«上一篇/Previous Article|本期目录/Table of Contents|下一篇/Next Article»

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:

37卷

期数:

2020年04期

页码:

42-51

栏目:

出版日期:

2020-07-30

文章信息/Info

Title:

Analysis of Bending Performance of Inner and Outer Flange Connections of Circular Concrete-filled Double Skin Steel Tubular Member

文章编号:

1673-2049(2020)04-0042-10

作者:

王文达,易练波,范家浩

(兰州理工大学 土木工程学院,甘肃 兰州 730050)

Author(s):

WANG Wen-da, YI Lian-bo, FAN Jia-hao

(School of Civil Engineering, Lanzhou University of Technology, Lanzhou 730050, Gansu, China)

关键词:

法兰连接;  中空夹层圆钢管混凝土构件;  受弯性能;  旋转轴;  最大螺栓拉力

Keywords:

flange connection;  circular concrete-filled double skin steel tubular member;  bending performance;  rotation axis;  maximum bolt tension

分类号:

TU398

DOI:

10.19815/j.jace.2019.10035

文献标志码:

A

摘要:

为研究中空夹层圆钢管混凝土内外法兰连接的受弯性能,用ABAQUS软件建立了该节点的力学模型,分析了中空夹层圆钢管混凝土内外法兰节点受弯时节点中和轴和旋转轴的位置,并分析了内外法兰错开间距、螺栓预紧力、空心率、法兰板厚度、混凝土强度、螺栓内外边距比值等参数对节点极限承载力、最大螺栓拉力的影响。结果表明:节点的中和轴和旋转轴随弯矩变化,在外法兰板底端最大螺栓屈服前,旋转轴位置大约为0.6R(R为外钢管半径),并且节点的中和轴和旋转轴不在同一截面; 外圈最大螺栓拉力随法兰板厚度、内外法兰错开间距、螺栓内外边距比值增大而减小,随空心率、螺栓预紧力增大而增大; 混凝土强度对最大螺栓拉力影响不大,可以不作为主要参数进行分析。

Abstract:

In order to study the bending performance of the inner and outer flange connections of the circular concrete-filled double skin steel tube, the mechanical model of the joint was established using ABAQUS software. The positions of the neutral axis and the rotation axis of the joint when the inner and outer flange connections of the circular concrete-filled double skin steel tube were bent were analyzed. The influences of the parameters such as the inner and outer flange stagger distance, bolt pre-tightening force, hollow ratio, flange thickness, concrete strength, bolt inner and outer margin ratio on the ultimate bearing capacity of the joint and the maximum bolt tension were analyzed. The results show that the neutral axis and rotation axis of the joint change with the bending moment. Before the maximum bolt at the bottom of the outer flange plate yields, the position of the rotation axis is approximately 0.6R(R is outer steel pipe radius), and the neutral axis and rotation axis of joint are not in the same section. The maximum bolt tension decreases with the increase of the thickness of flange plate, the inner and outer flange staggered distance, and the bolt inner and outer margin ratio. It increases with the increase of the hollow ratio and the bolt pre-tightening force. Concrete strength has little effect on the maximum bolt tension, so it can not be used as the main parameter for analysis.

参考文献/References:

