|本期目录/Table of Contents|

[1]肖建庄,刘良林,董毓利,等.高性能混凝土高温爆裂研究进展[J].建筑科学与工程学报,2019,36(03):1-15.
　XIAO Jian-zhuang,LIU Liang-lin,DONG Yu-li,et al.Progress of Study on Explosive Spalling of High Performance Concrete at Elevated Temperatures[J].Journal of Architecture and Civil Engineering,2019,36(03):1-15.
点击复制

高性能混凝土高温爆裂研究进展(PDF)
分享到：

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:
36卷
期数:
2019年03期
页码:
1-15
栏目:
出版日期:
2019-05-22

文章信息/Info

Title:
Progress of Study on Explosive Spalling of High Performance Concrete at Elevated Temperatures
文章编号:
1673-2049(2019)03-0001-15
作者:
肖建庄1,刘良林1,董毓利2,骆发江3,高皖扬1
(1. 同济大学 土木工程学院,上海 200092; 2. 华侨大学 土木工程学院,福建 厦门 361021; 3. 中国建筑第三工程局有限公司,湖北 武汉 430074)
Author(s):
XIAO Jian-zhuang1, LIU Liang-lin1, DONG Yu-li2, LUO Fa-jiang3, GAO Wan-yang1
(1. College of Civil Engineering, Tongji University, Shanghai 200092, China; 2. College of Civil Engineering, Huaqiao University, Xiamen 361021, Fujian, China; 3. China Construction Third Engineering Bureau Co., Ltd., Wuhan 430074, Hubei, China)
关键词:
高性能混凝土;  爆裂机理;  影响因素;  爆裂抑制;  高温
Keywords:
high performance concrete;  mechanism of explosive spalling;  influence factor;  inhibition for explosive spalling;  elevated temperature
分类号:
TU375
DOI:
-
文献标志码:
A
摘要:
基于高性能混凝土应用的广泛性和遭遇火灾的危害性,对国内外关于高性能混凝土在高温或火灾下发生爆裂的研究进行分类总结。高性能混凝土爆裂研究的梳理工作围绕爆裂机理、爆裂影响因素、爆裂抑制3个方面来展开。结果表明:当前爆裂机理学说还不能全面揭示高性能混凝土爆裂发生的原因,但是存在的共同点是蒸汽压力和热应力与混凝土抗拉强度的相互作用; 高性能混凝土爆裂的影响因素众多,有必要对基本因素的孔压力计算方法开展进一步研究; 高性能混凝土爆裂的预防措施众多且有效,单掺聚丙烯纤维、钢纤维的掺量可参照相关表达式进行预测,二者混杂时掺量间的关系还未见报道,经过综合对比分析,推荐在高性能混凝土中掺入聚丙烯纤维; 针对新建、既有的高性能混凝土结构以及超高性能混凝土,建议开展爆裂设计,从源头上实现爆裂抑制; 对于掺入外加物的高性能混凝土结构,还需要进行火灾中与火灾后的力学性能研究,而对于采取外涂或外贴方式抑制爆裂的结构则需要进行拆装施工工艺与规范化的研究。
Abstract:
Based on the extensive use of high performance concrete(HPC)and the danger of fire, researches on HPC explosive spalling at elevated temperatures or fire were classified and summarized, both at home and abroad. The sorting of HPC explosive spalling was focused on three aspects: mechanism, influence factor, inhibition. The results show that the current theories cannot fully explain HPC explosive spalling under elevated temperature or fire, but there is a common point that the explosive spalling is the interaction of thermal pressure and vapor stress and tensile strength of concrete. Many factors can induce the explosive spalling, therefore, it is necessary to continue a further study on the method of calculating the pore pressure as the basic factor. Inhibition measures for explosive spalling are numerous and effective. As a single addition to HPC, the amount of polypropylene fiber(PPF)or steel fiber can be predicted differently by regression expressions. The relationship of the hybrid ratio is not reported when PPF and SF are mixed, and the PPF is the recommended addition to the high strength concrete after comprehensive comparison and analysis. Aiming to the new, existing high performance concrete structure and the ultra-high performance concrete, the design of explosive spalling is introduced to represent inhibition measures for the explosive spalling, which will be beneficial to bring about the inhibition effect in the initial stage of building design. For the high performance concrete structures with admixture for inhibition for explosive spalling, it is suggested that the further work should focus on mechanical behaviors of the structure under or after fire. But to the structure with external coating or posting measures for inhibition for explosive spalling, it is necessary to get further study and improve on the assembled and disassembled techniques and standardization constructions.

参考文献/References:


[1] ALI F.Is High Strength Concrete More Susceptible to Explosive Spalling than Normal Strength Concrete in Fire?[J].Fire and Materials,2002,26(3):127-130.
