|本期目录/Table of Contents|

[1]靳幸福,吴晓鸣,陈安英,等.X形插板连接型钢结构梁柱节点受力性能[J].建筑科学与工程学报,2022,39(05):150-159.[doi:10.19815/j.jace.2022.05027]
　JIN Xing-fu,WU Xiao-ming,CHEN An-ying,et al.Mechanical Performance of Beam-column Connection Joints with X-shaped Inserted Plate in Steel Structure[J].Journal of Architecture and Civil Engineering,2022,39(05):150-159.[doi:10.19815/j.jace.2022.05027]
点击复制

X形插板连接型钢结构梁柱节点受力性能(PDF)
分享到：

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:
39卷
期数:
2022年05期
页码:
150-159
栏目:
结构工程
出版日期:
2022-09-30

文章信息/Info

Title:
Mechanical Performance of Beam-column Connection Joints with X-shaped Inserted Plate in Steel Structure
文章编号:
1673-2049(2022)05-0150-10
作者:
靳幸福1,2,吴晓鸣2,陈安英1,袁 睿1
(1. 合肥工业大学 土木与水利工程学院,安徽 合肥 230009; 2. 国网安徽省电力有限公司经济技术研究院,安徽 合肥 230061)
Author(s):
JIN Xing-fu1,2, WU Xiao-ming2, CHEN An-ying1, YUAN Rui1
(1. School of Civil Engineering, Hefei University of Technology, Hefei 230009, Anhui, China; 2. Economic Technology Research Institute, State Grid Anhui Electric Power Co., Ltd., Hefei 230061, Anhui, China)
关键词:
梁柱节点;  X形插板;  螺栓连接;  受力性能
Keywords:
beam-column connection joint;  X-shaped inserted plate;  bolted connection;  mechanical performance
分类号:
TU392.1
DOI:
10.19815/j.jace.2022.05027
文献标志码:
A
摘要:
为提高采用梁柱栓焊连接节点的变电站的安装施工效率,考虑变电站钢结构受力性能特点,提出在方钢管柱4个角部的45°方向焊接柱端钢板,钢梁端部焊接梁端钢板,然后通过高强螺栓连接梁端钢板和柱端钢板形成一种新型X形插板连接型钢结构梁柱装配式节点。设计了4个具有不同梁端钢板厚度和螺栓直径的节点模型并进行了受力性能试验。采用ABAQUS软件建立了节点模型并验证了模型的准确性,基于校核后的节点有限元模型分析了柱端钢板厚度和螺栓数量对节点受力性能的影响。结果表明:节点破坏主要发生在钢梁与梁端钢板焊缝连接处; 增加梁端钢板厚度和螺栓直径能显著提高节点的转动刚度和承载力,但仍为半刚性连接节点; 增加柱端钢板厚度和增加螺栓数量可以减小柱端钢板的损伤,但对梁端钢板损伤几乎不产生影响,同时增加螺栓数量的设计方式还可以提高节点的承载力。
Abstract:
In order to improve the installation and construction efficiency of the substation with beam-column bolt-welded joints, considering the mechanical performance characteristics of the steel structure of the substation, a new type of beam-column assembled joint with X-shaped inserted plate in steel structure was proposed to weld the steel plate at the column end in the 45 ° direction of the four corners of the square steel tube column, and the steel plate at the beam end was welded at the end of the steel beam, then the steel plate at the beam end and the steel plate at the column end were connected by high-strength bolts. Four joint models with different steel plate thicknesses and bolt diameters were designed and mechanical property tests were carried. The joint model was established by ABAQUS software and the accuracy of the model was verified. Based on the finite element model of the joint, the influence of the thickness of the steel plate at the column end and the number of bolts on the mechanical performance of the joint was analyzed. The results show that the joint failure mainly occurs at the weld joint between the steel beam and the steel plate at the beam end. Increasing the thickness of beam-end steel plate and the diameter of bolt can significantly improve the rotational stiffness and bearing capacity of the joint, and the joint is still semi-rigid joint. Increasing the thickness of the column end steel plate and the number of bolts can reduce the damage of the column end steel plate, but it has little effect on the damage of the beam end steel plate. At the same time, increasing the number of bolts can also improve the bearing capacity of the joint.

