|本期目录/Table of Contents|

[1]方 海,韩 娟,刘伟庆,等.GFRP-花旗松胶合木夹芯桥面板受弯性能试验与结构设计[J].建筑科学与工程学报,2014,31(03):58-63.
　FANG Hai,HAN Juan,LIU Wei-qing,et al.Experiment on Bending Capacity and Structural Design of GFRP-pseudotsuga Taxifolia Glulam Bridge Deck[J].Journal of Architecture and Civil Engineering,2014,31(03):58-63.
点击复制

GFRP-花旗松胶合木夹芯桥面板受弯性能试验与结构设计(PDF)
分享到：

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:
31卷
期数:
2014年03期
页码:
58-63
栏目:
出版日期:
2014-09-30

文章信息/Info

Title:
Experiment on Bending Capacity and Structural Design of GFRP-pseudotsuga Taxifolia Glulam Bridge Deck
作者:
方 海，韩 娟，刘伟庆，祝 露
南京工业大学土木工程学院
Author(s):
FANG Hai, HAN Juan, LIU Wei-qing, ZHU Lu
School of Civil Engineering, Nanjing University of Technology
关键词:
GFRP; 胶合木; 夹芯结构; 桥面板; 抗弯刚度
Keywords:
GFRP;  glulam;  sandwich structure;  bridge deck;  beading stiffness
分类号:
-
DOI:
-
文献标志码:
A
摘要:
采用花旗松胶合木作为芯材，玻璃纤维增强复合材料（GFRP）作为面层制备夹芯结构桥面板，在对花旗松胶合木芯材和GFRP开展基本力学性能试验研究的基础上，开展了GFRP-花旗松胶合木夹芯梁的受弯性能试验，得出了其荷载-跨中挠度曲线与GFRP荷载-跨中应变曲线，并对抗弯刚度测试值与理论计算值进行了对比；针对某GFRP-花旗松胶合木桥面板，提出了完整的结构设计流程，给出了桥面板的合理设计参数。研究结果表明：GFRP-花旗松胶合木桥面板应用于钢梁-复合材料桥面板组合桥梁结构较为可行。
Abstract:
The bridge panel of sandwich structure was manufactured by using pseudotsuga taxifolia glulam as core materials and glass fiber reinforced polymer (GFRP) as surface course. The bending experiment of GFRP-pseudotsuga taxifolia glulam beam was carried out based on basic mechanical property of pseudotsuga taxifolia glulam core materials and GFRP. From the bending experiment, the loadmidspan deflection curve and GFRP loadmidspan strain curve were got, and the test value was compared with theoretical value of bending stiffness. It brought up a whole structured design process of a sandwich structure bridge deck, and gave the design parameter of bridge deck. The study results show that using GFRPpseudotsuga taxifolia glulam bridge deck into girdercomposite bridge panel is feasible.

参考文献/References:

相似文献/References:

[1]王 跃,方 海,刘伟庆.钢蒙皮-复合材料芯材夹层板弯曲性能研究[J].建筑科学与工程学报,2015,32(01):73.
　WANG Yue,FANG Hai,LIU Wei-qing.Research on Bending Properties of Metal Faced-composite Core Sandwich Panel[J].Journal of Architecture and Civil Engineering,2015,32(03):73.
[2]马贵进,徐德良,陆伟东,等.湿度对胶合木销槽承压强度的影响试验[J].建筑科学与工程学报,2016,33(01):120.
　MA Gui-jin,XU De-liang,LU Wei-dong,et al.Experiment on Effect of Humidity on Dowel Bearing Strength of Glued Laminated Timber[J].Journal of Architecture and Civil Engineering,2016,33(03):120.
[3]黄海林,宾 智,祝明桥,等.T形肋GFRP抗剪连接件的静载推出试验[J].建筑科学与工程学报,2016,33(02):77.
　HUANG Hai-lin,BIN Zhi,ZHU Ming-qiao,et al.Static Push-out Tests for T-type Rib GFRP Shear Connectors[J].Journal of Architecture and Civil Engineering,2016,33(03):77.

备注/Memo

备注/Memo:
更新日期/Last Update: 2014-09-30