|本期目录/Table of Contents|

[1]蒋 伟,廖文远,刘德稳,等.洞口形状对腹板开洞钢-混凝土组合梁的受力性能影响分析[J].建筑科学与工程学报,2023,40(03):61-69.[doi:10.19815/j.jace.2022.01075]
 JIANG Wei,LIAO Wenyuan,LIU Dewen,et al.Analysis of influence of opening shape on mechanical performance of steel-concrete composite beams with web openings[J].Journal of Architecture and Civil Engineering,2023,40(03):61-69.[doi:10.19815/j.jace.2022.01075]
点击复制

洞口形状对腹板开洞钢-混凝土组合梁的受力性能影响分析(PDF)
分享到:

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:
40卷
期数:
2023年03期
页码:
61-69
栏目:
建筑结构
出版日期:
2023-05-20

文章信息/Info

Title:
Analysis of influence of opening shape on mechanical performance of steel-concrete composite beams with web openings
文章编号:
1673-2049(2023)03-0061-09
作者:
蒋 伟,廖文远,刘德稳,陈 静,谢 鑫
(西南林业大学 土木工程学院,云南 昆明 655024)
Author(s):
JIANG Wei, LIAO Wenyuan, LIU Dewen, CHEN Jing, XIE Xin
(College of Civil Engineering, Southwest Forestry University, Kunming 655024, Yunnan, China)
关键词:
组合梁 腹板开洞 洞口形状 受力性能
Keywords:
composite beam web opening opening shape mechanical performance
分类号:
TU398.9
DOI:
10.19815/j.jace.2022.01075
文献标志码:
A
摘要:
通过研究洞口形状对腹板开洞钢-混凝土组合梁受力的影响,选择合适的洞口形状以降低开洞造成的不利影响; 在已有试验基础上,利用ANSYS对洞口设置在弯剪区段且洞口形状不同的组合梁进行力学性能分析,研究了洞口形状对承载力、变形能力以及内力重分布和传力机制的影响。结果表明:钢-混凝土组合梁腹板开洞会导致刚度、极限承载力下降; 非正方形洞口组合梁因洞口形状不同,极限变形有不同程度增强; 洞口形状会影响洞口处混凝土、钢梁承担的剪力比例,混凝土占总剪力的46%~59%,而钢梁占总剪力的41%~54%; 极限变形与洞口处塑性铰的面积大小有关; 栓钉会对周围的混凝土产生一定预压力,对混凝土应力重分布有影响,洞口处混凝土的剪力有明显的剪力差,洞口下方钢梁所承受的剪力大于洞口上方钢梁; 洞口形状会影响组合梁内部传力机制,长方形、正方形洞口试件在洞口区域以次弯矩传递力,非长方形、正方形洞口试件在洞口区域以主弯矩传递力; 在结构设计时应该考虑洞口位置的偏心、主应力方向与洞口边缘的夹角。
Abstract:
By studying the influence of opening shape on the stress of steel-concrete composite beams with web openings, selecting an appropriate opening shape to reduce the adverse effects caused by opening. Based on existing experiments, ANSYS was used to analyze the mechanical performance of composite beams with different shapes of openings in the bending shear section. The influence of opening shape on bearing capacity, deformation capacity, internal force redistribution, and force transmission mechanism was studied. The results show that web opening of steel concrete composite beams can lead to a decrease in stiffness and ultimate bearing capacity. The ultimate deformation of composite beams with non square openings is enhanced to varying degrees due to different shapes of openings. Shapes of openings will affect the proportion of shear force borne by concrete and steel beams at the opening. Concrete accounts for 46%-59% of the total shear force, while steel beams account for 41%-54% of the total shear force. The ultimate deformation is related to the area of the plastic hinge at the opening. Studs will exert a certain pre-pressure on the surrounding concrete and have an impact on the redistribution of stress in the concrete. There is a significant difference in shear force in the concrete at the entrance, and the shear force borne by the steel beam below the entrance is greater than that of the steel beam above the entrance. The shape of the opening will affect the internal force transfer mechanism of the composite beam. The rectangular and square opening specimens transmit force through secondary bending moment in the opening area, while the non rectangular and square opening specimens transmit force through primary bending moment in the opening area. In structural design, consideration should be given to the eccentricity of the opening position and the angle between the direction of the main stress and the edge of the opening.

