|本期目录/Table of Contents|

[1]谷 倩,任 靖,张延宾,等.双面叠合剪力墙平面外受力性能[J].建筑科学与工程学报,2020,37(04):32-41.[doi:10.19815/j.jace.2019.11004]
　GU Qian,REN Jing,ZHANG Yan-bin,et al.Out-of-plane Mechanical Behavior of Double-face Superposed Shear Wall[J].Journal of Architecture and Civil Engineering,2020,37(04):32-41.[doi:10.19815/j.jace.2019.11004]
点击复制

双面叠合剪力墙平面外受力性能(PDF)
分享到：

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:
37卷
期数:
2020年04期
页码:
32-41
栏目:
出版日期:
2020-07-30

文章信息/Info

Title:
Out-of-plane Mechanical Behavior of Double-face Superposed Shear Wall
文章编号:
1673-2049(2020)04-0032-10
作者:
谷 倩1,任 靖1,张延宾1,赵端锋1,谭 园2
(1. 武汉理工大学 土木工程与建筑学院,湖北 武汉 430070; 2. 美好建筑装配科技有限公司,湖北 武汉 430050)
Author(s):
GU Qian1, REN Jing1, ZHANG Yan-bin1, ZHAO Duan-feng1, TAN Yuan2
(1. School of Civil Engineering and Architecture, Wuhan University of Technology, Wuhan 430070, Hubei, China; 2. Myhome Prefabricated Building and Technological Co., Ltd., Wuhan 430050, Hubei, China)
关键词:
双面叠合剪力墙;  水平接缝;  平面外受力性能;  承载力计算
Keywords:
double-face superposed shear wall;  horizontal joint;  out-of-plane mechanical behavior;  calculation of bearing capacity
分类号:
TU375
DOI:
10.19815/j.jace.2019.11004
文献标志码:
A
摘要:
为研究带水平接缝的装配整体式双面叠合剪力墙的平面外受力性能,完成了1片双面叠合剪力墙和1片现浇剪力墙足尺试件的平面外静力加载试验和有限元参数分析,对比分析了各试件的破坏形态、荷载-位移曲线、刚度退化特征和水平接缝处竖向连接钢筋的传力性能,提出了双面叠合剪力墙平面外受弯承载力和水平接缝截面受剪承载力的计算方法。结果表明:双面叠合剪力墙与现浇剪力墙试件的破坏形态基本相同,均为平面外弯曲破坏,与现浇剪力墙相比,双面叠合剪力墙试件的初始裂缝出现在底部水平接缝处,随后在墙面出现并逐级向上发展,表现出良好的延性破坏特征; 双面叠合剪力墙试件具有较高的平面外受弯承载力和变形能力,其初始刚度、极限承载力、平面外位移延性系数均大于现浇剪力墙试件; 双面叠合剪力墙试件的有限元计算结果与试验结果吻合良好; 随着轴压比增加,叠合剪力墙平面外承载力明显增加,但延性明显降低; 高厚比越小,叠合剪力墙平面外承载力越高,而对延性则影响不大; 提出的受弯承载力计算结果与试验结果吻合较好,可用于指导工程实践。
Abstract:
In order to study the out-of-plane mechanical behavior of assembly double-face superposed shear wall with horizontal joint, the out-of-plane static loading test and finite element parameter analysis of one full-scale specimen of double-face superposed shear wall and one cast-in-place shear wall were completed. The failure mode, load-displacement curve, stiffness degradation characteristics and the force transfer performance of the vertical connection reinforcement at the horizontal joint were compared and analyzed. The out-of-plane bending capacity and the shear bearing capacity of the horizontal joint section of the double-face superposed shear wall were proposed. The results show that the failure modes of the double-face shear wall and cast-in-situ shear wall are basically the same, both of them are out-of-plane bending failure. Compared with the cast-in-situ shear wall, the initial crack of the double-face superposed shear wall specimen appears at the bottom horizontal joint, and then the crack appears on the wall surface and develops progressively upward, showing good ductile failure characteristics. The double-face superposed shear wall specimen has higher out-of-plane bending capacity and deformation capacity, and their initial stiffness, ultimate bearing capacity and out-of-plane displacement ductility coefficient are all larger than those of cast-in-situ shear wall specimen. The simulation results of finite element calculation of double-face superposed shear wall specimen are in good agreement with the experimental results. With the increase of axial compression ratio, the out-of-plane bearing capacity of the double-face superposed shear wall increases significantly, but the ductility decreases obviously. The smaller the height to thickness ratio, the higher the out-of-plane bearing capacity of the double-face superposed shear wall, but it has little effect on ductility. The calculated results of flexural bearing capacity formula proposed are in good agreement with the test results, which can be used to guide engineering practice.

