|本期目录/Table of Contents|

[1]丁克伟,叶 堉.装配式混凝土梁柱节点抗震性能试验与数值模拟[J].建筑科学与工程学报,2021,38(04):24-32.[doi:10.19815/j.jace.2020.10073]
 DING Ke-wei,YE Yu.Experiment and Numerical Simulation on Seismic Performance of New Type of Prefabricated Concrete Beam-column Joint[J].Journal of Architecture and Civil Engineering,2021,38(04):24-32.[doi:10.19815/j.jace.2020.10073]
点击复制

装配式混凝土梁柱节点抗震性能试验与数值模拟(PDF)
分享到:

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:
38卷
期数:
2021年04期
页码:
24-32
栏目:
出版日期:
2021-07-15

文章信息/Info

Title:
Experiment and Numerical Simulation on Seismic Performance of New Type of Prefabricated Concrete Beam-column Joint
文章编号:
1673-2049(2021)04-0024-09
作者:
丁克伟1,2,叶 堉1,2
(1. 安徽建筑大学 安徽省建筑结构与地下工程重点实验室,安徽 合肥 230601; 2. 安徽建筑大学 土木工程学院,安徽 合肥 230601)
Author(s):
DING Ke-wei1,2, YE Yu1,2
(1. Anhui Provincial Key Laboratory of Building Structure and Underground Engineering, Anhui Jianzhu University, Hefei 230601, Anhui, China; 2. College of Civil Engineering, Anhui Jianzhu University, Hefei 230601, Anhui, China)
关键词:
装配式混凝土梁柱节点 有限元分析 螺栓连接 抗震性能
Keywords:
prefabricated concrete beam-column joint finite element analysis bolt connection seismic behavior
分类号:
TU375.4
DOI:
10.19815/j.jace.2020.10073
文献标志码:
A
摘要:
为研究不同螺栓强度等级对新型装配式半刚性混凝土梁柱节点抗震性能的影响,分别对螺栓等级为5.6级和8.8级的梁柱节点进行了足尺试验,分析了节点的滞回曲线、骨架曲线、割线刚度、等效黏滞阻尼系数等抗震性能指标,并基于ABAQUS有限元软件对现浇节点和5.6级螺栓连接的试验节点进行了数值模拟。结果表明:基于5.6级和8.8级螺栓连接的半刚性梁柱节点均具有良好的抗震性能和耗能能力,2组梁柱节点构件的刚度均随着位移等级的增加而逐渐降低,与5.6级螺栓连接的节点相比,8.8级螺栓连接的节点刚度退化速率较快,且正向加载下5.6级螺栓连接节点的极限承载力为8.8级螺栓连接节点的85.42%,负向加载下5.6级螺栓连接节点的极限承载力为8.8级螺栓连接节点的83.68%; 有限元模拟结果具有较高的准确性,能够很好地反映节点构件的抗震性能; 与现浇节点对比发现,现浇节点在耗能能力方面比试验节点好,但试验节点的极限承载力要优于现浇节点; 所得结论可为装配式半刚性梁柱结构的抗震设计提供依据,为新型装配式梁柱节点构件的发展及应用提供参考。
Abstract:
In order to study the impact of different bolt strength grades on the seismic performance of the new type of prefabricated concrete beam-column joint, full-scale tests were carried out on the beam-column joints with 5.6 and 8.8 grade bolts, respectively. The seismic performance indicators such as the hysteretic curve, skeleton curve, secant stiffness, and equivalent viscous damping coefficient of the node were discussed. Moreover, based on ABAQUS finite element software, the cast-in-place joint and the test joint with 5.6 grade bolt connection were numerically simulated. The results show that the semi-rigid beam-column joints based on 5.6 and 8.8 grade bolt connections have good seismic performance and energy dissipation capacity. The stiffness of the two groups of beam-column joint members gradually decreases with the increase of the displacement level. Compared with the joint connected by 5.6 grade bolts, the stiffness of the joint connected by 8.8 grade bolts degrades faster, and under the positive load, the ultimate bearing capacity of the joint connected by 5.6 grade bolts is 85.42% of that of the joint connected by 8.8 grade bolts. Under negative loading, the ultimate bearing capacity of the joint connected by 5.6 grade bolts is 83.68% of that of the joint connected by 8.8 grade bolts. The finite element simulation results have high accuracy and can well reflect the seismic performance of joint members. The cast-in-situ joints are better than the experimental joints in terms of energy consumption, but the ultimate bearing capacity of the experimental joints is better than that of the cast-in-place node. The research results can provide a basis for the seismic design of prefabricated semi-rigid beam-column structures and provide a reference for the development and application of new prefabricated beam-column joint members.

