|本期目录/Table of Contents|

[1]黄海林,宾 智,祝明桥,等.T形肋GFRP抗剪连接件的静载推出试验[J].建筑科学与工程学报,2016,33(02):77-83.
　HUANG Hai-lin,BIN Zhi,ZHU Ming-qiao,et al.Static Push-out Tests for T-type Rib GFRP Shear Connectors[J].Journal of Architecture and Civil Engineering,2016,33(02):77-83.
点击复制

T形肋GFRP抗剪连接件的静载推出试验(PDF)
分享到：

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:
33卷
期数:
2016年02期
页码:
77-83
栏目:
出版日期:
2016-03-30

文章信息/Info

Title:
Static Push-out Tests for T-type Rib GFRP Shear Connectors
作者:
黄海林，宾 智，祝明桥，曾垂军，吕伟荣
湖南科技大学土木工程学院
Author(s):
HUANG Hai-lin, BIN Zhi, ZHU Ming-qiao, ZENG Chui-jun, LU Wei-rong
School of Civil Engineering, Hunan University of Science and Technology
关键词:
抗剪连接件; GFRP; 推出试验; T形肋; 粘结滑移性能; 极限承载力; 破坏机理
Keywords:
shear connector;  GFRP;  push-out test;  T-type rib;  bond-slip behavior;  ultimate bearing capacity;  failure mechanism
分类号:
-
DOI:
-
文献标志码:
A
摘要:
为改善玻璃纤维增强塑料（GFRP）与混凝土的界面粘结性能，进行了3组共计9个T形肋GFRP抗剪连接件的静载推出试验，主要考虑了T形肋内开孔及横向穿孔钢筋2个参数对其抗剪性能的影响，得到了破坏形态、裂缝分布规律及荷载相对滑移关系，分析了T形肋对GFRP抗剪连接件粘结滑移性能、极限承载力以及破坏机理的影响。基于试验得到的破坏机理建立了T形肋GFRP抗剪连接件的极限承载力计算公式。结果表明：T形肋增加了GFRP抗剪连接件与混凝土的接触面积，提高了界面的粘结力；界面出现滑移后，T形肋孔内的混凝土榫或钢筋混凝土榫能提供更好的抗剪性能；孔内是否配置横向穿孔钢筋将导致试件出现2种不同的破坏形态。
Abstract:
In order to improve the interfacial bond properties between GFRP and concrete, push-out tests were conducted to investigate the mechanical behaviors of nine T-type rib GFRP shear connectors, considering the effects of holes and horizontal perforated steel bars. The failure patterns, crack distribution rules and load-relative slip relationships, were obtained by contrast experiments. The effect of T-type rib on load-slip behaviors, ultimate bearing and damage mechanisms capacities of shear connectors were analyzed. The formulae of ultimate bearing capacity were proposed. The results show that contact surface areas are increased and interfacial bond properties between T-type rib GFRP shear connectors and concrete are improved. Concrete tenon or rebar tenon of T-type perfobond rib GFRP shear connectors can provide better shear capacities after interface slipping. Whether the configuring of horizontal perforated steel bars will lead to two different failure patterns.

参考文献/References:

相似文献/References:

[1]吴方伯,刘 彪,邓利斌,等.新型叠合梁端部抗剪性能试验[J].建筑科学与工程学报,2014,31(02):26.
[2]方 海,韩 娟,刘伟庆,等.GFRP-花旗松胶合木夹芯桥面板受弯性能试验与结构设计[J].建筑科学与工程学报,2014,31(03):58.
　FANG Hai,HAN Juan,LIU Wei-qing,et al.Experiment on Bending Capacity and Structural Design of GFRP-pseudotsuga Taxifolia Glulam Bridge Deck[J].Journal of Architecture and Civil Engineering,2014,31(02):58.
[3]王 跃,方 海,刘伟庆.钢蒙皮-复合材料芯材夹层板弯曲性能研究[J].建筑科学与工程学报,2015,32(01):73.
　WANG Yue,FANG Hai,LIU Wei-qing.Research on Bending Properties of Metal Faced-composite Core Sandwich Panel[J].Journal of Architecture and Civil Engineering,2015,32(02):73.
[4]吴方伯,段芳敏,欧阳靖,等.免模保温剪力墙施工工艺及抗震性能[J].建筑科学与工程学报,2017,34(05):83.
　WU Fang-bo,DUAN Fang-min,OUYANG Jing,et al.Construction Process and Seismic Performance of Non-template Insulation Shear Wall[J].Journal of Architecture and Civil Engineering,2017,34(02):83.
[5]吴方伯,张高波,欧阳靖,等.免模剪力墙抗震性能试验[J].建筑科学与工程学报,2019,36(01):22.
　WU Fang-bo,ZHANG Gao-bo,OUYANG Jing,et al.Experiment on Seismic Behavior of Non-formwork Shear Wall[J].Journal of Architecture and Civil Engineering,2019,36(02):22.

备注/Memo

备注/Memo:
更新日期/Last Update: 2016-03-30