[2]XIE J R.Numerical Investigation of Eccentrically Loaded Tied High Strength Concrete Columns[D].Edmonton:University of Alberta,1994.
[3]KODUR V K R,WANG T C,CHENG F P.Predicting the Fire Resistance Behaviour of High Strength Concrete Columns[J].Cement and Concrete Composites,2004,26(2):141-153.
[4]RAUT N K,KODUR V K R.Response of High-strength Concrete Columns Under Design Fire Exposure[J].Journal of Structural Engineering,2011,137(1):69-79.
[5]JGJ/T 281—2012,高强混凝土应用技术规程[S].
JGJ/T 281—2012,Technical Specification for Application of High Strength Concrete[S].
[6]肖建庄.可持续混凝土结构导论[M].北京:科学出版社,2017.
XIAO Jian-zhuang.An Introduction to Sustainable Concrete Structures[M].Beijing:Science Press,2017.
[7]XIAO J Z,XIE Q H,LI Z W,et al.Fire Resistance and Post-fire Seismic Behavior of High Strength Concrete Shear Walls[J].Fire Technology,2017,53(1):65-86.
[8]KODUR V K R,DWAIKAT M B.Fire-induced Spalling in Reinforced Concrete Beams[J].Proceedings of the Institution of Civil Engineers — Structures and Buildings,2012,165(7):347-359.
[9]DWAIKAT M B,KODUR V K R.Fire Induced Spalling in High Strength Concrete Beams[J].Fire Technology,2010,46(1):251-274.
[10]BEHNOOD A,GHANDEHARI M.Comparison of Compressive and Splitting Tensile Strength of High-strength Concrete with and Without Polypropylene Fibers Heated to High Temperatures[J].Fire Safety Journal,2009,44(8):1015-1022.
[11]WU B,ZHOU H,TANG G H,et al.Fire Resistance of Reinforced Concrete Columns with Square Cross Section[J].Advances in Structural Engineering,2009,10(4):353-369.
[12]KIM G Y,KIM Y S,LEE T G.Mechanical Properties of High-strength Concrete Subjected to High Temperature by Stressed Test[J].Transactions of Nonferrous Metals Society of China,2009,19:128-133.
[13]KODUR V K R.Spalling in High Strength Concrete Exposed to Fire-concerns,Causes,Critical Parameters and Cures[C]//ASCE.Proceedings of ASCE Structures Congress 2000.Philadelphia:ASCE,2000:1-8.
[14]KODUR V K R.Strategies for Improving the Performance of High-strength Concrete Columns Under Fire Hazard[J].Structural Control and Health Monitoring,2008,15(6):921-938.
[15]ALI F A,O’CONNOR D,ABUTAIR A.Explosive Spalling of High-strength Concrete Columns in Fire[J].Magazine of Concrete Research,2001,53(3):197-204.
[16]CZOBOLY O,LUBLOYE,HLAVICKA V,et al.Fibers and Fiber Cocktails to Improve Fire Resistance of Concrete[J].Journal of Thermal Analysis and Calorimetry,2017,128(3):1453-1461.
[17]KHOURY G A.Passive Fire Protection of Concrete Structures[J].Structures and Buildings,2008,161(3):135-145.
[18]PHAN L T,LAWSON J R,DAVIS F L.Effects of Elevated Temperature Exposure on Heating Characteristics,Spalling,and Residual Properties of High Performance Concrete[J].Materials and Structures,2001,34(2):83-91.
[19]KHOURY G A,MAJORANA C E,PESAVENTO F,et al.Modelling of Heated Concrete[J].Magazine of Concrete Research,2002,54(2):77-101.
[20]SCHREFLER B A,MAJORANA C E,KHOURY G A,et al.Thermo-hydro-mechanical Modelling of High Performance Concrete at High Temperatures[J].Engineering Computations,2002,19(7):787-819.
[21]HERTZ K D.Limits of Spalling of Fire-exposed Concrete[J].Fire Safety Journal,2003,38(2):103-116.
[22]吴 波,袁 杰,李 惠,等.高温下高强混凝土的爆裂规律与柱截面温度场计算[J].自然灾害学报,2002,11(2):65-69.
WU Bo,YUAN Jie,LI Hui,et al.Explosive Spalling Rules of High Strength Concrete Under High Temperature and Calculation for Temperature Field of Column Cross Section[J].Journal of Natural Disasters,2002,11(2):65-69.
[23]XIAO J Z,XIE Q H,HOU Y Z,et al.Reliability Analysis of High-strength Concrete Columns During a Fire[J].Key Engineering Materials,2015,629-630:273-278.