参考文献/References:

[1] 王新武.钢框架梁柱连接研究[D].武汉:武汉理工大学,2003.
WANG Xin-wu.Research on Beam-to-column Connections of Steel Frame[D].Wuhan:Wuhan University of Technology,2003.
[2]宗周红,林于东,林 杰.矩形钢管混凝土柱与钢梁半刚性节点的抗震性能试验研究[J].建筑结构学报,2004,25(6):29-36.
ZONG Zhou-hong,LIN Yu-dong,LIN Jie.Experimental Study on Seismic Performance of Rectangular Concrete-filled Steel Tube Column-to-steel Beam Semi-rigid Connections[J].Journal of Building Structures,2004,25(6):29-36.
[3]RICLES J M,PENG S W,LU L W.Seismic Behavior of Composite Concrete Filled Steel Tube Column-wide Flange Beam Moment Connections[J].Journal of Structural Engineering,2004,130(2):223-232.
[4]王先铁.新型方钢管混凝土柱-钢梁节点性能研究及抗震设计对策[D].西安:西安建筑科技大学,2007.
WANG Xian-tie.Behavior Research and Aseismic Design Criterion on New Type Connections of Concrete-filled Square Tubular Column and Steel Beam[D].Xi'an:Xi'an University of Architecture and Technology,2007.
[5]王 燕,马强强,杨怡亭,等.装配式钢结构H形钢梁-钢管柱连接节点的力学性能研究[J].建筑钢结构进展,2019,21(3):13-22.
WANG Yan,MA Qiang-qiang,YANG Yi-ting,et al.A Study on the Mechanical Behavior of H-shaped Beam-tubular Column Connections of Prefabricated Steel Structures[J].Progress in Steel Building Structures,2019,21(3):13-22.
[6]REZAEIAN A,JAMAL-OMIDI M,SHAHIDI F.Seismic Behavior of ConXL Rigid Connection in Box-columns Not Filled with Concrete[J].Journal of Constructional Steel Research,2014,97:79-104.
[7]SHAHIDI F,REZAEIAN A,JAMAL-OMIDI M,et al.Investigation of the ConXL Moment Connection Cyclic Behavior in Box Columns Without Filling Concrete with Different Arrangement of Collar Bolts[J].The Structural Design of Tall and Special Buildings,2015,24(5):317-350.
[8]卢俊凡.一种新型装配式钢结构节点的力学性能分析[D].西安:西安建筑科技大学,2016.
LU Jun-fan.Study on Mechanical Properties of a New Prefabricated Steel Structure Node[D].Xi'an:Xi'an University of Architecture and Technology,2016.
[9]李黎明,陈以一,李 宁,等.外套管式冷弯方钢管与H型钢梁连接节点的抗震性能[J].吉林大学学报(工学版),2010,40(1):67-71.
LI Li-ming,CHEN Yi-yi,LI Ning,et al.Seismic Performance of Outer-shell Connection of Cold-formed Square Tubular Column and H-shaped Steel Beam[J].Journal of Jilin University(Engineering and Technology Edition),2010,40(1):67-71.
[10]袁峥嵘.方钢管混凝土柱-钢梁T形件节点的性能研究[D].长沙:湖南大学,2013.
YUAN Zheng-rong. The Research on the Mechanical Performance of the Square Concrete Filled Steel Tube with T-stub Connector[D].Hunan:Hunan University,2013.
[11]张颜颜.新型梁柱装配式刚性节点的抗震性能研究[D].青岛:青岛理工大学,2013.
ZHANG Yan-yan.Research on Seismic Behavior of the New Assemble Beam-to-column Rigid Connections[D].Qingdao:Qingdao Technological University,2013.
[12]李自林,丁宏毅,薛 江.全螺栓连接隔板贯通的方钢管混凝土柱-钢梁节点抗震性能试验[J].土木工程学报,2014,47(7):63-69,78.
LI Zi-lin,DING Hong-yi,XUE Jiang.Experimental Study on Seismic Performance of All-bolt Connected and Diaphragm-through Joint Between Concrete-filled Square Steel Tubular Column and Steel Beam[J].China Civil Engineering Journal,2014,47(7):63-69,78.
