|本期目录/Table of Contents|

[1]王先铁,林麟珲,宋文俊,等.竖向闭口槽钢加劲钢板剪力墙在非均匀压剪作用下的屈曲性能[J].建筑科学与工程学报,2017,34(06):51-58.
　WANG Xian-tie,LIN Lin-hui,SONG Wen-jun,et al.Buckling Behavior of Steel Plate Shear Wall Stiffened by Vertical Closed Channel Stiffeners Under Non-uniform Pressure and Shear Load[J].Journal of Architecture and Civil Engineering,2017,34(06):51-58.
点击复制

竖向闭口槽钢加劲钢板剪力墙在非均匀压剪作用下的屈曲性能(PDF)
分享到：

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:
34卷
期数:
2017年06期
页码:
51-58
栏目:
出版日期:
2017-11-30

文章信息/Info

Title:
Buckling Behavior of Steel Plate Shear Wall Stiffened by Vertical Closed Channel Stiffeners Under Non-uniform Pressure and Shear Load
作者:
王先铁，林麟珲，宋文俊，罗 遥，张 力，刘海锋
西安建筑科技大学土木工程学院
Author(s):
WANG Xian-tie, LIN Lin-hui, SONG Wen-jun, LUO Yao, ZHANG Li, LIU Hai-feng
School of Civil Engineering, Xi’an University of Architecture and Technology
关键词:
钢板剪力墙; 竖向加劲; 非均匀压剪; 屈曲性能; 阈值刚度
Keywords:
steel plate shear wall;  vertical stiffening;  non-uniform pressure and shear;  buckling behavior;  threshold stiffness
分类号:
-
DOI:
-
文献标志码:
A
摘要:
对竖向闭口槽钢加劲钢板剪力墙在非均匀压应力和剪应力共同作用下的屈曲性能进行了有限元分析，得到了竖向闭口槽钢加劲钢板剪力墙的临界屈曲剪应力随加劲肋加劲系数的变化曲线及阈值刚度，提出了剪应力和竖向压应力共同作用下加劲肋阈值刚度的计算公式。结果表明：加劲肋阈值刚度随着小区格宽高比、竖向压应力非均匀系数、加劲肋数目和加劲肋抗扭刚度与抗弯刚度比增大而减小；提高加劲肋抗扭刚度与抗弯刚度比能显著降低加劲肋阈值刚度；加劲肋阈值刚度公式计算结果与有限元分析结果吻合较好。
Abstract:
The buckling behavior analysis of steel plate shear wall (SPSW) stiffened by vertical closed channel stiffeners under the combination of non-uniform vertical compression stress and shear stress was carried out by using finite element software. The curves relating the critical buckling shear stress of SPSW stiffened by vertical closed channels to the stiffening coefficient of stiffeners and threshold stiffness were obtained. The formulas were proposed to calculate the threshold stiffness of the stiffeners under the combination of shear stress and non-uniform vertical compression stress. The results show that threshold stiffness decreases with the increase of the width-to-height of portion, non-uniform compressive stress coefficient, the number of stiffeners and the ratio of the torsional stiffness to the flexural stiffness of the stiffeners. The threshold stiffness of stiffeners decreases significantly with the increase of the ratio of the torsional stiffness to the flexural stiffness of stiffeners. The formula calculation results of threshold stiffness agree well with the finite element analysis results.

参考文献/References:

相似文献/References:

[1]郑宏,潘天久,卫磊.深梁填充钢框架的发展与研究进展 [J].建筑科学与工程学报,2013,30(04):32.
　ZHENG Hong,PAN Tian-jiu,WEI Lei.Development and Research Progress of Steel Frame Infilled with Deep Beam[J].Journal of Architecture and Civil Engineering,2013,30(06):32.
[2]郭彦林,周明.钢板剪力墙的分类及性能[J].建筑科学与工程学报,2009,26(03):1.
　GUO Yan-lin,ZHOU Ming.Categorization and Performance of Steel Plate Shear Wall[J].Journal of Architecture and Civil Engineering,2009,26(06):1.

备注/Memo

备注/Memo:
更新日期/Last Update: 2017-11-30