[24]KODUR V K R,CHENG F P,WANG T C,et al.Effect of Strength and Fiber Reinforcement on Fire Resistance of High-strength Concrete Columns[J].Journal of Structural Engineering,2003,129(2):253-259.
[25]KODUR V K R.Guidelines for Fire Resistance Design of High-strength Concrete Columns[J].Journal of Fire Protection Engineering,2005,15(2):93-106.
[26]MAJORANA C E,SALOMONI V A,MAZZUCCO G,et al.An Approach for Modelling Concrete Spalling in Finite Strains[J].Mathematics and Computers in Simulation,2010,80(8):1694-1712.
[27]PHAN L T,CARINO N J.Effects of Test Conditions and Mixture Proportions on Behavior of High-strength Concrete Exposed to High Temperatures[J].ACI Materials Journal,2002,99(1):54-66.
[28]NOUMOWE A N,SIDDIQUE R,DEBICKI G.Permeability of High-performance Concrete Subjected to Elevated Temperature(600 ℃)[J].Construction and Building Materials,2009,23(5):1855-1861.
[29]HARMATHY T Z.Effect of Moisture on the Fire Endurance of Building Elements[J].ASTM Special Technical Publication,1965,385:74-95.
[30]KALIFA P,MENNETEAU F D,QUENARD D.Spalling and Pore Pressure in HPC at High Temperatures[J].Cement and Concrete Research,2000,30(12):1915-1927.
[31]ZEIML M,LEITHNER D,LACKNER R,et al.How Do Polypropylene Fibers Improve the Spalling Behavior of In-situ Concrete?[J].Cement and Concrete Research,2006,36(5):929-942.
[32]DIEDERICHS U,JUMPPANEN U M,SCHNEIDER U.High Temperature Properties and Spalling Behaviour of High Strength Concrete[C]//SCHWESINGER P,WITTMANN F H.Proceedings of the Fourth Weimar Workshop on High Performance Concrete.Weimar:HAB,1995:219-235.
[33]BAZANT Z P.Analysis of Pore Pressure,Thermal Stresses and Fracture in Rapidly Heated Concrete[C]//PHAN L,CARINO N,DUTHINH D,et al.Proceedings of International Workshop on Fire Performance of High-strength Concrete(NIST Special Publication 919).Gaithersburg:NIST,1997:155-164.
[34]ULM F J,COUSSY O,BAZANT Z P.The “Chunnel” Fire.I:Chemoplastic Softening in Rapidly Heated Concrete[J].Journal of Engineering Mechanics,1999,125(3):272-281.
[35]ULM F J,ACKER P,LEVY M.The “Chunnel” Fire.Ⅱ:Analysis of Concrete Damage[J].Journal of Engineering Mechanics,1999,125(3):283-289.
[36]FU Y F,WONG Y L,TANG C A,et al.Thermal Induced Stress and Associated Cracking in Cement-based Composite at Elevated Temperatures — Part I:Thermal Cracking Around Single Inclusion[J].Cement and Concrete Composites,2004,26(2):99-111.
[37]FU Y F,WONG Y L,POON C S,et al.Numerical Tests of Thermal Cracking Induced by Temperature Gradient in Cement-based Composites Under Thermal Loads[J].Cement & Concrete Composites,2007,29(2):103-116.
[38]傅宇方,黄玉龙,潘智生,等.高温条件下混凝土爆裂机理研究进展[J].建筑材料学报,2006,9(3):323-329.
FU Yu-fang,WONG Yuk-lung,POON Chi-sun,et al.Literature Review of Study on Mechanism of Explosive Spalling in Concrete at Elevated Temperatures[J].Journal of Building Materials,2006,9(3):323-329.
[39]FU Y F,LI L C.Study on Mechanism of Thermal Spalling in Concrete Exposed to Elevated Temperatures[J].Materials and Structures,2011,44(1):361-376.
[40]KHOURY G A.Polypropylene Fibres in Heated Concrete.Part 2:Pressure Relief Mechanisms and Modelling Criteria[J].Magazine of Concrete Research,2008,60(3):189-204.
[41]高宇剑.高强混凝土火灾后力学性能退化及高温爆裂机理研究[D].徐州:中国矿业大学,2014.
GAO Yu-jian.Study on the Mechanical Performance Degradation and Spalling Mechanism of High Strength Concrete Exposed to Fire[D].Xuzhou:China University of Mining and Technology,2014.
[42]PENG G F,JIANG Y C,LI B H,et al.Effect of High Temperature on Normal-strength High-performance Concrete[J].Materials Research Innovations,2014,18(S2):290-293.
[43]KLINGSCH E W H.Explosive Spalling of Concrete in Fire[D].Zurich:Swiss Federal Institute of Technology,2014.
