«上一篇/Previous Article|本期目录/Table of Contents|下一篇/Next Article»

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:

36卷

期数:

2019年02期

页码:

48-55

栏目:

出版日期:

2019-03-26

文章信息/Info

Title:

Force Performance of Cover-plate Diagonal Stiffening Steel Plate Shear Wall

文章编号:

1673-2049(2019)02-0048-08

作者:

郑 宏,张 敏,王嘉政,王 威

(长安大学 建筑工程学院,陕西 西安 710061)

Author(s):

ZHENG Hong, ZHANG Min, WANG Jia-zheng, WANG Wei

(School of Civil Engineering, Chang'an University, Xi'an 710061, Shaanxi, China)

关键词:

盖板加强斜加劲钢板剪力墙;  初始刚度;  滞回曲线;  骨架曲线;  屈曲荷载

Keywords:

cover-plate diagonal stiffening steel plate shear wall;  initial stiffness;  hysteretic curve;  skeleton curve;  buckling load

分类号:

TU398.2

DOI:

-

文献标志码:

A

摘要:

提出一种新型抗侧力体系——盖板加强斜加劲钢板剪力墙,运用有限元软件ANSYS15.0对斜加劲钢板剪力墙(DSW)、单侧盖板加强斜加劲钢板剪力墙(CSW-1)、双侧盖板加强斜加劲钢板剪力墙(CSW-2)结构进行单调加载、循环加载以及屈曲荷载研究,得到结构的荷载-位移曲线、滞回曲线、耗能能力、骨架曲线、屈曲系数、屈曲荷载等,对比分析了加强盖板斜加劲钢板剪力墙结构的受力性能。结果表明:单调加载条件下,加强盖板的存在提高了斜加劲钢板剪力墙的承载力和初始刚度,且双侧加强比单侧加强更优; 循环加载条件下,加强盖板使得盖板加强斜加劲钢板剪力墙的滞回曲线更加饱满,刚度退化更缓慢,表现出良好的延性,且双侧盖板加强效果比单侧加强效果明显; 斜加劲肋对内填钢板的平面外变形约束明显,盖板对加劲肋的平面外约束明显,可以在较小的用钢量下获得较大的弹性屈曲荷载增幅,是十分有效的加强方式,综合考虑加劲肋与加强盖板对结构弹性屈曲荷载的影响,建议肋板刚度比取30,盖板相似比取0.5。

Abstract:

A new anti lateral force system — cover-plate diagonal stiffening steel plate shear wall was proposed. The finite element software ANSYS15.0 was used to simulate the monotonic loading, cyclic loading and buckling load of the diagonal stiffened steel plate wall(DSW), the single side cover-plate stiffening steel plate shear wall(CSW-1), the double cover-plate stiffening steel plate shear wall(CSW-2)structure. The load-displacement curves, hysteretic curves, skeleton curves, buckling coefficients, buckling loads were obtained, and the force performances of cover-plate stiffening steel plate shear wall structures were compared and analysed. The results indicate that under the monotonic loading, the existence of strengthened cover-plate increases the bearing capacity and initial stiffness of the diagonal stiffening steel plate wall, and CSW-2 is better than CSW-1. Under the cyclic loading, the hysteretic curves of CSW are fuller, the stiffness degradation is slower and the ductility is better, and the reinforcing effect of CSW-2 is better than that of CSW-1. The out-of-plane constraint effect of the diagonal stiffener on the inner steel plate is obvious, and the out-of-plane constraint effect of the cover-plate on the stiffener is also obvious. The elastic buckling load can be increased with a small amount of steel. Considering the influence of stiffener and cover-plate on the elastic buckling load, the suggested value of stiffness ratio of stiffener plate is 30 and the similarity ratio of cover plate is 0.5.

参考文献/References:

References:
[1] MIMURA H,AKIYAMA H.Load-deflection Relationship of Earthquake-resistant Steel Shear Walls with a Developed Diagonal Tension Field[J].Transactions of the Architectural Institute of Japan,1977,260:109-114.
[2]SHEKASTEHBAND B,AZARAXSH A,SHOWKATI H.Experimental and Numerical Study on Seismic Behavior of LYS and HYS Steel Plate Shear Walls Connected to Frame Beams Only[J].Archives of Civil and Mechanical Engineering,2017,17(1):154-168.
[3]GUO H C,LI Y L,LING G.Experimental Study of Cross Stiffened Steel Plate Shear Wall with Semi-rigid Connected Frame[J].Journal of Constructional Steel Research,2017,135:69-82.
[4]王先铁,林麟珲,宋文俊,等.竖向闭口槽钢加劲钢板剪力墙在非均匀压减作用下的屈曲性能[J].建筑科学与工程学报,2017,34(6):51-58.
WANG Xian-tie,LIN Lin-hui,SONG Wen-jun,et al.Buckling Behavior of Steel Plate Shear Wall Stiffened by Vertical Closed Channel Stiffeners Under Non-uniform Pressure and Shear Load[J].Journal of Architecture and Civil Engineering,2017,34(6):51-58.
[5]王迎春,郝际平,李 峰,等.钢板剪力墙力学性能研究[J].西安建筑科技大学学报:自然科学版,2007,39(2):181-186.
WANG Ying-chun,HAO Ji-ping,LI Feng,et al.Study on Mechanical Property of Steel Plate Shear Walls[J].Journal of Xi'an University of Architecture & Technology:Natural Science Edition,2007,39(2):181-186.
[6]WEI M W,RICHARD LIEW J Y,DU Y,et al.Seismic Behavior of Novel Partially Connected Buckling-restrained Steel Plate Sheer Walls[J].Soil Dynamics and Earthquake Engineering,2017,103:64-75.
[7]袁昌鲁,郝际平,樊春雷.抗弯钢框架-密肋网格复合钢板墙抗侧力体系抗震性能理论与试验研究[J].土木工程学报,2016,49(1):42-52.
YUAN Chang-lu,HAO Ji-ping,FAN Chun-lei.Test and Analysis on Seismic Behavior of Steel Frame with Multi-ribbed Grid Composited Steel Plate Shear Wall Structure[J].China Civil Engineering Journal,2016,49(1):42-52.
[8]郭彦林,周 明.钢板剪力墙的分类及性能[J].建筑科学与工程学报,2009,26(3):1-13.
GUO Yan-lin,ZHOU Ming.Categorization and Performance of Steel Plate Shear Wall[J].Journal of Architecture and Civil Engineering,2009,26(3):1-13.
[9]陈国栋.钢板剪力墙结构性能研究[D].北京:清华大学,2002.
CHEN Guo-dong.The Investigation to Structural Behavior of Steel Plate Shear Walls[D].Beijing:Tsinghua University,2002.
[10]陈国栋,郭彦林.十字加劲钢板剪力墙的抗剪极限承载力[J].建筑结构学报,2004,25(1):71-78.
CHEN Guo-dong,GUO Yan-lin.Ultimate Shear-carrying Capacity of Steel Plate Shear Wall with Cross Stiffeners[J].Journal of Building Structures,2004,25(1):71-78.
[11]陈国栋,郭彦林,范 珍,等.钢板剪力墙低周反复荷载试验研究[J].建筑结构学报,2004,25(2):19-26,28.
CHEN Guo-dong,GUO Yan-lin,FAN Zhen,et al.Cyclic Test of Steel Plate Shear Walls[J].Journal of Building Structures,2004,25(2):19-26,28.
[12]郭彦林,缪友武,董全利.全加劲两侧开缝钢板剪力墙弹性屈曲研究[J].建筑钢结构进展,2007,9(3):58-62.
GUO Yan-lin,MIAO You-wu,DONG Quan-li.Elastic Buckling Behavior of Stiffened Steel Plate Shear Walls Slotted at Two Edges[J].Progress in Steel Building Structures,2007,9(3):58-62.
[13]曹春华.斜加劲钢板剪力墙性能研究[D].西安:西安建筑科技大学,2008.
CAO Chun-hua.The Investigation to Behavior of Diagonal Stiffened Steel Plate Shear Walls[D].Xi'an:Xi'an University of Architecture & Technology,2008.
[14]巩玉发,李 闯.斜加劲薄钢板剪力墙滞回性能模拟[J].辽宁工程技术大学学报:自然科学版,2016,35(8):841-844.
GONG Yu-fa,LI Chuang.Simulation of Hysteretic Behavior of Slanted Stiffened Steel Plate Shear Wall[J].Journal of Liaoning Technical University:Natural Science,2016,35(8):841-844.
[15]王 萌,杨维国.薄钢板剪力墙结构滞回行为研究[J].建筑结构学报,2015,36(1):68-77.
WANG Meng,YANG Wei-guo.Hysteretic Behaviors Study of Thin Steel Plate Shear Wall Structures[J].Journal of Building Structures,2015,36(1):68-77.
[16]王 恒.带缝钢板剪力墙性能研究[D].西安:西安建筑科技大学,2006.
WANG Heng.The Analysis on the Behaviors of Steel Shear Wall with Slits[D].Xi'an:Xi'an University of Architecture & Technology,2006.
[17]李 然.钢板剪力墙与组合剪力墙滞回性能研究[D].哈尔滨:哈尔滨工业大学,2011.
LI Ran.Hysteretic Behavior of Steel Plate Shear Walls and Composite Steel Plate[D].Harbin:Harbin Institute of Technology,2011.
[18]郭彦林,陈国栋,缪友武.加劲钢板剪力墙弹性抗剪屈曲性能研究[J].工程力学,2006,23(2):84-91,59.
GUO Yan-lin,CHEN Guo-dong,MIAO You-wu.Elastic Buckling Behavior of Steel Plate Shear Wall with Cross or Diagonal Stiffeners[J].Engineering Mechanics,2006,23(2):84-91,59.
[19]赵 伟,杨强跃,童根树,等.钢板剪力墙加劲肋刚度及弹性临界应力研究[J].工程力学,2010,27(6):15-23.
ZHAO Wei,YANG Qiang-yue,TONG Gen-shu,et al.Stiffener Stiffness and Elastic Buckling Stress of Steel Plate Shear Wall[J].Engineering Mechanics,2010,27(6):15-23.

相似文献/References:

备注/Memo

备注/Memo:

收稿日期:2018-08-16
基金项目:国家自然科学基金项目(50678025)
作者简介:郑 宏(1964-),男,黑龙江哈尔滨人,教授,博士研究生导师,工学博士,博士后,E-mail:cehzheng@chd.edu.cn。

常用功能

更新日期/Last Update: 2019-03-27