参考文献/References:

[1] 赵作周,周 剑,侯建群,等.装配式混凝土剪力墙结构水平缝抗剪机理及承载力计算方法综述[J].建筑结构,2015,45(12):40-47,39.
ZHAO Zuo-zhou,ZHOU Jian,HOU Jian-qun,et al.Review of Studies on Shear Resisting Mechanisms and Calculating Formulas of Shear Resisting Capacity of Horizontal Joints in Fabricated Reinforced Concrete Shear Wall Structures[J].Building Structure,2015,45(12):40-47,39.
[2]纪 强,周苗苗.浅谈装配式混凝土结构体系的发展方向[J].住宅产业,2016(8):22-24.
JI Qiang,ZHOU Miao-miao.Development of Fabricated Concrete Structure System[J].Housing Industry,2016(8):22-24.
[3]蒋 庆,叶献国,种 迅.叠合板式剪力墙的力学计算模型[J].土木工程学报,2012,45(1):8-12,141.
JIANG Qing,YE Xian-guo,CHONG Xun.Calculation Model for Superimposed Slab Shear Walls[J].China Civil Engineering Journal,2012,45(1):8-12,141.
[4]张文莹,杨联萍,余少乐,等.双面叠合剪力墙关键问题研究:水平连接节点抗震性能试验[J].土木工程学报,2018,51(12):28-41.
ZHANG Wen-ying,YANG Lian-ping,YU Shao-le,et al.Research on Key Issues of the Double-superimposed Shear Wall:Experimental Study on Seismic Performance of Horizontal Connections[J].China Civil Engineering Journal,2018,51(12):28-41.
[5]ALDEMIR A,BINICI B,CANBAY E.Cyclic Testing of Reinforced Concrete Double Walls[J].ACI Structural Journal,2017,114(2):395-406.
[6]沈小璞,马 巍,陈信堂,等.叠合混凝土墙板竖向拼缝连接抗震性能试验研究[J].合肥工业大学学报:自然科学版,2010,33(9):1366-1371.
SHEN Xiao-pu,MA Wei,CHEN Xin-tang,et al.Experimental Study of the Seismic Performance of the Vertical Joint Seam of Superimposed Concrete Wall Panels[J].Journal of Hefei University of Technology:Natural Science,2010,33(9):1366-1371.
[7]王滋军,李向民,王 宇,等.带有约束边缘构件的预制叠合剪力墙抗震性能试验研究[J].中南大学学报:自然科学版,2016,47(8):2759-2767.
WANG Zi-jun,LI Xiang-min,WANG Yu,et al.Experimental Study on Seismic Behavior of Reinforced Concrete Composite Shear Wall with Confined Boundary Member[J].Journal of Central South University:Science and Technology,2016,47(8):2759-2767.
[8]侯和涛,颜雪雪,程积润,等.不同轴压比钢管混凝土边缘约束叠合剪力墙的抗震性能[J].土木与环境工程学报:中英文,2019,41(5):73-81.
HOU He-tao,YAN Xue-xue,CHENG Ji-run,et al.Seismic Behavior of Shear Walls with Concrete Filled Tube Under Different Axial Compression Ratios[J].Journal of Civil and Environmental Engineering,2019,41(5):73-81.
[9]AMRAN Y H M,RASHZD R S M,HEJAZI F,et al.Response of Precast Foamed Concrete Sandwich Panels to Flexural Loading[J].Journal of Building Engineering,2016,7:143-158.
[10]种 迅,黄俊旗,蒋 庆,等.嵌入式基础叠合墙板平面外受弯性能试验研究与数值模拟分析[J].工程力学,2015,32(5):131-137.
CHONG Xun,HUANG Jun-qi,JIANG Qing,et al.Experimental and Numerical Study on Out-of-plane Bending Behavior of a Superimposed Wall with Embedded Foundation[J].Engineering Mechanics,2015,32(5):131-137.
[11]薛伟辰,李 亚,蔡 磊,等.双面叠合混凝土剪力墙平面内和平面外抗震性能研究[J].工程力学,2018,35(5):47-53,142.