[13]刘学春,王 丹,张爱林,等.法兰连接L形钢管混凝土柱-H型钢梁全螺栓节点抗震性能研究[J].建筑结构学报,2021,42(增1):98-109.
LIU Xue-chun,WANG Dan,ZHANG Ai-lin,et al.Study on Seismic Performance of a Full Bolted-assembly Connection for Flange-connected L-shaped CFST Column and H-shaped Steel Beam[J].Journal of Building Structures,2021,42(S1):98-109.
[14]NADER M N,ASTANEH-ASL A.Shaking Table Tests of Rigid,Semirigid,and Flexible Steel Frames[J].Journal of Structural Engineering,1996,122(6):589-596.
[15]MOURAD S,KOROL R M,GHOBARAH A.Design of Extended End-plate Connections for Hollow Section Columns[J].Canadian Journal of Civil Engineering,1996,23(1):277-286.
[16]王静峰,龚旭东,姜 涛,等.钢管混凝土边柱与组合梁端板连接的抗震试验研究[J].土木工程学报,2013,46(11):44-53.
WANG Jing-feng,GONG Xu-dong,JIANG Tao,et al.Experimental Study on Seismic Performance of Endplate Connections Between CFST External Columns and Composite Beams[J].China Civil Engineering Journal,2013,46(11):44-53.
[17]周 涛,王建国,完海鹰.方钢管混凝土柱-钢梁半刚性节点试验研究[J].工业建筑,2014,44(3):147-149,157.
ZHOU Tao,WANG Jian-guo,WAN Hai-ying.Experimental Study on Mechanical Behavior of the Beam-column Semi-rigid Joint of the Concrete-filled Square Tube[J].Industrial Construction,2014,44(3):147-149,157.
[18]王静峰,韩林海,郭水平.半刚性钢管混凝土框架端板节点试验研究及数值模拟[J].建筑结构学报,2010,31(增2):219-224.
WANG Jing-feng,HAN Lin-hai,GUO Shui-ping.Experimental Study and Numeral Analysis of End Plate Joints for Semi-rigid CFST Frames[J].Journal of Building Structures,2010,31(S2):219-224.
[19]王新武,孙海粟.T型钢连接钢框架抗震性能试验研究[J].钢结构,2016,31(6):7-10.
WANG Xin-wu,SUN Hai-su.Experimental Study of the Seismic Performance of Steel Frame with T-stub Steel Connection[J].Steel Construction,2016,31(6):7-10.
[20]徐怡红.T型钢半刚性链接节点的非线性性能研究[D].杭州:浙江工业大学,2010.
XU Yi-hong.Research on Nonlinear Behavior of T-stub Semi-rigid Connections[D].Hangzhou:Zhejiang University of Technology,2010.
[21]施 刚.钢框架半刚性端板连接的静力和抗震性能研究[D].北京:清华大学,2004.
SHI Gang.Static and Seismic Behavior of Semirigid End-plate Connections in Steel Frames[D].Beijing:Tsinghua University,2004.
[22]阎红伟,完海鹰,程晓艳,等.高层钢结构双腹板、顶底角钢半刚性连接的研究[J].合肥工业大学学报(自然科学版),2003,26(3):359-362.
YAN Hong-wei,WAN Hai-ying,CHENG Xiao-yan, et al.Static Behavior of Top and Seat Angels with Double Web Angels Being Connected Semi-rigidly[J].Journal of Heifei University of Technology(Natural Science),2003,26(3):359-362.
[23]李志彩.基于VFIFE的半刚性连接钢框架抗连续倒塌性能研究[D].大连:大连理工大学,2019.
LI Zhi-cai.Progressive Collapse Studies of Semi-rigid Connected Steel Frames Based on VFIFE Method[D].Dalian:Dalian University of Technology,2019.
[24]金属材料拉伸试验 第1部分:室温试验方法:GB/T 228.1—2010[S].北京:中国标准出版社,2010.
Metallic Materials — Tensile Testing — Part 1:Method of Test at Room Temperature:GB/T 228.1—2010[S].Beijing:Standards Press of China,2010.
[25]Design of Steel Structures.Part 1-8:Design of Joints:EN 1993-1-8:2005[S].Brussels:CEN,2005.
[26]钢结构设计规范:GB 50017—2003[S].北京:中国计划出版社,2003.
Code for Design of Steel Structures:GB 50017—2003[S].Beijing:China Planning Press,2003.

