|本期目录/Table of Contents|

[1]高占远,郭彦林.焊接残余应力对Y型相贯节点极限承载力影响分析[J].建筑科学与工程学报,2016,33(06):73-80.
　GAO Zhan-yuan,GUO Yan-lin.Analysis on Influence of Welding Residual Stress on Ultimate Bearing Capacity of Y-joints[J].Journal of Architecture and Civil Engineering,2016,33(06):73-80.
点击复制

焊接残余应力对Y型相贯节点极限承载力影响分析(PDF)
分享到：

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:
33卷
期数:
2016年06期
页码:
73-80
栏目:
出版日期:
2016-11-30

文章信息/Info

Title:
Analysis on Influence of Welding Residual Stress on Ultimate Bearing Capacity of Y-joints
作者:
高占远，郭彦林
清华大学土木工程系
Author(s):
GAO Zhan-yuan, GUO Yan-lin
Department of Civil Engineering, Tsinghua University
关键词:
Y型相贯节点; 极限承载力; 牛顿-拉普森法; 弧长法; 焊接残余应力; 参数分析
Keywords:
Y-joint;  ultimate bearing capacity;  Newton-Raphson method;  arc-length method;  welding residual stress;  parameter analysis
分类号:
-
DOI:
-
文献标志码:
A
摘要:
采用ANSYS的热结构间接耦合、生死单元技术模拟Y型相贯节点的焊接过程；将牛顿-拉普森法和弧长法结合，求解Y型相贯节点极限承载力，给出求解流程；分析支管外径与主管外径比、支管倾角、主管径厚比等几何参数对Y型相贯节点极限承载力的影响，将考虑和不考虑焊接残余应力的计算结果进行对比分析。研究结果表明：焊接残余应力降低了Y型相贯节点的极限承载力；支管外径与主管外径比β越大，主管的径厚比γ越小，支管倾角θ越小，则Y型相贯节点极限承载力降低越多；结构设计时，保证强度和安全的前提下选择合适的支管外径、主管壁厚和支管倾角，可减小焊接残余应力对Y型相贯节点极限承载力的影响。
Abstract:
The welding process of Y-joint was simulated by using thermal structure indirect coupling and birth-death element in ANSYS. Combined Newton-Raphson method and arc-length method, the ultimate bearing capacity of Y-joints was solved, and solution flow was given. The influence of geometric parameters such as the ratio of diameter of branch pipe and diameter of pipe, angle of branch pipe, ratio of diameter and thickness of pipe, on the ultimate bearing capacity of Y-joints with considering welding residual stress was analyzed. Ultimate bearing capacities of Y-joints with welding residual stresses and without welding residual stresses were compared and analyzed. The results show that the ultimate bearing capacity of Yjoint is reduced by welding residual stress; because values of the βare larger, or values of the γ are smaller, or values of the θare smaller, the ultimate bearing capacity of Y-joint is more reduced. In structural design, to ensure the strength and safety of structure, choosing the suitable diameter and angle of branch pipe, wall thickness of pipe, the effect of welding residual stress on ultimate bearing capacity of Y-joint can be reduced.

参考文献/References:

相似文献/References:

[1]成 博,武振宇.组装式钢货架螺栓连接梁柱节点试验[J].建筑科学与工程学报,2013,30(03):71.
　]CHENG Bo,WU Zhen-yu.Experiment on Bolted Beam-to-column Connections in Assembled Steel Storage Racks[J].Journal of Architecture and Civil Engineering,2013,30(06):71.
[2]高春彦,杨卫平,李 斌,等.圆钢管混凝土K型焊接管板节点受力性能试验[J].建筑科学与工程学报,2014,31(04):51.
　GAO Chun-yan,YANG Wei-ping,LI Bin,et al.Experiment on Mechanical Behavior for Concrete-filled Circular Steel Tube K-type Welded Tube-gusset Joints[J].Journal of Architecture and Civil Engineering,2014,31(06):51.
[3]刘永健,姜 磊,张 宁.钢管混凝土中钢管的纵向容许应力[J].建筑科学与工程学报,2015,32(06):1.
　LIU Yong-jian,JIANG Lei,ZHANG Ning.Longitudinal Allowable Stress of Steel Tube in Concrete-filled Steel Tube[J].Journal of Architecture and Civil Engineering,2015,32(06):1.
[4]赵均海,杜文超,张常光.CFRP-方钢管混凝土轴压短柱承载力分析[J].建筑科学与工程学报,2015,32(06):30.
　ZHAO Jun-hai,DU Wen-chao,ZHANG Chang-guang.Analysis of Load Carrying Capacity of Concrete-filled Square CFRP-steel Tubular Stub Column Under Axial Compression[J].Journal of Architecture and Civil Engineering,2015,32(06):30.
[5]林 峰,黎艳翔,董 羽.CFRP加固钢筋混凝土直剪承载力试验[J].建筑科学与工程学报,2015,32(06):43.
　LIN Feng,LI Yan-xiang,DONG Yu.Experiment on Shear Transfer Capacity of Reinforced Concrete Strengthened with CFRP[J].Journal of Architecture and Civil Engineering,2015,32(06):43.
[6]程东辉,俞永志,董志鹏.无粘结预应力再生粗骨料混凝土梁力学性能[J].建筑科学与工程学报,2016,33(01):30.
　CHENG Dong-hui,YU Yong-zhi,DONG Zhi-peng.Mechanical Properties of Unbonded Prestressed Recycled Coarse Aggregate Concrete Beam[J].Journal of Architecture and Civil Engineering,2016,33(06):30.
[7]黄海林,宾 智,祝明桥,等.T形肋GFRP抗剪连接件的静载推出试验[J].建筑科学与工程学报,2016,33(02):77.
　HUANG Hai-lin,BIN Zhi,ZHU Ming-qiao,et al.Static Push-out Tests for T-type Rib GFRP Shear Connectors[J].Journal of Architecture and Civil Engineering,2016,33(06):77.
[8]鞠彦忠,闫冬雪,白俊峰,等.钢管十字插板连接承载力试验研究及有限元分析[J].建筑科学与工程学报,2016,33(05):77.
　JU Yan-zhong,YAN Dong-xue,BAI Jun-feng,et al.Experiment Research and Finite Element Analysis of Ultimate Bearing Capacity of Steel Tube Connection with Cross Flashboard[J].Journal of Architecture and Civil Engineering,2016,33(06):77.
[9]陈以一,何雅雯.基于广义塑性铰线法的压弯钢构件极限承载力计算[J].建筑科学与工程学报,2016,33(06):14.
　CHEN Yi-yi,HE Ya-wen.Calculation of Ultimate Bearing Capacity of Steel Beam-columns Based on Generalized Yield Line Method[J].Journal of Architecture and Civil Engineering,2016,33(06):14.
[10]王苏岩,宋泽林,丁 荔.冻融循环与持载对CFRP加固高强混凝土梁变形性能的影响[J].建筑科学与工程学报,2017,34(02):26.
　WANG Su-yan,SONG Ze-lin,DING Li.Influence of Freeze-thaw Cycles and Sustained Loads on Deformation Performance of High Strength Concrete Beam Strengthened with CFRP[J].Journal of Architecture and Civil Engineering,2017,34(06):26.

备注/Memo

备注/Memo:
更新日期/Last Update: 2016-12-07