[44]HERTZ K D,SORENSEN L S.Test Method for Spalling of Fire Exposed Concrete[J].Fire Safety Journal,2005,40(5):466-476.
[45]CHAN Y N,PENG G F,ANSON M.Fire Behavior of High-performance Concrete Made with Silica Fume at Various Moisture Contents[J].ACI Materials Journal,1999,96(3):405-409.
[46]CHAN Y N,PENG G F,ANSON M.Residual Strength and Pore Structure of High-strength Concrete and Normal Strength Concrete After Exposure to High Temperatures[J].Cement and Concrete Composites,1999,21(1):23-27.
[47]朋改非,陈延年,MIKE Anson.高性能硅灰混凝土的高温爆裂与抗火性[J].建筑材料学报,1999,2(3):193-198.
PENG Gai-fei,CHAN Yan-nian,MIKE Anson.Explosive Spalling Thermally Induced and Fire Property of High Performance Silica Fume Concrete[J].Journal of Building Materials,1999,2(3):193-198.
[48]BIAN S H,PENG G F,ZHAO Z L,et al.Effect of Various Moisture Contents,Variety and Dosage of Fibers on Explosive Spalling and Residual Compressive Strength of High Performance Concrete Subjected to High Temperatures[J].Key Engineering Materials,2006,302-303:618-623.
[49]TERRASI G P,BISBY L,BARBEZAT M.Fire Behavior of Thin CFRP Pretensioned High-strength Concrete Slabs[J].Journal of Composites for Construction,2012,16(4):381-394.
[50]KODUR V,MCGRATH R.Fire Endurance of High Strength Concrete Columns[J].Fire Technology,2003,39(1):73-87.
[51]SULLIVAN P J E.A Probabilistic Method of Testing for the Assessment of Deterioration and Explosive Spalling of High Strength Concrete Beams in Flexure at High Temperature[J].Cement and Concrete Composites,2004,26(2):155-162.
[52]DWAIKAT M B,KODUR V K R.Hydrothermal Model for Predicting Fire-induced Spalling in Concrete Structural Systems[J].Fire Safety Journal,2009,44(3):425-434.
[53]陶 津,柳 献,袁 勇,等.自密实混凝土高温爆裂性能影响因素的试验研究[J].土木工程学报,2009,42(10):22-26.
TAO Jin,LIU Xian,YUAN Yong,et al.Experimental Study of Factors Affecting the Spalling of Self-compacting Concrete Under High Temperatures[J].China Civil Engineering Journal,2009,42(10):22-26.
[54]DWAIKAT M B,KODUR V K R.Response of Restrained Concrete Beams Under Design Fire Exposure[J].Journal of Structural Engineering,2009,135(11):1408-1417.
[55]BILODEAU A,KODUR V K R,HOFF G C.Optimization of the Type and Amount of Polypropylene Fibres for Preventing the Spalling of Lightweight Concrete Subjected to Hydrocarbon Fire[J].Cement and Concrete Composites,2004,26(2):163-174.
[56]KODUR V K R,MCGRATH R.Effect of Silica Fume and Lateral Confinement on Fire Endurance of High Strength Concrete Columns[J].Canadian Journal of Civil Engineering,2006,33(1):93-102.
[57]KODUR V K R,SULTAN M A.Structural Behaviour of High Strength Concrete Columns Exposed to Fire[C]//NRCC.International Symposium on High Performance and Reactive Powder Concrete.Sherbrooke:NRCC,1998:217-232.
[58]SHAKYA A M,KODUR V K R.Response of Precast Prestressed Concrete Hollowcore Slabs Under Fire Conditions[J].Engineering Structures,2015,87:126-138.
[59]YAN X,LI H,WONG Y L.Effect of Aggregate on High-strength Concrete in Fire[J].Magazine of Concrete Research,2007,59(5):323-328.
[60]BASTAMI M,CHABOKI-KHIABANI A,BAGHBADRANI M,et al.Performance of High Strength Concretes at Elevated Temperatures[J].Scientia Iranica,2011,18(5):1028-1036.
[61]KANEMA M,PLIYA P,NOUMOWE A,et al.Spalling,Thermal,and Hydrous Behavior of Ordinary and High-strength Concrete Subjected to Elevated Temperature[J].Journal of Materials in Civil Engineering,2011,23(7):921-930.
[62]PHAN L T.Pore Pressure and Explosive Spalling in Concrete[J].Materials and Structures,2008,41(10):1623-1632.
[63]FELICETTI R,MONTE F L.Concrete Spalling:Interaction Between Tensile Behaviour and Pore Pressure During Heating[C]//EDP Sciences.METEC Web of Conferences 6.Paris:EDP Sciences,2013:03001.
