|本期目录/Table of Contents|

[1]苟海刚,郑辉晓,卢林枫.箱形节点域工字形柱弱轴盖板加强连接的设计方法[J].建筑科学与工程学报,2018,35(01):77-86.
 GOU Hai-gang,ZHENG Hui-xiao,LU Lin-feng.Design Method of Cover-plate Reinforced Connection of I-section Column for Weak Axis with Box Joint Region[J].Journal of Architecture and Civil Engineering,2018,35(01):77-86.
点击复制

箱形节点域工字形柱弱轴盖板加强连接的设计方法(PDF)
分享到:

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:
35卷
期数:
2018年01期
页码:
77-86
栏目:
出版日期:
2018-01-30

文章信息/Info

Title:
Design Method of Cover-plate Reinforced Connection of I-section Column for Weak Axis with Box Joint Region
作者:
苟海刚郑辉晓卢林枫
长安大学建筑工程学院
Author(s):
GOU Hai-gang, ZHENG Hui-xiao, LU Lin-feng
School of Civil Engineering, Chang’an University
关键词:
钢框架弱轴盖板连接设计方法力学性能
Keywords:
steel frame weak axis cover-plate connection design method mechanical behavior
分类号:
-
DOI:
-
文献标志码:
A
摘要:
为了实现“高延性-高弹性承载力”的抗震设计思路和推广盖板加强型连接在工字形柱钢框架中的应用,提出了一种适用于箱形节点域工字形柱弱轴盖板加强连接的设计方法和设计步骤。通过一个多层钢框架工程实例的设计,验证了所提盖板加强型连接设计方法的可靠性。采用ABAQUS有限元软件对实际工程的内框架十字形节点在循环荷载作用下的力学性能进行分析,研究了节点的破坏形态、滞回曲线、骨架曲线、刚度退化曲线、延性系数和耗能能力。结果表明:新型箱形节点域工字形柱弱轴盖板加强连接的设计方法合理、可靠,应用该方法设计的工字形柱弱轴连接节点能够实现梁上“塑性铰”外移,节点具有较强的塑性变形能力和耗能能力,能够满足抗震规范中“强柱弱梁”和“强节点弱构件”的抗震设计理念。
Abstract:
In order to realize the seismic design idea of “high ductility and high bearing capacity” and to promote the application of cover-plate reinforced connection in I-section column steel frame, the design method and step about the cover-plate reinforced connection with box joint region of I-section column for weak axis were proposed. The reliability of the design method about cover-plate reinforced connection was verified by a practical multi-storey steel frame engineering example. The mechanical behavior of internal frame cross-shaped joint under cyclic loading in the actual engineering was analyzed by using finite element software ABAQUS. The failure pattern, hysteresis curve, skeleton curve, stiffness degradation curve, ductility factor, and energy dissipation performance were analyzed. The results show that the design method of the new cover-plate reinforced connection with box joint region of I-section column for weak axis was reasonable and reliable. The joint of I-shaped column for weak axis designed by the method can effectively move the beam plastic hinge away. The joint with the new connection has strong plastic deformation capacity and energy dissipation capacity, and can achieve the seismic design concept of “strong column and weak beam” and “strong joint and weak component” in the seismic code.

参考文献/References:

相似文献/References:

[1]郑宏,潘天久,卫磊.深梁填充钢框架的发展与研究进展 [J].建筑科学与工程学报,2013,30(04):32.
 ZHENG Hong,PAN Tian-jiu,WEI Lei.Development and Research Progress of Steel Frame Infilled with Deep Beam[J].Journal of Architecture and Civil Engineering,2013,30(01):32.
[2]周天华,吴函恒,白亮,等.钢框架-预制混凝土抗侧力墙装配式结构体系[J].建筑科学与工程学报,2013,30(03):1.
 ZHOU Tian-hua,WU Han-heng,BAI Liang,et al.Fabricated Structural System of Steel Frame-prefabricated Concrete Lateral Resistance Wall[J].Journal of Architecture and Civil Engineering,2013,30(01):1.
[3]徐忠根,梁广贤,邓长根.定位轴线存在偏差的外传力钢框架节点传力板参数分析[J].建筑科学与工程学报,2015,32(02):42.
 XU Zhong-gen,LIANG Guang-xian,DENG Chang-gen.Parameter Analysis of Force-transforming Plates in Outside Steel Frame Joints with Location Axis Deviations[J].Journal of Architecture and Civil Engineering,2015,32(01):42.
[4]吴函恒,秦沛远,陈军武,等.水平荷载作用下钢框架预制混凝土抗侧力墙体装配式结构的简化计算方法[J].建筑科学与工程学报,2016,33(03):86.
 WU Han-heng,QIN Pei-yuan,CHEN Jun-wu,et al.Simplified Calculation Method of Steel Frame-prefabricated Concrete Lateral Force Resisting Wall Structures Under Lateral Load[J].Journal of Architecture and Civil Engineering,2016,33(01):86.
[5]郁有升,梅 灿,雷 鸣.内嵌CCA板填充墙对钢框架结构受力性能的影响[J].建筑科学与工程学报,2018,35(03):63.
 YU You-sheng,MEI Can,LEI Ming.Influence of CCA Plate Infill Wall on Mechanical Behavior of Steel Frame Structures[J].Journal of Architecture and Civil Engineering,2018,35(01):63.
[6]韩明岚,王 帅,牟 政,等.延性节点钢框架结构的抗震性能分析[J].建筑科学与工程学报,2018,35(04):72.
 HAN Ming-lan,WANG Shuai,MOU Zheng,et al.Seismic Performance Analysis of Steel Frame Structure with Ductile Connections[J].Journal of Architecture and Civil Engineering,2018,35(01):72.
[7]郑 宏,方贤禄,苏耀烜,等.局部可更换钢框架梁-柱节点受力性能研究[J].建筑科学与工程学报,2021,38(02):47.[doi:10.19815/j.jace.2020.07030]
 ZHENG Hong,FANG Xian-lu,SU Yao-xuan,et al.Study on Mechanical Behavior of Partially Replaceable Steel Frame Beam-column Joints[J].Journal of Architecture and Civil Engineering,2021,38(01):47.[doi:10.19815/j.jace.2020.07030]
[8]卢林枫,刘子龙,李成成,等.节点域箱形加强式工字形柱弱轴连接钢框架的力学性能和经济性分析[J].建筑科学与工程学报,2015,32(03):52.
 LU Lin-feng,LIU Zi-long,LI Cheng-cheng,et al.Steel Frame Mechanical Properties and Economical Efficiency Analysis of Box Strengthenjoint Region Connection of I-section Column for Weak Axis[J].Journal of Architecture and Civil Engineering,2015,32(01):52.

备注/Memo

备注/Memo:
更新日期/Last Update: 2018-02-01