of Ministry of Education, Xi'an University of Architecture and Technology, Xi'an 710055, Shaanxi, China
关键词:
单角钢压杆;  等效长细比;  节点偏心;  宽厚比;  连接肢
Keywords:
single-angle steel strut;  equivalent slenderness ratio;  joint eccentricity;  width-thickness ratio;  connecting leg
分类号:
TU311.2
DOI:
-
文献标志码:
A
摘要:
在详细分析各国现有试验资料的基础上,提出了用于平面桁架设计的等效长细比计算公式,其主要特点是可以直接计算不同强度等级角钢压杆的长细比,提出了连接肢宽厚比限值的计算公式。分析结果表明:设计单边连接的单角钢压杆,除正确计算外,还应考虑构造措施的影响,并且腹杆应该配置在弦杆同一侧; 节点连接板的厚度、连接肢的宽厚比等也需要有所考虑。
Abstract:
Based on analyzing the available test data in detail, the calculation formulae of equivalent slenderness ratio which were used in planar truss design were put forward. The feature of these formulae lied in giving directly reduced slenderness ratio for angle steel of various strength grades. Beside correct calculation, the analytical results show that the effects of constructional measures have to be considered in designing single-angle steel struts connected by one leg except for correct calculation. Web members can be laid on a same side of the chord, the thickness of gusset plate and the width-thickness ratio have to be concerned. These issues are discussed and calculation formulae of width-thickness ratio limiting values of connecting leg are proposed.

参考文献/References:

[1] GALAMBOS T V.Guide to Stability Design Criteria for Metal Structures[M].5th ed.New York:John Wiley & Sons,1998.
[2]WOOLCOCK S T,KITIPORNCHAI S.Design of Single Angle Web Struts in Trusses[J].Struct Engrg,1986,112(6):1327-1345.
[3]轻型构件小组.单面连接的单角钢单圆钢杆件的稳定性[J].冶金建筑,1977,7(增):56-68. Light Steel Member Team.Stability of Single Angle and Single Round Members Connected by OneSide[J].Metallurgical Construction,1977,7(S):56-68.
[4]LUTZ L A.Effective Slenderness Approach for Evalu-ating Single Angle Compression Struts[C]//SSRC.2003 SSRC Annual Technical Session Proceedings.Baltimore:SSRC,2003:35-51.
[5]USAMI T,GALAMBOS T V.On the Strength of Restrained Single Angle Columns Under Biaxial Bending[J].Papers and Reports of Japanese Society of Civil Engineering,1971,191:31-41.
[6]ELGAALY M,PAGHER H,DAVIDS W.Behavior of Single-angle-compression Members[J].Struct Engrg,1991,117(12):3720-3741.
[7]TEMPLE M C,SAKLA S S.Single-angle Compression Members Welded by One Leg to a Gusset Plate:Experimental Study[J].Can J Civ Eng,1998,25(3):569-584.
[8]MENGELKOCH N S,YURA J A.Single-angle Compression Members Loaded Through One Leg[C]//SSRC.2002 SSRC Annual Technical Session Proceedings.Gainesville:SSRC,2002:201-218.
[9]沈祖炎,胡学仁.单角钢压杆的稳定计算[J].同济大学学报,1982,10(2):56-71. SHEN Zu-yan,HU Xue-ren.Ultimate Strength of Single Angle Columns[J].Journal of Tongji Univer-sity,1982,10(2):56-71.
[10]陈绍蕃.钢结构设计原理[M].3版.北京:科学出版社,2005. CHEN Shao-fan.Principles of Steel Structure Design[M].3rd ed.Beijing:Science Press,2005.
[11]WOOLCOCK S T,KITIPORNCHAI S.The Design of Single AngleStruts[J].Steel Construction,1980,14(4):2-23.

相似文献/References:

备注/Memo

备注/Memo:
收稿日期:2008-04-03
作者简介:陈绍蕃(1919-),男,浙江海盐人,教授,博士研究生导师,E-mail:chensf2@yahoo.com.cn。
更新日期/Last Update: 2008-06-20