[64]MINDEGUIA J C,PIMIENTA P,NOUMOWE A,et al.Temperature,Pore Pressure and Mass Variation of Concrete Subjected to High Temperature — Experimental and Numerical Discussion on Spalling Risk[J].Cement and Concrete Research,2010,40(3):477-487.
[65]JANSSON R,BOSTROM L.The Influence of Pressure in the Pore System on Fire Spalling of Concrete[J].Fire Technology,2010,46(1):217-230.
[66]高丹盈,李 晗,杨 帆.聚丙烯-钢纤维增强高强混凝土高温性能[J].复合材料学报,2013,30(1):187-193.
GAO Dan-ying,LI Han,YANG Fan.Performance of Polypropylene-steel Hybrid Fiber Reinforced Concrete After Being Exposed to High Temperature[J].Acta Materiae Compositae Sinica,2013,30(1):187-193.
[67]KO J,RYU D,NOGUCHI T.The Spalling Mechanism of High-strength Concrete Under Fire[J].Magazine of Concrete Research,2011,63(5):357-370.
[68]KODUR V,RAUT N.A Simplified Approach for Predicting Fire Resistance of Reinforced Concrete Columns Under Biaxial Bending[J].Engineering Structures,2012,41:428-443.
[69]RAUT N.Response of High Strength Concrete Columns Under Fire-induced Biaxial Bending[D].Ann Arbor:Michigan State University,2011.
[70]罗俊礼,徐志胜,郭信君,等.隧道衬砌混凝土管片高温爆裂及火灾损伤试验研究[J].安全与环境学报,2013,13(5):159-164.
LUO Jun-li,XU Zhi-sheng,GUO Xin-jun,et al.Experimental Study on the Explosive Spalling and Fire Damage of the Lining Segment in Tunnel Construction[J].Journal of Safety and Environment,2013,13(5):159-164.
[71]ALI F,NADJAI A,SILCOCK G,et al.Outcomes of a Major Research on Fire Resistance of Concrete Columns[J].Fire Safety Journal,2004,39(6):433-445.
[72]BOSNJAK J,OZBOLT J,HAHN R.Permeability Measurement on High Strength Concrete Without and with Polypropylene Fibers at Elevated Temperatures Using a New Test Setup[J].Cement and Concrete Research,2013,53:104-111.
[73]肖建庄.高性能混凝土结构抗火设计原理[M].北京:科学出版社,2015.
XIAO Jian-zhuang.Fire Safety Design Principle of High-performance Concrete Structures[M].Beijing:Science Press,2015.
[74]CREE D,PLIYA P,GREEN M F,et al.Thermal Behaviour of Unstressed and Stressed High Strength Concrete Containing Polypropylene Fibers at Elevated Temperature[J].Journal of Structural Fire Engineering,2017,8(4):402-417.
[75]BENTZ D P.Fibers,Percolation,and Spalling of High Performance Concrete[J].ACI Materials Journal,2000,97(3):351-359.
[76]KALIFA P,CHENE G,GALLE C.High-temperature Behaviour of HPC with Polypropylene Fibres:From Spalling to Microstructure[J].Cement and Concrete Research,2001,31(10):1487-1499.
[77]LIU X,YE G,DE SCHUTTER G,et al.On the Mechanism of Polypropylene Fibres in Preventing Fire Spalling in Self-compacting and High-performance Cement Paste[J].Cement and Concrete Research,2008,38(4):487-499.
[78]YE G,LIU X,DE SCHUTTER G,et al.Phase Distribution and Microstructural Changes of Self-compacting Cement Paste at Elevated Temperature[J].Cement and Concrete Research,2007,37(6):978-987.
[79]柳 献,袁 勇,叶 光,等.高性能混凝土高温爆裂的机理探讨[J].土木工程学报,2008,41(6):61-68.
LIU Xian,YUAN Yong,YE Guang,et al.Investigation on the Mechanism of Explosive Spalling of High Performance Concrete at Elevated Temperatures[J].China Civil Engineering Journal,2008,41(6):61-68.
[80]肖建庄,王 平.掺聚丙烯纤维高性能混凝土高温后的抗压性能[J].建筑材料学报,2004,7(3):281-285.
XIAO Jian-zhuang,WANG Ping.Study on Compressive Behavior of HPC with PP Fiber at Elevated Temperature[J].Journal of Building Materials,2004,7(3):281-285.
[81]CHEN B,LIU J Y.Residual Strength of Hybrid-fiber-reinforced High-strength Concrete After Exposure to High Temperatures[J].Cement and Concrete Research,2004,34(6):1065-1069.
[82]XIAO J Z,FALKNER H.On Residual Strength of High-performance Concrete with and Without Polypropylene Fibers at Elevated Temperatures[J].Fire Safety Journal,2006,41:115-121.