参考文献/References:

[1] LIU Y,GUO Z,DING J,et al.Experimental Study on Seismic Behaviour of Plug-in Assembly Concrete Beam-column Connections[J].Engineering Structures,2020,221:111049.
[2]DING K W,MA L.Pseudo-static Analysis of Fabricated Steel Cage Concrete Frame Structure[C]//AMMME.Proceedings of 2016 International Conference on Applied Mechanics,Mechanical and Materials Engineering.Lancaster:DEStech Publications,2017:332-336.
[3]DING K W,LIU J H,REN J,et al.Dynamic Responses of Cellular Metal-filled Steel Beam-column Joint Under Impact Loading[J].Journal of Shanghai Jiaotong University:Science,2020,25(3):1-10.
[4]丁克伟,陈 东,刘运林,等.一种新型拼缝结构的叠合板受力机理及试验研究[J].土木工程学报,2015,48(10):64-69.
DING Ke-wei,CHEN Dong,LIU Yun-lin,et al.Theoretical and Experimental Study on Mechanical Behavior of Laminated Slabs with New Type Joints[J].China Civil Engineering Journal,2015,48(10):64-69.
[5]丁克伟,韩苗兰,李兴龙.装配式半刚性梁柱螺栓连接节点抗震性试验研究[J].合肥工业大学学报:自然科学版,2020,43(6):805-810.
DING Ke-wei,HAN Miao-lan,LI Xing-long.Experimental Research on Seismic Performance of Semi-rigid Bolted Beam-column Joints[J].Journal of Hefei University of Technology:Natural Science,2020,43(6):805-810.
[6]吴从晓,周 云,赖伟山,等.现浇与预制装配式混凝土框架节点抗震性能试验[J].建筑科学与工程学报,2015,32(3):60-66.
WU Cong-xiao,ZHOU Yun,LAI Wei-shan,et al.Experiment on Seismic Performance of Cast-in-situ and Prefabricated Concrete Frame Structure Joints[J].Journal Architecture and Civil Engineering,2015,32(3):60-66.
[7]WANG H,MARINO E M,PAN P,et al.Experimental Study of a Novel Precast Prestressed Reinforced Concrete Beam-to-column Joint[J].Engineering Structures,2018,156:68-81.
[8]KIM S K,KIM J M,HONG W K.Material Nonlinear Finite Element Analysis of Hybrid Hollow Concrete Beams Encasing Steel Sections[J].Structures,2020,25:500-519.
[9]YANG T Y,DASHLEJEH A A,ARABZADEH A,et al.New Model for Prediction of Ultimate Load of Prestressed RC Deep Beams[J].Structures,2020,23:509-517.
[10]OLIVEIRA J L A,ARAUJO D L,EI DEBS M K,et al.Precast Beam-column Connection Subjected to Cyclic and Dynamic Loadings[J].Structural Engineering International,2017,27(1):114-126.
[11]王清湘,赵国潘,林立岩.高强混凝土柱延性的试验研究[J].建筑结构学报,1995,16(4):22-31.
WANG Qing-xiang,ZHAO Guo-fan,LIN Li-yan.Study on Ductility of Reinforced High Strength Concrete Columns[J].Journal of Building Structures,1995,16(4):22-31.
[12]GB 50011—2010,建筑抗震设计规范[S].
GB 50011—2010,Code for Seismic Design of Buildings.[S].
[13]GB/T 50081—2002,普通混凝土力学性能试验方法标准[S].
GB/T 50081—2002,Standard for Text Method of Mechanical Properties on Ordinary Concrete[S].
[14]GB 50010—2010,混凝土结构设计规范[S].
GB 50010—2010,Code for Design of Concrete Structures[S].
[15]JGJ/T 101—2015,建筑抗震试验规程[S].
JGJ/T 101—2015,Specification for Seismic Test of Buildings[S].
[16]ASHRAF E,TAREK S,SALAH N,et al.Behavior of Extended End-plate Bolted Connections Subjected to Monotonic and Cyclic Loads[J].Engineering Structures,2019,190:142-159.
[17]BRUNESI E,NASCIMBENE R,RASSATI G A.Response of Partially-restrained Bolted Beam-to-column Connections Under Cyclic Loads[J].Journal of Constructional Steel Research,2014,97:24-38.
[18]ZHOU Y,HU X,PEI Y,et al.Dynamic Load Test on Progressive Collapse Resistance of Fully Assembled Precast Concrete Frame Structures[J].Engineering Structures,2020,214:110675.

