«上一篇/Previous Article|本期目录/Table of Contents|下一篇/Next Article»

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:

26卷

期数:

2009年01期

页码:

107-114

栏目:

出版日期:

2009-03-20

文章信息/Info

Title:

Simulated Forming and Quality Assessment in Design of Cutting Membrane Structures

作者:

周树路，叶继红

东南大学土木工程学院,江苏南京210096

Author(s):

ZHOU Shu-lu, YE Ji-hong

School of Civil Engineering, Southeast University, Nanjing 210096, Jiangsu, China

关键词:

膜结构;  裁剪分析;  仿真成形;  质量评价

Keywords:

membrane structure;  cutting analysis;  simulated forming;  quality assessment

分类号:

TU311.4

DOI:

-

文献标志码:

A

摘要:

改进了传统的膜结构设计过程,即加入了膜结构缝合后模拟成形的过程; 利用非线性有限元法,将设计(找形、裁剪)完成的膜结构仿真成形,从理论上检验裁剪膜片仿真成形后的应力状态,提出了裁剪膜片的质量评价标准; 对常见的马鞍形膜面和伞形膜面进行了仿真成形分析,考察了结构矢跨比、裁剪宽度以及裁剪方向3个因素对其裁剪质量的影响。结果表明:所得结论能够为膜结构裁剪设计提供参考。

Abstract:

The process of the design of membrane structures was developed by presenting concept of simulated forming, which was based on nonlinear finite element method. Simulated forming meant all the plane pieces of membrane material which were cut corresponding to the designed initial equilibrium state were sewed again. Meanwhile, the stress distribution of the cutting membrane structure was obtained, by which the quality of cutting diaphragm could be tested. Finally, the simulated forming analyses for common HP-type and umbrella-type membrane structures were carried out, and three factors, such as rise-span ratio, cutting width and cutting direction of the structures, which affected cutting quality were considered. The conclusion can provide a reference for design of cutting membrane structures.

参考文献/References:

[1] BUCHHOLDT H A.An Introduction to Cable Roof Structures[M].2nd ed.London:Thomas Telford Ltd,1999:1-63.
[2]KAZUO I.Membrane Designs and Structures in the World[M].Tokyo:Shinkenchiku-sha,1999:73-156.
[3]徐旭东.索膜结构分析的全过程[D].杭州:浙江大学,2002. XU Xu-dong.The Whole Procedure of Cable and Membrane Structures' Analysis[D].Hangzhou:Zhejiang University,2002.
[4]马 明,蓝 天.膜结构裁剪分析中曲面的模拟与短程线的生成[J].土木工程学报,2002,35(5):20-23. MA Ming,LAN Tian.The Simulation of Curved Surface and Generation of Geodesic Lines in Cutting Pattern for Membrane Structures[J].China Civil Engin- eering Journal,2002,35(5):20-23.
[5]赵 杰,杨庆山.膜曲面裁剪及平面展开的二次测地线法[C]//空间结构委员会.第十届空间结构学术会议论文集.北京:中国建材工业出版社,2002:454-460. ZHAO Jie,YANG Qing-shan.Secondary Geodesic Line Method for Both Cutting and Spreading of Membrane Structure[C]//Committee for Spatial Structures.Proceeding of the 10th National Conference of Spatial Structures.Beijing:China Building Material Industry Publishing House,2002:454-460.
[6]张 莉,张其林,龚 铭,等.任意空间曲面近似展开成平面的板单元有限元算法[C]//空间结构委员会.第九届空间结构学术会议论文集.北京:中国建材工业出版社,2000:273-280. ZHANG Li,ZHANG Qi-lin,GONG Ming,et al.PlateElement Method for Cutting Pattern of Membrane Structures[C]//Committee for Spatial Structures.Proceeding of the 9th National Conference of Spatial Structures.Beijing:China Building Material Industry Publishing House,2000:273-280.
[7]杨庆山,姜忆南.张拉索-膜结构分析与设计[M].北京:科学出版社,2004:1-205. YANG Qing-shan,JIANG Yi-nan.Analysis and Design of TensionedCable-membrane Structures[M].Beijing:Science Press,2004:1-205.
[8]张汝清,詹先义.非线性有限元分析[M].重庆:重庆大学出版社,1990:24-78. ZHANG Ru-qing,ZHAN Xian-yi.Nonlinear Finite Element Analysis[M].Chongqing:Chongqing University Press,1990:24-78.
[9]李 璟,韩大建.索膜结构风振响应的神经网络辅助参数分析方法[J].建筑科学与工程学报,2008,25(4):98-104. LI Jing,HAN Da-jian.Neural Network Aided Parametric Analysis Method of Wind-induced Response for Cable-membrane Structures[J].Journal of Architecture and Civil Engineering,2008,25(4):98-104.

相似文献/References:

[1]童丽萍,曹延波,司瑞娟.敞篷式体育场膜结构找形分析[J].建筑科学与工程学报,2008,25(01):111.
　TONG Li-ping,CAO Yan-bo,SI Rui-juan.Form-finding Analysis for Membrane Structure of Open Stadium[J].Journal of Architecture and Civil Engineering,2008,25(01):111.

备注/Memo

备注/Memo:

收稿日期:2008-11-19
基金项目:江苏省“六大人才高峰”资助项目(建筑B类)
作者简介:周树路(1984-),男,安徽滁州人,工学硕士,E-mail:zhou_shulu@yahoo.com.cn。

常用功能

更新日期/Last Update: 2009-03-20