[83]PENG G F,YANG W W,ZHAO J,et al.Explosive Spalling and Residual Mechanical Properties of Fiber-toughened High-performance Concrete Subjected to High Temperatures[J].Cement and Concrete Research,2006,36(4):723-727.
[84]刘沐宇,林志威,丁庆军,等.不同PPF掺量的高性能混凝土高温后性能研究[J].华中科技大学学报:城市科学版,2007,24(2):14-17.
LIU Mu-yu,LIN Zhi-wei,DING Qing-jun,et al.Study on the Properties of High Performance Concrete with Different Content Polypropylene Fiber After High Temperature[J].Journal of Huazhong University of Science and Technology:Urban Science Edition,2007,24(2):14-17.
[85]YAN R Z,DU H X,WANG H F,et al.Behavior of HSC with Polypropylene Fibers After Exposure to High Temperatures[J].Applied Mechanics and Materials,2011,99-100:994-999.
[86]PLIYA P,BEAUCOUR A L,NOUMOWE A.Contribution of Cocktail of Polypropylene and Steel Fibres in Improving the Behaviour of High Strength Concrete Subjected to High Temperature[J].Construction and Building Materials,2011,25(4):1926-1934.
[87]CIFUENTES H,LEIVA C,MEDINA F,et al.Effects of Fibres and Rice Husk Ash on Properties of Heated HSC[J].Magazine of Concrete Research,2012,64(5),457-470.
[88]KHALIQ W,KODUR V.Behavior of High Strength Fly Ash Concrete Columns Under Fire Conditions[J].Materials and Structures,2013,46(5):857-867.
[89]MUGUME R B,HORIGUCHI T.Prediction of Spalling in Fibre-reinforced High Strength Concrete at Elevated Temperatures[J].Materials and Structures,2014,47(4):591-604.
[90]SUHAENDI S L,HORIGUCHI T.Effect of Short Fibers on Residual Permeability and Mechanical Properties of Hybrid Fibre Reinforced High Strength Concrete After Heat Exposition[J].Cement and Concrete Research,2006,36(9):1672-1678.
[91]陈明阳,侯晓萌,郑文忠,等.混凝土高温爆裂临界温度和防爆裂纤维掺量研究综述与分析[J].建筑结构学报,2017,38(1):161-170.
CHEN Ming-yang,HOU Xiao-meng,ZHENG Wen-zhong,et al.Review and Analysis on Spalling Critical Temperature of Concrete and Fibers Dosage to Prevent Spalling at Elevated Temperatures[J].Journal of Building Structures,2017,38(1):161-170.
[92]LIE T T,KODUR V K R.Thermal and Mechanical Properties of Steel-fibre-reinforced Concrete at Elevated Temperatures[J].Canadian Journal of Civil Engineering,1996,23(2):511-517.
[93]QIAN C X,STROEVEN P.Development of Hybrid Polypropylene-steel Fibre-reinforced Concrete[J].Cement and Concrete Research,2000,30(1):63-69.
[94]LUO X,SUN W,CHAN S Y N.Effect of Heating and Cooling Regimes on Residual Strength and Microstructure of Normal Strength and High-performance Concrete[J].Cement and Concrete Research,2000,30(3):379-383.
[95]朋改非,段旭杰,黄广华.钢纤维对高性能混凝土高温爆裂行为的抑制作用[C]//中国土木工程学会.“全国特种混凝土技术及工程应用”学术交流会暨2008年混凝土质量专业委员会年会论文集.北京:中国土木工程学会,2008:566-571.
PENG Gai-fei,DUAN Xu-jie,HUANG Guang-hua.Inhibitory Effect of Steel Fiber on High Performance Concrete Spalling Behavior[C]//China Civil Engineering Society.Proceedings of National Academic Exchange Conference on Special Concrete Technology and Engineering Application and 2008 Annual Meeting of Concrete Quality Professional Committee.Beijing:China Civil Engineering Society,2008:566-571.
[96]REIS M D L B C,NEVES I C,TADEU A J B,et al.High-temperature Compressive Strength of Steel Fiber High-strength Concrete[J].Journal of Materials in Civil Engineering,2001,13(3):230-234.
[97]KHALIQ W,KODUR V.Effectiveness of Polypropylene and Steel Fibers in Enhancing Fire Resistance of High-strength Concrete Columns[J].Journal of Structural Engineering,2018,144(3):04017224.
[98]OZAWA M,MORIMOTO H.Effects of Various Fibres on High-temperature Spalling in High-performance Concrete[J].Construction and Building Materials,2014,71:83-92.
[99]AKTURK B,YUZER N,KABAY N.Usability of Raw Rice Husk Instead of Polypropylene Fibers in High-strength Concrete Under High Temperature[J].Journal of Materials in Civil Engineering,2016,28(1):04015072.
