«上一篇/Previous Article|本期目录/Table of Contents|下一篇/Next Article»

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:

36卷

期数:

2019年03期

页码:

74-82

栏目:

出版日期:

2019-05-22

文章信息/Info

Title:

Seismic Behavior of Unbonded Prestressed Tendon Precast Shear Walls with Energy Dissipation Angle Steel

文章编号:

1673-2049(2019)03-0074-09

作者:

黄 远^1,2,易展辉^1,2

(1. 湖南大学 工程结构损伤诊断湖南省重点实验室,湖南 长沙 410082; 2. 湖南大学 土木工程学院,湖南 长沙 410082)

Author(s):

HUANG Yuan^1,2, YI Zhan-hui ^1,2

(1. Hunan Provincial Key Laboratory on Damage Diagnosis for Engineering Structures, Hunan University, Changsha 410082, Hunan, China; 2. College of Civil Engineering, Hunan University, Changsha 410082, Hunan, China))

关键词:

无黏结预应力;  预制剪力墙;  耗能角钢;  抗震性能

Keywords:

unbonded prestress;  precast shear;  energy dissipation angle steel;  seismic performance

分类号:

TU378.1

DOI:

-

文献标志码:

A

摘要:

改进了传统无黏结预应力(UPT)装配式墙体的连接构造方式,在墙趾处设置耗能角钢以提升构件的抗侧承载能力和耗能能力等抗震性能。利用有限元软件MSC.Marc对带耗能角钢UPT预制剪力墙进行单元建模,通过已有耗能角钢的试验数据和无黏结预应力墙体验证有限元模型中无黏结预应力筋、耗能角钢本构模型和接触等参数设置的准确性和合理性。通过参数分析研究了耗能角钢张拉控制应力、预应力筋位置、轴压比、参数设置及墙体高度对带耗能角钢UPT墙体延性及水平抗侧承载力的影响。结果表明:与不带耗能角钢UPT墙体相比,带耗能角钢UPT墙体的抗侧承载能力有明显提高,设置耗能角钢能有效降低预应力筋最大应力; 随着耗能角钢厚度的增加或者耗能角钢竖向水平群螺栓至角钢外边缘距离的减小,墙体的抗侧承载力将增大; 预应力筋偏心率较小时墙体延性较好,较大的偏心率虽然能够提高墙体的抗侧承载能力,但将大幅降低墙体的延性,不利于改善墙体抗震性能。

Abstract:

The connection details of traditional unbonded prestressing tendon(UPT)prefabricated walls were improved. The energy dissipation angle steel was installed at the toe of the wall to improve the lateral bearing capacity and energy dissipation capacity of the members. The element model of UPT prefabricated shear wall with energy dissipation angle steel was built using finite element software MSC. Marc. The accuracy and rationality of parameters setting in finite element model, such as unbonded prestressed tendons, energy dissipation angle steel constitutive model and contact, were verified by experimental data of energy dissipation angle steel and unbonded prestressed wall. The effects of tension control stress, position of prestressing tendon, axial compression ratio, parameter setting and wall height on ductility and lateral bearing capacity of UPT wall with energy dissipation angle steel were studied by parameter analysis. The results show that compared with the UPT wall without the energy dissipation angle steel, the lateral bearing capacity of UPT wall with angle steel is significantly improved. The steel angle can effectively reduce the maximum stress of prestressed tendons. With the increase of the thickness of the energy dissipation angle steel or the decrease of the distance between the vertical horizontal group bolts and the outer edge of angle steel, the lateral bearing capacity of the wall will increase. The eccentricity ratio of prestressing tendons is smaller and the ductility is better. The larger eccentricity ratio can improve the lateral bearing capacity of the wall, but it will greatly reduce the ductility of the wall, which is not conducive to improving the seismic performance of the wall.

参考文献/References:

[1] 蒋欢军,刘其舟.可恢复功能剪力墙结构研究进展[J].振动与冲击,2015,34(7):51-58.
JIANG Huan-jun,LIU Qi-zhou.State-of-the-art of the Research Advances on Resilient Shear Walls[J].Journal of Vibration and Shock,2015,34(7):51-58.
[2]马 昕,吕西林.软钢阻尼器对自复位剪力墙性能影响研究[J].结构工程师,2013,29(4):63-69.
MA Xin,LU Xi-lin.Effects of the Mild Steel Damper on the Self-centering Wall Performance[J].Structural Engineers,2013,29(4):63-69.
[3]KURAMA Y,PESSIKI S,SAUSE R,et al.Seismic Behavior and Design of Unbonded Post-tensioned Precast Concrete Walls[J].PCI Journal,1999,38(3):72-93.
[4]HENRY R.Self-centering Precast Concrete Walls for Buildings in Regions with Low to High Seismicity[D].Auckland:University of Auckland,2011.
[5]RESTREPO J I,RAHMAN A.Seismic Performance of Self-centering Structural Walls Incorporating Energy Dissipators[J].Journal of Structural Engineering,2007,133(11):1560-1570.
[6]党像梁,吕西林,周 颖.底部开水平缝摇摆剪力墙抗震性能分析[J].地震工程与工程振动,2013,33(5):182-189.
DANG Xiang-liang,LU Xi-lin,ZHOU Ying.Study on Seismic Performance of a Rocking Wall with Bottom Horizontal Slits[J].Journal of Earthquake Engineering and Engineering Vibration,2013,33(5):182-189.
[7]吴 浩,吕西林,蒋欢军,等.预应力预制混凝土剪力墙抗震性能试验研究[J].建筑结构学报,2016,37(5):208-217.
WU Hao,LU Xi-lin,JIANG Huan-jun,et al.Experimental Study on Seismic Performance of Prestressed Precast Concrete Shear Walls[J].Journal of Building Structures,2016,37(5):208-217.
[8]蒋 路.带缝钢板剪力墙应用技术分析[J].建筑科学与工程学报,2012,29(2):118-122.
JIANG LU.Analysis of Application Techniques of Steel Plate Shear Wall with Slits[J].Journal of Architecture and Civil Engineering,2012,29(2):118-122.
[9]过镇海,时旭东.钢筋混凝土原理和分析[M].北京:清华大学出版社,2003.
GUO Zhen-hai,SHI Xu-dong.Reinforced Concrete Theory and Analyse[M].Beijing:Tsinghua University Press,2003.
[10]汪训流,叶列平,陆新征.预应力筋粘结形式对框架复位性能的影响[J].建筑结构,2008,38(8):57-60.
WANG Xun-liu,YE Lie-ping,LU Xin-zheng.Influence by Bonding Styles of Prestressed Strands/Steels on Re-centering Behavior of PC Frames[J].Building Structure,2008,38(8):57-60.
[11]蔡小宁,孟少平,孙巍巍,等.顶底角钢连接半刚性钢结构抗震性能数值分析[J].工程力学,2012,29(7):124-129,146.
CAI Xiao-ning,MENG Shao-ping,SUN Wei-wei,et al.Numerical Analysis for Seismic Behavior of Semi-rigid Steel Beam-to-column Connection with Top-and-seat Angles[J].Engineering Mechanics,2012,29(7):124-129,146.
[12]GARLOCK M M,RICLES J M,SAUSE R.Cyclic Load Tests and Analysis of Bolted Top-and-seat Angle Connections[J].Journal of Structural Engineering,2003,129(12):1615-1625.
[13]KISHI N,CHEN W F.Moment-rotation Relations of Semirigid Connections with Angles[J].Journal of Structural Engineering,1990,116(7):1813-1834.
[14]VIDJEAPRIYA R,JAYA K P.Experimental Study on Two Simple Mechanical Precast Beam-column Connections Under Reverse Cyclic Loading[J].Journal of Performance of Constructed Facilities,2013,27(4):402-414.
[15]冯 鹏,强翰霖,叶列平.材料、构件、结构的“屈服点”定义与讨论[J].工程力学,2017,34(3):36-46.
FENG Peng,QIANG Han-lin,YE Lie-ping.Discussion and Definition on Yield Points of Materials Members and Structures[J].Engineering Mechanics,2017,34(3):36-46.
[16]JGJ 369—2016,预应力混凝土结构设计规范[S].
JGJ 369—2016,Code for Design of Prestressed Concrete Structures[S].
[17]刘家彬,陈云钢,郭正兴,等.竖向新型连接装配式剪力墙抗震性能试验研究[J].湖南大学学报:自然科学版,2014,41(4):16-24.
LIU Jia-bin,CHEN Yun-gang,GUO Zheng-xing,et al.Test on the Seismic Performance of Precast Shear Wall with Vertical Reinforcement Lapping in Pore-forming on Steel Plate[J].Journal of Hunan University:Natural Sciences,2014,41(4):16-24.
[18]ERKMEN B,SCHULTZ A E.Self-centering Behavior of Unbonded Precast Concrete Shear Walls[J].Earthquake Resistant Engineering Structures,2007,93:185-194.
[19]劳晓春,韩小雷.延性RC剪力墙构件的性能指标限值[J].工程力学,2011,28(9):157-164.
LAO Xiao-chun,HAN Xiao-lei.The Performance Index Limits for Ductile RC Shear Wall Components[J].Engineering Mechanics,2011,28(9):157-164.

相似文献/References:

备注/Memo

备注/Memo:

收稿日期:2018-10-26
基金项目:国家自然科学基金项目(51478174)
作者简介:黄 远(1982-),男,湖南长沙人,副教授,工学博士,E-mail:huangy@hnu.edu.cn。

常用功能

更新日期/Last Update: 2019-05-23