«上一篇/Previous Article|本期目录/Table of Contents|下一篇/Next Article»

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:

26卷

期数:

2009年02期

页码:

103-108

栏目:

出版日期:

2009-06-20

文章信息/Info

Title:

Analysis for Buckling Behavior of Multi-step Rectangular Section Compressive Columns with Arbitrary Number of Side-cracks

作者:

周利

五邑大学土木建筑系,广东江门529020

Author(s):

ZHOU Li

Department of Civil Engineering, Wuyi University, Jiangmen 529020, Guangdong, China

关键词:

屈曲行为;  多裂纹;  矩形截面;  阶梯柱;  平衡路径模型;  横向干扰挠度

Keywords:

buckling behavior;  arbitrary number of crack;  rectangular section;  multi-step column;  equilibrium path model;  lateral interfering deflection

分类号:

TU375.1

DOI:

-

文献标志码:

A

摘要:

采用Rayleigh-Ritz能量法推导了带多个边裂纹的矩形截面阶梯柱弹性后屈曲过程的控制方程,提出了一个带裂纹轴压柱弹性屈曲全过程的平衡路径模型,同时更正了相关文献中认为裂纹对柱的临界力肯定有影响的错误结论,并针对某一简支阶梯柱,通过数值计算得到了4种裂纹状态下的屈曲前后的平衡路径曲线。分析结果表明:当横向干扰挠度大于一定程度时,裂纹才对轴压柱的临界荷载有影响; 当横向干扰挠度小于一定程度时,裂纹只对轴压柱的后屈曲过程有影响,而对临界荷载无影响。

Abstract:

The governing equation for the post-buckling process of a multi-step rectangular section compressive column with arbitrary number of side-cracks was derived by using Rayleigh-Ritz energy method. Moreover, an analytical model of the equilibrium path of whole buckling process was suggested for the cracked compressive column, where the crack closure and fracture condition were considered. Thus the unreasonable conclusions in some relevant references that cracks had certainly effects on critical load were corrected. As an example, the equilibrium path curves of four states of cracks were obtained numerically for a simply supported three-steps columns. The analytical results show that when an excessive lateral interfering deflection appears, the cracks will have effects on critical load; when the lateral interfering deflection is small, the cracks will have no effects on critical load but have effects on post-buckling process.

参考文献/References:

[1] DIMAROGONAS A D.Vibration of Cracked Structures-a State of the Art Review[J].Engineering Fracture Mechanics,1996,55(5):831-857.
[2]OKAMURA H,LIU H W,CHU C S,et al.A Cracked Column Under Compression[J].Engineering Fracture Mechanics,1969,1(1):547-564.
[3]ISMAIL F,IBRAHIM A,MARTIN H R.Identification of Fatigue Cracks from Vibration Testing[J].Journal of Sound and Vibration,1990,140(2):305-317.
[4]KRAWCZUK M,OSTACHOWICZ W,ZAK A.Dynamics of Cracked Composite Material Structures[J].Computational Mechanics,1997,20(1/2):79-83.
[5]TAKAHASHI H.Vibration and Stability of Non-uniform Cracked Timoshenko Beam Subjected to Follower Force[J].Computers & Structures,1999,71(5):585-591.
[6]ANIFANTIS A,DIMAROGONAS A D.Stability of Columns with a Single Crack Subjected to Follower and Vertical Loads[J].International Journal of Solids and Structures,1983,19(4):281-291.
[7]NIKPOUR K.Buckling of Cracked Composite Columns[J].International Journal of Solids and Structures,1990,26(12):1371-1386.
[8]WANG Q,CHASE J G.Buckling Analysis of Cracked Column Structures and Piezoelectric-based Repair and Enhancement of Axial Load Capacity[J].International Journal of Structural Stability and Dynamics,2003,3(1):17-34.
[9]SHIFRIN E I,RUOTOLO R.Nature Frequencies of a Beam with an Arbitrary Number of Cracks[J].Journal of Sound and Vibration,1999,222(3):409-423.
[10]LI Q S.Class of Exact Solutions for Buckling of Multistep Nonuniform Columns with an Arbitrary Number of Cracks Subjected to Concentrated and Distributed Axial Loads[J].Int Eng Sci,2003,41:569-586.
[11]LI Q S.Vibratory Characteristics of Timoshenko Beam with an Arbitrary Number of Cracks[J].Journal of Engineering Mechanics,2003,129(11):1355-1359.
[12]GOUNARIS G,DIMARAGONAS A D.A Finite Element of a Cracked Prismatic Beam for Structural Analysis[J].Comput Struct,1988,28(3):309-313.
[13]VIOLA E,NOBILE L,FEDERICI L.Formulation of Cracked Beam Element for Structural Analysis[J].Journal of Engineering Mechanics,2002,128(2):220-230.

相似文献/References:

备注/Memo

备注/Memo:

收稿日期:2009-03-03
基金项目:广东省自然科学基金项目(4011764)
作者简介:周 利(1961-),男,陕西西安人,教授,工学博士,E-mail:lee61cn@yahoo.com.cn。

常用功能

更新日期/Last Update: 2009-06-20