[100]HERNANDEZ-OLIVARES F,BARLUENGA G.Fire Performance of Recycled Rubber-filled High-strength Concrete[J].Cement and Concrete Research,2004,34(1):109-117.
[101]刘 锋,张文杰,何东明,等.橡胶粉-纤维改性高强混凝土的高温性能[J].建筑材料学报,2011,14(1):124-131.
LIU Feng,ZHANG Wen-jie,HE Dong-ming,et al.High Temperature Performance of High Strength Concrete Modified by Rubber Powder and Fiber[J].Journal of Building Materials,2011,14(1):124-131.
[102]李丽娟,谢伟锋,刘 锋,等.高温作用后高强橡胶混凝土的性能研究[J].建筑材料学报,2007,10(6):692-698.
LI Li-juan,XIE Wei-feng,LIU Feng,et al.High Temperature Performance of High Strength Rubber Concrete[J].Journal of Building Materials,2007,10(6):692-698.
[103]LI L J,XIE W F,LIU F,et al.Fire Performance of High Strength Concrete Reinforced with Recycled Rubber Particles[J].Magazine of Concrete Research,2011,63(3):187-195.
[104]周 梅,沈梦阳,张 倩.橡胶集料高强混凝土高温前后性能研究[J].工业建筑,2017,43(1):113-117.
ZHOU Mei,SHEN Meng-yang,ZHANG Qian.Study of the Behavior of High Strength Concrete Modified with Rubber Fine Aggregate Before and After High Temperature[J].Industrial Construction,2017,43(1):113-117.
[105]POON C S,AZHAR S,ANSON M,et al.Comparison of the Strength and Durability Performance of Normal-and High-strength Pozzolanic Concretes at Elevated Temperatures[J].Cement and Concrete Research,2001,31(9):1291-1300.
[106]BANGI M R,HORIGUCHI T.Pore Pressure Development in Hybrid Fibre-reinforced High Strength Concrete at Elevated Temperatures[J].Cement and Concrete Research,2011,41(11):1150-1156.
[107]DONG X J,DING Y N,WANG T F.Spalling and Mechanical Properties of Fiber Reinforced High-performance Concrete Subjected to Fire[J].Journal of Wuhan University of Technology:Materials Science Edition,2008,23(5):743-749.
[108]PENG G F,BIAN S H,GUO Z Q,et al.Effect of Thermal Shock Due to Rapid Cooling on Residual Mechanical Properties of Fiber Concrete Exposed to High Temperatures[J].Construction and Building Materials,2008,22(5):948-955.
[109]KODUR V K R,RAUT N K,MAO X Y,et al.Simplified Approach for Evaluating Residual Strength of Fire-exposed Reinforced Concrete Columns[J].Materials and Structures,2013,46(12):2059-2075.
[110]YERMAK N,PLIYA P,BEAUCOUR A L,et al.Influence of Steel and/or Polypropylene Fibres on the Behaviour of Concrete at High Temperature:Spalling,Transfer and Mechanical Properties[J].Construction and Building Materials,2017,132:240-250.
[111]鞠丽艳,张 雄.混杂纤维对高性能混凝土高温性能的影响[J].同济大学学报:自然科学版,2006,34(1):89-92,101.
JU Li-yan,ZHANG Xiong.Effects of Hybrid Fiber on High Performance Concrete Properties Under High Temperature[J].Journal of Tongji University:Natural Science,2006,34(1):89-92,101.
[112]YAN Z G,SHEN Y,ZHU H H,et al.Experimental Investigation of Reinforced Concrete and Hybrid Fibre Reinforced Concrete Shield Tunnel Segments Subjected to Elevated Temperature[J].Fire Safety Journal,2015,71:86-99.
[113]LURA P,TERRASI G P.Reduction of Fire Spalling in High-performance Concrete by Means of Superabsorbent Polymers and Polypropylene Fibers:Small Scale Fire Tests of Carbon Fiber Reinforced Plastic-prestressed Self-compacting Concrete[J].Cement and Concrete Composites,2014,49:36-42.
[114]HEO Y S,SANJAYAN J G,HAN C G,et al.Synergistic Effect of Combined Fibers for Spalling Protection of Concrete in Fire[J].Cement and Concrete Research,2010,40(10):1547-1554.
[115]WITEK A,GAWIN D,PESAVENTO F,et al.Finite Element Analysis of Various Methods for Protection of Concrete Structures Against Spalling During Fire[J].Computational Mechanics,2006,39(3):271-292.
[116]钱春香,游有鲲.抑制高强混凝土受火爆裂的措施[J].硅酸盐学报,2005,33(7):846-852.