参考文献/References:

[1] FERREIRA F,MARTINS C H,NARDIN S D.Advances in composite beams with web openings and composite cellular beams[J].Journal of Constructional Steel Research,2020,172:106182.
[2]白永生,蒋永生,梁书亭,等.腹板开洞的钢与混凝土组合梁承载力计算方法综述和探讨[J].工业建筑,2004,34(6):68-70,83.
BAI Yongsheng,JIANG Yongsheng,LIANG Shu ting,et al.Exploration and summarization of method of computing bearing capacity of steel-concrete composite beams with web opening[J].Industrial Construction,2004,34(6):68-70,83.
[3]张 伟,胡夏闽.腹板开洞钢-混凝土组合梁的抗弯和抗剪设计[J].建筑钢结构进展,2009,11(5):25-30.
ZHANG Wei,HU Xiamin.Bending and shear capacity of composite steel-concrete beams with web openings[J].Progress in Steel Building Structures,2009,11(5):25-30.
[4]CHEN T,GU X L,LI H.Behavior of steel-concrete composite cantilever beams with web openings under negative moment[J].International Journal of Steel Structures,2011,11(1):39-49.
[5]寇立亚,胡夏闽,张允领.腹板开洞钢-混凝土组合梁极限承载力的影响因素分析[J].钢结构,2012,27(12):15-20,6.
KOU Liya,HU Xiamin,ZHANG Yunling.Analysis of influence factors of bearing capacity of steel-concrete composite beams with web opening[J].Steel Construction,2012,27(12):15-20,6.
[6]寇立亚,胡夏闽.考虑混凝土板作用的腹板开洞钢-混凝土组合梁承载力有限元分析[J].四川建筑科学研究,2012,38(6):65-69.
KOU Liya,HU Xiamin.FEM analysis of bearing capacity of steel-concrete composite beams with web opening considering concrete slab[J].Sichuan Building Science,2012,38(6):65-69.
[7]王 鹏,周东华,王永慧,等.腹板开洞钢-混凝土组合梁非线性有限元分析[J].沈阳建筑大学学报(自然科学版),2011,27(5):809-817.
WANG Peng,ZHOU Donghua,WANG Yonghui,et al.Nonlinear FEM analysis on steel-concrete composite beam with web opening[J].Journal of Shen-yang Jianzhu University(Natural Science),2011,27(5):809-817.
[8]王 鹏,周东华,王永慧,等.带加劲肋腹板开洞组合梁极限承载力理论研究[J].工程力学,2013,30(5):138-146,152.
WANG Peng,ZHOU Donghua,WANG Yonghui,et al.Theoretical study on ultimate bearing capacity of composite beams with reinforced web opening[J].Engineering Mechanics,2013,30(5):138-146,152.
[9]王 鹏,周东华,王永慧,等.腹板开洞钢-混凝土组合梁抗剪承载力试验研究[J].工程力学,2013,30(3):297-305.
WANG Peng,ZHOU Donghua,WANG Yonghui,et al.Experimental study on shear strength of steel-concrete composite beams with web opening[J].Engineering Mechanics,2013,30(3):297-305.
[10]ELLOBODY E,YOUNG B.Behaviour and design of composite beams with stiffened and unstiffened web openings[J].Advances in Structural Engineering,2015,18(6):893-918.
[11]童根树,陈 迪.腹板开孔的钢-混凝土组合梁的挠度计算[J].工程力学,2015,32(12):168-178.
TONG Genshu,CHEN Di.Deflection calculation of composite beams with web openings[J].Engineering Mechanics,2015,32(12):168-178.
[12]SHANMUGAM N E,DAREHSHOURI S F,OSMAN S A.Experimental study on composite plate girders with web opening[J].Structures and Buildings,2014,167(12):704-717.
[13]ELSHAER M A.Structural analysis of a composite continuous girder with a single rectangular web opening[J].HBRC Journal,2017,13(2):152-162.
[14]CLAEN M,KURZ W,SCHFER M,et al.A mechanical design model for steel and concrete composite members with web openings[J].Engineering Structures,2019,197:109417.
[15]贾连光,李鹏宇,焦禹铭.六边形孔蜂窝组合梁的等效抗剪刚度研究[J].沈阳建筑大学学报(自然科学版),2020,36(1):11-18.
JIA Lianguang,LI Pengyu,JIAO Yuming.Study on equivalent shear stiffness of hexagonal cellular composite beams[J].Journal of Shenyang Jianzhu University(Natural Science),2020,36(1):11-18.
[16]DU H,HU X,SHI D,et al.Effect of reinforcement on the strength of the web opening in steel-concrete composite beam[J].Engineering Structures,2021,235:112038.
[17]LI L Q,LIAO W Y,HUO B Y.Finite element modeling and nonlinear analysis on the optimum opening location for continuous composite beams with web openings[J].Tehnicki Vjesnik - Technical Gazette,2021,28(3):891-897.
[18]OLLGAARD J G,SLUTTER R G,FISHER J W.Shear strength of stud connectors in lightweight and normal-weight concrete[J].Engineering Journal of American of Steel Construction,1971,8(2):55-64.

相似文献/References:

备注/Memo

备注/Memo:
收稿日期:2022-01-21
基金项目:国家自然科学基金青年科学基金项目(51808467); 云南省科技厅青年项目(2017FD107)
作者简介:蒋 伟(1988-),男,工学硕士研究生,E-mail:jw3477@126.com。
通信作者:廖文远(1987-),男,工学博士,副教授,E-mail:lwy065@126.com。
更新日期/Last Update: 2023-05-20