相似文献/References:

[1]宋兵,蔡健.基于ADINA的桩基荷载-沉降全过程计算[J].建筑科学与工程学报,2010,27(01):31.
 SONG Bing,CAI Jian.Calculation of Load-settlement Whole Process for Pile Foundation Based on ADINA[J].Journal of Architecture and Civil Engineering,2010,27(04):31.
[2]薛伟辰,付凯,张克宝,等.高颈法兰轴心受拉试验与有限元分析[J].建筑科学与工程学报,2010,27(02):106.
 XUE Wei-chen,FU Kai,ZHANG Ke-bao,et al.Axial Tensile Test and Finite Element Analysis on High-neck Flanges[J].Journal of Architecture and Civil Engineering,2010,27(04):106.
[3]蒋路,陈以一,王伟栋.带缝钢板剪力墙弹性抗侧刚度及简化模型研究[J].建筑科学与工程学报,2010,27(03):115.
 JIANG Lu,CHEN Yi-yi,WANG Wei-dong.Research on Elastic Lateral Stiffness and Simplified Model of Steel Plate Shear Wall with Slits[J].Journal of Architecture and Civil Engineering,2010,27(04):115.
[4]何敏娟,李征.不同面板钉木剪力墙抗侧承载力试验[J].建筑科学与工程学报,2011,28(01):1.
 HE Min-juan,LI Zheng.Experiment on Lateral Bearing Capacity of Wood Shear Walls with Different Sheathing Nails[J].Journal of Architecture and Civil Engineering,2011,28(04):1.
[5]金怀印,薛伟辰,周德源.RC梁-CCFST柱加强环式节点抗剪承载力计算分析[J].建筑科学与工程学报,2011,28(02):106.
 JIN Huai-yin,XUE Wei-chen,ZHOU De-yuan.Calculation and Analysis of Shear Capacity of Connection with Stiffening Rings Between RC Beam and CCFST Column[J].Journal of Architecture and Civil Engineering,2011,28(04):106.
[6]张川,谭璐.锚固钢筋粘结-滑移性能的滞回模型[J].建筑科学与工程学报,2011,28(03):93.
 ZHANG Chuan,TAN Lu.Bond-slip Hysteretic Model of Anchored Rebar[J].Journal of Architecture and Civil Engineering,2011,28(04):93.
[7]陈宜言,陈宝春,林松.波形钢腹板PC组合箱梁抗扭性能试验与有限元分析[J].建筑科学与工程学报,2011,28(04):106.
 CHEN Yi-yan,CHEN Bao-chun,LIN Song.Experiment of Torsional Performance and Finite Element Analysis of PC Composite Box Girder with Corrugated Steel Webs[J].Journal of Architecture and Civil Engineering,2011,28(04):106.
[8]谭晓晶,吴斌,辛文杰,等.林甸县农村砌体房屋抗震性能调查与分析[J].建筑科学与工程学报,2012,29(02):36.
 TAN Xiao-jing,WU Bin,XIN Wen-jie,et al.Investigation and Analysis of Seismic Behavior of Masonry Buildings in Rural Areas Located in Lindian County[J].Journal of Architecture and Civil Engineering,2012,29(04):36.
[9]潘斌,石永久,王元清.Q460等级高强度钢材螺栓抗剪连接孔壁承压性能有限元分析[J].建筑科学与工程学报,2012,29(02):48.
 PAN Bin,SHI Yong-jiu,WANG Yuan-qing.Finite Element Analysis of Bolted Connection in Q460 Grade High Strength Steels Under Static Shear[J].Journal of Architecture and Civil Engineering,2012,29(04):48.
[10]刘向斌,周天华,何鑫,等.冷弯薄壁型钢住宅结构整体扭转效应分析[J].建筑科学与工程学报,2012,29(02):83.
 LIU Xiang-bin,ZHOU Tian-hua,HE Xin,et al.Analysis of Torsional Effect of Cold-formed Thin-walled Steel Residence Structure[J].Journal of Architecture and Civil Engineering,2012,29(04):83.

备注/Memo

备注/Memo:
收稿日期:2020-10-26
基金项目:国家重点研发计划项目(2016YFC0701500); 国家自然科学基金项目(11472005); 安徽省自然科学基金项目(1908085ME173)
作者简介:丁克伟(1962-),男,安徽合肥人,教授,博士研究生导师,E-mail:1254192805@qq.com。
更新日期/Last Update: 2021-07-10