QIAN Chun-xiang,YOU You-kun.Measures for Improving Spalling Resistance of High Strength Concrete Exposed to Fire[J].Journal of the Chinese Ceramic Society,2005,33(7):846-852.
[117]吴 波,周 鹏.表面设置防火涂料高强混凝土的爆裂[J].建筑材料学报,2011,14(3):406-412.
WU Bo,ZHOU Peng.Explosive Spalling of High Strength Concrete Coated with Fire Retardation Coating at High Temperatures[J].Journal of Building Materials,2011,14(3):406-412.
[118]RYDER N L,WOLIN D W,MILKE J A.An Investigation of the Reduction in Fire Resistance of Steel Columns Caused by Loss of Spray-applied Fire Protection[J].Journal of Fire Protection Engineering,2002,12(1):31-44.
[119]吴 波,周 鹏,吴耀鹏.防火涂料对高强混凝土高温后氯离子渗透性影响[J].湖南大学学报:自然科学版,2013,40(1):9-14.
WU Bo,ZHOU Peng,WU Yao-peng.Influence of Fire Insulation on the Chloride Ion Permeability of High Strength Concrete After High Temperature[J].Journal of Hunan University:Natural Sciences,2013,40(1):9-14.
[120]肖建庄,侯一钊,谢青海.高强混凝土剪力墙抗火性能试验研究[J].建筑结构学报,2015,36(12):91-98.
XIAO Jian-zhuang,HOU Yi-zhao,XIE Qing-hai.Experimental Study on Fire Resistant Behavior of HSC Shear Walls[J].Journal of Building Structures,2015,36(12):91-98.
[121]吴 波,李 杰,黄玉龙,等.不同饰面材料高强混凝土柱的耐火性能[J].华南理工大学学报:自然科学版,2009,37(3):120-126,131.
WU Bo,LI Jie,WONG Yuk-lung,et al.Fire-resistant Performance of High-strength Concrete Columns with Different Decorative Materials[J].Journal of South China University of Technology:Natural Science Edition,2009,37(3):120-126,131.
[122]CHUNG J H,CONSOLAZIO G R.Numerical Modeling of Transport Phenomena in Reinforced Concrete Exposed to Elevated Temperatures[J].Cement and Concrete Research,2005,35(3):597-608.
[123]吴 波,宿晓萍,李 惠,等.高温后约束高强混凝土力学性能的试验研究[J].土木工程学报,2002,35(2):26-32.
WU Bo,SU Xiao-ping,LI Hui,et al.Experimental Study on Mechanical Properties of Confined High-strength Concrete After High Temperature[J].China Civil Engineering Journal,2002,35(2):26-32.
[124]HAN C G,HAN M C,HEO Y S.Improvement of Residual Compressive Strength and Spalling Resistance of High-strength RC Columns Subjected to Fire[J].Construction and Building Materials,2009,23(1):107-116.
[125]KODUR V,BISBY L A,GREEN M F.Experimental Evaluation of the Fire Behaviour of Insulated Fibre-reinforced-polymer-strengthened Reinforced Concrete Columns[J].Fire Safety Journal,2006,41(7):547-557.
[126]XIAO J Z,LI J,JIANG F.Research on the Seismic Behavior of HPC Shear Walls After Fire[J].Materials and Structures,2004,37(8):506-512.

相似文献/References:

[1]张云清,余红发,王甲春.气泡特征对混凝土抗盐冻性能的影响[J].建筑科学与工程学报,2011,28(03):83.
　ZHANG Yun-qing,YU Hong-fa,WANG Jia-chun.Effect of Air-bubble Characteristics on Salt Frost Resistance of Concrete[J].Journal of Architecture and Civil Engineering,2011,28(03):83.
[2]马丽娜,贡金鑫,赵艳华.高性能混凝土约束收缩对氯离子扩散的影响[J].建筑科学与工程学报,2017,34(06):85.
　MA Li-na,GONG Jin-xin,ZHAO Yan-hua.Influence of Constrained Shrinkage Cracking on Chloride Ion Diffusivity of High Performance Concrete[J].Journal of Architecture and Civil Engineering,2017,34(03):85.
[3]肖建庄,陈德银,查全.高性能混凝土简支梁正截面的抗弯疲劳性能[J].建筑科学与工程学报,2008,25(01):96.
　XIAO Jian-zhuang,CHEN De-yin,ZHA Quan-fan.Bending Fatigue Behavior of High-performance Concrete Simply-supported Beams[J].Journal of Architecture and Civil Engineering,2008,25(03):96.

备注/Memo

备注/Memo:
收稿日期:2018-12-21
作者简介:肖建庄(1968-),男,山东沂南人,教授,博士研究生导师,工学博士,E-mail:jzx@tongji.edu.cn。
更新日期/Last Update: 2019-05-23