相似文献/References:

[1]成 博,武振宇.组装式钢货架螺栓连接梁柱节点试验[J].建筑科学与工程学报,2013,30(03):71.
　]CHENG Bo,WU Zhen-yu.Experiment on Bolted Beam-to-column Connections in Assembled Steel Storage Racks[J].Journal of Architecture and Civil Engineering,2013,30(05):71.
[2]吴从晓,周 云,赖伟山,等.现浇与预制装配式混凝土框架节点抗震性能试验[J].建筑科学与工程学报,2015,32(03):60.
　WU Cong-xiao,ZHOU Yun,LAI Wei-shan,et al.Experiment on Seismic Performance of Cast-in-situ andPrefabricated Concrete Frame Structure Joints[J].Journal of Architecture and Civil Engineering,2015,32(05):60.
[3]王 燕,杨 帆.对接焊缝构造形式对高强钢梁柱节点断裂性能的影响[J].建筑科学与工程学报,2018,35(04):45.
　WANG Yan,YANG Fan.Effect of Butt Weld Construction on Fracture Properties of High Strength Steel Beam-column Joints[J].Journal of Architecture and Civil Engineering,2018,35(05):45.
[4]张玉芬,周金富,朱 戈,等.高轴压比下复式钢管混凝土柱钢梁连接节点抗震性能试验[J].建筑科学与工程学报,2018,35(06):57.
　ZHANG Yu-fen,ZHOU Jin-fu,ZHU Ge,et al.Experiment on Seismic Behavior of Joint Between Composite CFST Column and Steel Beam Under High Axial Compression Ratio[J].Journal of Architecture and Civil Engineering,2018,35(05):57.
[5]李晓东,闫胤积.蜂窝式可替换塑性铰梁柱节点力学性能[J].建筑科学与工程学报,2021,38(01):90.[doi:10.19815/j.jace.2020.04017]
　LI Xiao-dong,YAN Yin-ji.Mechanical Behavior of Honeycombed Replaceable Plastic Hinged Beam-column Joints[J].Journal of Architecture and Civil Engineering,2021,38(05):90.[doi:10.19815/j.jace.2020.04017]
[6]梁书亭,杨 简,朱筱俊,等.矩形钢管混凝土柱-混凝土梁搭接式节点抗震性能研究[J].建筑科学与工程学报,2021,38(03):13.[doi:10.19815/j.jace.2019.01043]
　LIANG Shu-ting,YANG Jian,ZHU Xiao-jun,et al.Research on Seismic Performance of Lap Connection Between Rectangular CFST Column and RC Beam[J].Journal of Architecture and Civil Engineering,2021,38(05):13.[doi:10.19815/j.jace.2019.01043]
[7]郑 宏,尚永芳,苏耀烜,等.带可更换梁段的翼缘削弱型节点滞回性能研究[J].建筑科学与工程学报,2022,39(06):74.[doi:10.19815/j.jace.2021.08011]
　ZHENG Hong,SHANG Yong-fang,SU Yao-xuan,et al.Research on Hysteretic Behavior of Flange Weakened Joint with Replaceable Beam Section[J].Journal of Architecture and Civil Engineering,2022,39(05):74.[doi:10.19815/j.jace.2021.08011]
[8]丁发兴,罗开源,吕 飞,等.钢管混凝土柱-钢梁外加强环螺栓连接节点抗震性能有限元分析[J].建筑科学与工程学报,2024,41(04):10.[doi:10.19815/j.jace.2023.02095]
　DING Faxing,LUO Kaiyuan,LYU Fei,et al.Finite element analysis of seismic performance of concrete-filled steel tubular column-steel beam with external reinforcement ring bolted joint[J].Journal of Architecture and Civil Engineering,2024,41(05):10.[doi:10.19815/j.jace.2023.02095]

备注/Memo

备注/Memo:
收稿日期:2022-05-09
基金项目:安徽高校协同创新项目(GXXT-2019-005)
作者简介:靳幸福(1986-),男,河南周口人,工程师,工学硕士,E-mail:sailingtype@163.com。
通信作者:陈安英(1981-),男,安徽和县人,副教授,工学博士,E-mail:anyingchen@hfut.edu.cn。
更新日期/Last Update: 2022-09-30