|本期目录/Table of Contents|

[1]袁涛涛,隋 璐,吴函恒,等.钢带加强螺钉孔型冷弯型钢组合墙体抗震性能[J].建筑科学与工程学报,2021,38(03):43-52.[doi:10.19815/j.jace.2020.07001]
　YUAN Tao-tao,SUI Lu,WU Han-heng,et al.Seismic Behavior of Cold-formed Steel Framing Walls with Strengthened Steel Strips in Screw Holes[J].Journal of Architecture and Civil Engineering,2021,38(03):43-52.[doi:10.19815/j.jace.2020.07001]
点击复制

钢带加强螺钉孔型冷弯型钢组合墙体抗震性能(PDF)
分享到：

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:
38卷
期数:
2021年03期
页码:
43-52
栏目:
出版日期:
2021-05-25

文章信息/Info

Title:
Seismic Behavior of Cold-formed Steel Framing Walls with Strengthened Steel Strips in Screw Holes
作者:
袁涛涛1,隋 璐2,吴函恒2,续丛丛2
(1. 中铁第一勘察设计院集团有限公司,陕西 西安 710043; 2. 长安大学 建筑工程学院,陕西 西安 710061)
Author(s):
YUAN Tao-tao1, SUI Lu2, WU Han-heng2, XU Cong-cong2
(1. China Railway First Survey and Design Institute Group Co.,Ltd., Xi'an 710043, Shaanxi, China; 2. School of Civil Engineering, Chang'an University, Xi'an 710061, Shaanxi, China)
关键词:
冷弯型钢组合墙体;  加强式钢带;  抗震性能;  低周反复加载试验;  自攻螺钉
Keywords:
cold-formed steel framing wall;  strengthened steel strip;  seismic behavior;  low cyclic loading test;  screw hole
分类号:
TU392.5
DOI:
10.19815/j.jace.2020.07001
文献标志码:
A
摘要:
为研究钢带加强螺钉孔对冷弯型钢组合墙体抗震性能的影响,对3个冷弯型钢组合墙体足尺试件进行低周反复加载试验,分析该加强形式对冷弯型钢组合墙体的破坏模式、侧向刚度、承载能力、延性以及耗能性能的影响。同时采用有限元软件OpenSEES对墙体进行数值分析。结果表明:钢带加强螺钉孔型冷弯型钢组合墙体的破坏形式仍然为螺钉连接失效和板缝滑移,钢带能够使覆面板的螺钉连接处得到加强,从而提高组合墙体的抗侧刚度和受剪承载力; 与螺钉孔未进行钢带加强的墙体试件(HS-140-A)相比,2个加强式的组合墙体试件(HS-140-B,HS-140-C)受剪承载力分别提高了32.5%,58.1%,抗侧刚度分别提高了31.7%,59.3%; 螺钉孔由钢带加强后,墙体试件的耗能性能显著提升; 3个试件的延性系数均大于8,呈现出良好的变形能力; 有限元模型能反映螺钉连接非线性行为对墙体滞回性能的影响,有限元分析结果与试验结果的相对误差控制在10%以内,模型具有较好的精度。
Abstract:
In order to study the impact of strengthened steel strips in screw holes on seismic behavior of cold-formed steel(CFS)framing walls, three full scale specimens of CFS framing walls were tested subjected to low cyclic loads. The influence of the strengthening form on the failure mode, lateral stiffness, bearing capacity, ductility and energy dissipation performance of CFS framing walls was analyzed. The finite element software OpenSEES was used for the numerical analysis of the wall. The results show that the failure mode of the cold-formed steel framing walls with strengthened steel strips in screw holes is still screw connection failure and sheathing seam slip. The steel strip can strengthen the screw connection of the cladding panel, so as to improve the lateral stiffness and shear capacity of the composite wall. Compared with the specimen without steel strip reinforcement in screw hole(HS-140-A), the shear capacity of the strengthened specimens(HS-140-B, HS-140-C)is improved by 32.5% and 58.1%, and their lateral stiffness is increased by 31.7% and 59.3%. The energy dissipation capacity of the specimens was significantly improved after enhancement of screw holes by the steel strips. The ductility coefficients of the three specimens are greater than 8, which shows good deformation ability. The finite element models can represent the effect of screw connections nonlinear behaviour on hysteretic performance of the walls. The relative error between the finite element analysis results and the experimental data is controlled within 10%, and the model has good accuracy.

参考文献/References:

[1] 周绪红,石 宇,周天华,等.低层冷弯薄壁型钢结构住宅体系[J].建筑科学与工程学报,2005,22(2):1-14.
ZHOU Xu-hong,SHI Yu,ZHOU Tian-hua,et al.Cold-formed Steel Framing System of Low-rise Residential Building[J].Journal of Architecture and Civil Engineering,2005,22(2):1-14.
[2]JGJ 227—2011,低层冷弯薄壁型钢房屋建筑技术规程[S].
JGJ 227—2011,Technical Specification for Low-rise Cold-formed Thin-walled Steel Buildings[S].
[3]JGJ/T 421—2018,冷弯薄壁型钢多层住宅技术标准[S]
JGJ/T 421—2018,Technical Standard for Cold-formed Thin-walled Steel Multi-storey Residential Buildings[S].
[4]BADR A R,ELANWAR H H,MOURAD S A.Numerical and Experimental Investigation on Cold-formed Walls Sheathed by Fiber Cement Board[J].Journal of Constructional Steel Research,2019,158:366-380.
[5]BIAN G,CHATTERJEE A,BUONOPANE S G,et al.Reliability of Cold-formed Steel Framed Shear Walls as Impacted by Variability in Fastener Response[J].Engineering Structures,2017,142:84-97.
[6]KECHIDI S,BOURAHLA N,CASTRO J M.Seismic Design Procedure for Cold-formed Steel Sheathed Shear Wall Frames:Proposal and Evaluation[J].Journal of Constructional Steel Research,2017,128:219-232.
[7]FENG R Q,ZHU B C,XU P H,et al.Seismic Performance of Cold-formed Steel Framed Shear Walls with Steel Sheathing and Gypsum Board[J].Thin-walled Structures,2019,143:106238.
[8]NIARI S E,RAFEZY B,ABEDI K.Seismic Behavior of Steel Sheathed Cold-formed Steel Shear Wall:Experimental Investigation and Numerical Modeling[J].Thin-walled Structures,2015,96:337-347.
[9]MOHEBBI S,MIRGHADERI R,FARAHBOD F,et al.Experimental Work on Single and Double-sided Steel Sheathed Cold-formed Steel Shear Walls for Seismic Actions[J].Thin-walled Structures,2015,91:50-62.
[10]SHAMIM I,ROGERS C A.Numerical Evaluation:AISI S400 Steel-sheathed CFS Framed Shear Wall Seismic Design Method[J].Thin-walled Structures,2015,95:48-59.
[11]SELVARAJ S,MADHAVAN M.Flexural Behaviour and Design of Cold-formed Steel Wall Panels Sheathed with Particle Cement Board[J].Journal of Constructional Steel Research,2019,162:105723.
[12]FIORINO L G,SHAKEEL S,MACILLO V,et al.Seismic Response of CFS Shear Walls Sheathed with Nailed Gypsum Panels:Numerical Modelling[J].Thin-walled Structures,2018,122:359-370.
[13]YU C,CHEN Y J.Detailing Recommendations for 1.83 m Wide Cold-formed Steel Shear Walls with Steel Sheathing[J].Journal of Constructional Steel Research,2011,67(1):93-101.
[14]ZEYNALIAN M,RONAGH H R.Seismic Performance of Cold Formed Steel Walls Sheathed by Fibre-cement Board Panels[J].Journal of Constructional Steel Research,2015,107:1-11.
[15]GAO W C,XIAO Y.Seismic Behavior of Cold-formed Steel Frame Shear Walls Sheathed with Ply-bamboo Panels[J].Journal of Constructional Steel Research,2017,132:217-229.
[16]闫维明,赵锦成,谢志强,等.基于锁铆连接的冷弯薄壁型钢开洞组合墙体抗震性能试验研究[J].北京工业大学学报,2019,45(8):754-762.
YAN Wei-ming,ZHAO Jin-cheng,XIE Zhi-qiang,et al.Experimental Study of Seismic Behavior of Cold-formed Thin-walled Steel Shear Walls Using Self-piercing Rivets with Openings[J].Journal of Beijing University of Technology,2019,45(8):754-762.
[17]王宇航,邓 锐,姚欣梅,等.带斜撑冷弯薄壁型钢墙体抗震性能试验[J].建筑科学与工程学报,2019,36(2):30-38.
WANG Yu-hang,DENG Rui,YAO Xin-mei,et al.Experiment on Seismic Behavior of Cold-formed Thin-walled Steel Walls with Diagonal Braces[J].Journal of Architecture and Civil Engineering,2019,36(2):30-38.
[18]WU H,CHAO S,ZHOU T H,et al.Cold-formed Steel Framing Walls with Infilled Lightweight FGD Gypsum Part Ⅰ:Cyclic Loading Tests[J].Thin-walled Structures,2018,132:759-770.
[19]WU H,CHAO S,ZHOU T H,et al.Cold-formed Steel Framing Walls with Infilled Lightweight FGD Gypsum Part Ⅱ:Axial Compression Tests[J].Thin-walled Structures,2018,132:771-782.
[20]刘 斌,郝际平,邵大余,等.低周反复荷载作用下复合式冷弯薄壁型钢墙体抗震性能试验研究[J].地震工程与工程振动,2014,34(6):169-178.
LIU Bin,HAO Ji-ping,SHAO Da-yu,et al.Experimental Study on Seismic Behavior of Cold-formed Thin-wall Steel Composite Walls Under Low Reversed Cyclic Loading[J].Earthquake Engineering and Engineering Dynamics,2014,34(6):169-178.
[21]叶继红,陈 伟,许 阳.冷弯薄壁型钢复合墙体受剪性能数值模拟及简化力学模型研究[J].建筑结构学报,2018,39(11):94-103.
YE Ji-hong,CHEN Wei,XU Yang.Numerical Simulation and Simplified Mechanical Model on Shear Behavior of Enhanced Cold-formed Steel Composite Wall[J].Journal of Building Structures,2018,39(11):94-103.
[22]GB/T 228.1—2010,金属材料拉伸试验第1部分:室温试验方法[S].
GB/T 228.1—2010,Metallic Materials — Tensile Testing — Part 1:Method of Test at Room Temperature[S].
[23]JGJ/T 101—2015,建筑抗震试验规程[S].
JGJ/T 101—2015,Specification for Seismic Test of Buildings[S].

相似文献/References:

备注/Memo

备注/Memo:
收稿日期:2020-08-01
基金项目:国家自然科学基金项目(51508029)
作者简介:袁涛涛(1982-),男,河南漯河人,高级工程师,E-mail:285522786@qq.com。通信作者:吴函恒(1984-),男,河南平顶山人,副教授,工学博士,E-mail:wuhanheng@163.com。
更新日期/Last Update: 2021-05-20