XUE Wei-chen,LI Ya,CAI Lei,et al.In-plane and Out-of-plane Mechanical Behavior of Double faced Superposed Concrete Shear Walls[J].Engineering Mechanics,2018,35(5):47-53,142.
[12]GB/T 51231—2016,装配式混凝土建筑技术标准[S].
GB/T 51231—2016,Technical Standard for Assembled Buildings with Concrete Structure[S].
[13]GB/T 50081—2002,普通混凝土力学性能试验方法标准[S].
GB/T 50081—2002,Standard for Test Method of Mechanical Properties on Ordinary Concrete[S].
[14]GB/T 228.1—2010,金属材料拉伸试验第1部分:室温试验方法[S].
GB/T228.1—2010,Metallic Materials — Tensile Testing — Part1:Method of Test at Room Temperature[S].
[15]GB/T 50152—2012,混凝土结构试验方法标准[S].
GB/T 50152—2012,Standard for Test Method of Concrete Structures[S].
[16]陈思宇,朱杰江.装配式混凝土剪力墙平面外性能研究[J].混凝土与水泥制品,2019(9):76-78,83.
CHEN Si-yu,ZHU Jie-jiang.Study on Out-of-plane Performance of Prefabricated Concrete Shear Wall[J].China Concrete and Cement Products,2019(9):76-78,83.
[17]聂建国,王宇航.ABAQUS中混凝土本构模型用于模拟结构静力行为的比较研究[J].工程力学,2013,30(4):59-67,82.
NIE Jian-guo,WANG Yu-hang.Comparison Study of Constitutive Model of Concrete in ABAQUS for Static Analysis of Structures[J].Engineering Mechanics,2013,30(4):59-67,82.
[18]赵作周,周 剑,侯建群,等.上下层插筋连接预制混凝土空心模剪力墙有限元分析[J].工程力学,2017,34(1):117-129.
ZHAO Zuo-zhou,ZHOU Jian,HOU Jian-qun,et al.Finite Element Analysis of Shear Walls with Precast Concrete Hollow Moulds and Splice Rebar Connection Between the Upper and Lower floors[J].Engineering Mechanics,2017,34(1):117-129.
[19]ACI 318-11,Building Code Requirements for Structural Concrete and Commentary[S].
[20]JGJ 3—2010,高层建筑混凝土结构技术规程[S].
JGJ 3—2010,Technical Specification for Concrete Structures of Tall Building[S].
[21]GU Q,DONG G,KE Y,et al.Seismic Behavior of Precast Double-face Superposed Shear Walls with Horizontal Joints and Lap Spliced Vertical Reinforcement[J/OL].Structural Concrete,2020:1-16[2020-01-29].https://onlinelibrary.wiley.com/doi/abs/10.1002/suco.201900019.DOI:10.1002/suco.201900019.
[22]DB42/T 1483—2018,装配整体式混凝土叠合剪力墙结构技术规程[S].
DB42/T 1483—2018,Technical Specification for Monolithic Precast Superposed Concrete Shear Wall Structures[S].

相似文献/References:

[1]王 斌,张静玄,史庆轩,等.装配式混凝土剪力墙结构接缝连接研究进展[J].建筑科学与工程学报,2024,41(01):15.[doi:10.19815/j.jace.2023.05039]
　WANG Bin,ZHANG Jingxuan,SHI Qingxuan,et al.Research progress on joint connection of precast concrete shear wall structures[J].Journal of Architecture and Civil Engineering,2024,41(04):15.[doi:10.19815/j.jace.2023.05039]

备注/Memo

备注/Memo:
收稿日期:2019-11-01
基金项目:国家重点研发计划项目(2016YFC0305101); 武汉市城建局科技计划项目(201922)
作者简介:谷 倩(1972-),女,山东巨野人,教授,博士研究生导师,工学博士,E-mail:guqian@whut.edu.cn。
更新日期/Last Update: 2020-07-29