|本期目录/Table of Contents|

[1]张军锋,葛耀君,赵林.双曲冷却塔结构规范风荷载标准值对比[J].建筑科学与工程学报,2011,28(02):52-61.
 ZHANG Jun-feng,GE Yao-jun,ZHAO Lin.Comparisons of Nominal Values of Wind Loads on Hyperboloidal Cooling Towers[J].Journal of Architecture and Civil Engineering,2011,28(02):52-61.
点击复制

双曲冷却塔结构规范风荷载标准值对比(PDF)
分享到:

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:
28卷
期数:
2011年02期
页码:
52-61
栏目:
出版日期:
2011-06-20

文章信息/Info

Title:
Comparisons of Nominal Values of Wind Loads on Hyperboloidal Cooling Towers
作者:
张军锋葛耀君赵林
同济大学 土木工程防灾国家重点实验室,上海 200092
Author(s):
ZHANG Jun-feng GE Yao-jun ZHAO Lin
State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University, Shanghai 200092, China
关键词:
双曲冷却塔 规范 风荷载标准值 脉动效应系数 干扰效应系数
Keywords:
hyperboloidal cooling tower code nominal value of wind load gust effect factor interference effect factor
分类号:
TU312.1
DOI:
-
文献标志码:
A
摘要:
以参数分析为基础,对中、英、德双曲冷却塔结构设计规范风荷载标准值的取值原则和计算思路进行了对比,研究了基本风速、风剖面、内外表面静风风压环向分布、脉动效应系数、干扰效应系数等参数的取值和相互影响,并介绍了中、英、德双曲冷却塔设计规范与其荷载规范相关条款的差异; 以3座不同高度的双曲冷却塔为例,对比分析了中、英、德规范的脉动效应系数取值,并对1座双曲冷却塔分别采用中、英、德规范计算等效风荷载标准值及其荷载效应。结果表明:受设计基本风压剖面和脉动效应系数控制,中、德规范的荷载标准值剖面较为接近,但明显小于英国规范; 受荷载标准值剖面和环向压力分布影响,塔筒中下部区域子午向拉力和环向弯矩的极值分别对应于英、德规范,而喉部位置英国规范得到的子午向拉力和环向弯矩的极值分别为中、德规范的1.4倍和1.1倍。
Abstract:
Based on the comparative study of parameters, DL/T 5339—2006(China), BS 4485-4:1996(British), VGB-R 610Ue:2005(Germany)were selected as the representative codes and the calculation principles and methods of nominal value of wind load on hyperboloidal cooling tower were surveyed. The analysis considered the definition of basic wind velocity, wind profile, internal and external static wind pressure latitude distribution, gust effect factor, interference effect factor and also the interaction among them. Three representative hyperboloidal cooling towers were taken as examples to assess the gust effect factor from different codes, and a detail example was presented to illustrate the overall comparison of the nominal value of equivalent static wind load and the load effects. Results show that the nominal value profile of load of DL and VGB are close but much less than BS owning to differences from the design basic wind pressure profile and the gust effect factor. The meridian tension and latitude moment extreme values in middle-lower part of the shell originate from BS and VGB respectively; on the other hand, the meridian tension and latitude moment extreme values from BS are 1.4 times and 1.1 times of those from DL and VGB.

参考文献/References:

[1] 武际可.大型冷却塔结构分析的回顾与展望[J].力学与实践,1996,18(6):1-5. WU Ji-ke.Review and Expectation of Structure An-alysis for Large Cooling Tower[J].Mechanics and Practice,1996,18(6):1-5.
[2]MUNGAN I,WITTEK U.Natural Draught Cooling Towers[M].London:Balkema A A,2004.
[3]GB/T 50102—2003,工业循环水冷却设计规范[S]. GB/T 50102—2003,Code for Design of Cooling for Industrial Recycled Water[S].
[4]DL/T 5339—2006,火力发电厂水工设计规范[S]. DL/T 5339—2006,Technical Specification for Hydraulic Design of Thermal Power Plant[S].
[5]BS 4485-4:1996,Water Cooling Towers.Part 4:Code of Practice for Structural Design and Construction[S].
[6]VGB-R 610Ue:2005,Structural Design of Cooling Towers[S].
[7]GB 50009—2001,建筑结构荷载规范[S]. GB 50009—2001,Load Code for Design of Building Structures[S].
[8]同济大学土木工程防灾国家重点实验室.印度TALWANDI煤电站冷却塔抗风抗震性能研究报告[R].上海:同济大学,2010. SLDRCE of Tongji University.Report of Seismic and Wind Resistance Performance for Cooling Tower in TALWANDI Power Plant[R].Shanghai:Tongji University,2010.
[9]BS 6399-2:1997,Loading for Buildings.Part 2:Code of Practice for Wind Loads[S].
[10]DIN 1055-4:2005,Action on Structures.Part 4:Wind Loads[S].
[11]ANSI ASCE 7-05,Minimum Design Loads for Buildings and Other Structures[S].
[12]张相庭.结构风工程:理论·规范·实践[M].北京:中国建筑工业出版社,2006. ZHANG Xiang-ting.Wind Engineering of Structures:Theory,Specification and Practice[M].Beijing:China Architecture & Building Press,2006.
[13]孙天风,周良茂.无肋双曲线型冷却塔风压分布的全尺寸测量和风洞研究[J].空气动力学学报,1983(4):68-76. SUN Tian-feng,ZHOU Liang-mao.A Full-scale and Wind-tunnel Study of Wind Pressure Distribution Around a Ribless Hyperbolic Cooling Tower[J].Acta Aerodynamica Sinica,1983(4):68-76.
[14]HARNACH R,NIEMANN H J.Influence of Realistic Mean Wind Loads on the Static Response and the Design of High Cooling Towers[J].Engineering Structures,1980,2(1):27-34.
[15]ARMITT J.Wind Loading on Cooling Towers[J].Journal of the Structural Division,1980,106(3):623-641.
[16]NIEMANN H J,KOPPER H D.Influence of Adjacent Buildings on Wind Effects on Cooling Towers[J].Engineering Structures,1998,20(10):874-880.
[17]同济大学土木工程防灾国家重点实验室.江苏徐州电厂排烟冷却塔抗风抗震性能研究初步试验研究报告[R].上海:同济大学,2009. SLDRCE of Tongji University.Preliminary Report of Wind Tunnel Test for Cooling Tower in Xuzhou Power Plant of Jiangsu Province[R].Shanghai:Tongji University,2009.

相似文献/References:

[1]魏巍巍,贡金鑫,田磊.钢筋混凝土板受冲切承载力对比分析[J].建筑科学与工程学报,2010,27(04):44.
 WEI Wei-wei,GONG Jin-xin,TIAN Lei.Comparative Analysis of Punching Shear Capacity for Reinforced Concrete Slabs[J].Journal of Architecture and Civil Engineering,2010,27(02):44.
[2]张军锋,葛耀君,赵林.双曲冷却塔结构规范静风稳定对比[J].建筑科学与工程学报,2011,28(03):62.
 ZHANG Jun-feng,GE Yao-jun,ZHAO Lin.Comparison of Aerostatic Stability of Hyperboloidal Cooling Tower Structures in Different Codes[J].Journal of Architecture and Civil Engineering,2011,28(02):62.

备注/Memo

备注/Memo:
收稿日期:2011-01-16
基金项目:国家自然科学基金项目(50978203); 科技部重大科技项目(2008ZX06004-001)
作者简介:张军锋(1983-),男,河南平顶山人,工学博士研究生,E-mail:brilliantshine@163.com。
更新日期/Last Update: 2011-06-20