[1] 史艳莉,张 宸,王景玄,等.圆锥形中空夹层钢管混凝土压弯构件抗震性能[J].建筑科学与工程学报,2019,36(5):80-88.
SHI Yan-li,ZHANG Chen,WANG Jing-xuan,et al.Seismic Behavior of Tapered Concrete-filled Double Skin Steel Tube Compression-bending Members[J].Journal of Architecture and Civil Engineering,2019,36(5):80-88.
[2]王文达,张超峰,王景玄,等.圆锥形中空夹层钢管混凝土轴压短柱受力机理分析[J].建筑科学与工程学报,2019,36(3):37-45.
WANG Wen-da,ZHANG Chao-feng,WANG Jing-xuan,et al.Analysis on Mechanical Behavior of Tapered Concrete-filled Double Steel Tubular Short Columns Under Axial Compression[J].Journal of Architecture and Civil Engineering,2019,36(3):37-45.
[3]黄 宏,陶 忠,韩林海.圆中空夹层钢管混凝土柱轴压工作机理研究[J].工业建筑,2006,36(11):11-14,36.
HUANG Hong,TAO Zhong,HAN Lin-hai.Mechanism of Concrete-filled Double-skin Steel Tubular Columns(CHS Inner and CHS Outer)Subjected to Axial Compression[J].Industrial Construction,2006,36(11):11-14,36.
[4]WANG Y Q,ZONG L,SHI Y J.Bending Behavior and Design Model of Bolted Flange-plate Connection[J].Journal of Constructional Steel Research,2013,84:1-16.
[5]DENG H Z,SONG X Q,CHEN Z H,et al.Experiment and Design Methodology of a Double-layered Flange Connection in Axial Loads[J].Engineering Structures,2018,175:436-456.
[6]邓洪洲,黄 誉,金晓华.钢管塔新型内外法兰节点试验研究与有限元分析[J].建筑结构学报,2009,30(5):140-148.
DENG Hong-zhou,HUANG Yu,JIN Xiao-hua.Experimental Research and Finite Element Analysis on a New-type Flange Joint Used in Steel Tube Towers[J].Journal of Building Structures,2009,30(5):140-148.
[7]陈 哲,邢月龙,郭 勇,等.中空夹层钢管混凝土刚性双层法兰受弯性能试验研究[J].钢结构,2015,30(7):6-11,18.
CHEN Zhe,XING Yue-long,GUO Yong,et al.Experimental Study on Flexural Performance of Rigid Double-ring Flange Connected to Concrete-filled Double-skin Steel Tube[J].Steel Construction,2015,30(7):6-11,18.
[8]黄 誉,邓洪洲,金晓华.钢管杆塔新型内外法兰受弯性能试验研究及有限元分析[J].建筑结构学报,2011,32(10):73-81.
HUANG Yu,DENG Hong-zhou,JIN Xiao-hua.Experimental Research and Finite Element Analysis on Flexural Performance of Innovative Flange Joint Used in Steel Poles[J].Journal of Building Structures,2011,32(10):73-81.
[9]陈 勇,陈 聪,薛 滨,等.不同偏心距下内外刚性法兰压弯承载力性能试验研究[J].钢结构,2017,32(3):16-22.
CHEN Yong,CHEN Cong,XUE Bin,et al.Experimental Study of the Bearing Capacity of Internal-external Flange Joints Subjected to Pressure and Bending Loading with Various Eccentricities[J].Steel Construction,2017,32(3):16-22.
[10]薛 滨,陈 勇,陈 聪,等.拉弯荷载下钢管杆塔内外法兰设计计算方法[J].工程力学,2017,34(10):76-86.
XUE Bin,CHEN Yong,CHEN Cong,et al.Calculation Method for Design of Inner-and-outer Flange Joints Subjected to Tension and Bending Loads in Tubular Towers and Poles[J].Engineering Mechanics 2017,34(10):76-86.
[11]孙传琦,高志林,邢月龙,等.大跨越钢管塔内外法兰连接节点纯弯承载力特性试验研究[J].钢结构,2018,33(11):21-25,6.
SUN Chuan-qi,GAO Zhi-lin,XING Yue-long,et al.Experimental Research on the Bearing Capacity of Inner-outer Double Layered Flange of a Long-span Steel Tubular Tower Under Pure Bending[J].Steel Construction,2018,33(11):21-25,6.
[12]CAO J J,BELL A J.Determination of Bolt Forces in a Circular Flange Joint Under Tension Force[J].International Journal of Pressure Vessels and Piping,1996,68(1):63-71.
[13]黄 宏,陶 忠,韩林海.圆中空夹层钢管混凝土纯弯力学性能研究[J].工业建筑,2006,36(11):15-18,61.
HUANG Hong,TAO Zhong,HAN Lin-hai.Flexural Behavior of Concrete Filled Double-skin(CHS Inner and CHS Outer)Steel Tubes[J].Industrial Construction,2006,36(11):15-18,61.
[14]陈 聪.输电铁塔多环板加劲节点及内外双层法兰节点承载力研究[D].杭州:浙江大学,2017.
CHEN Cong.Research on Bearing Capacity of Multi- plates-reinforced Joint and Inner-and-outer Flange Joint in Transmission Tower[D].Hangzhou:Zhejiang University,2017.
[15]韩林海.钢管混凝土结构——理论与实践[M].3版.北京:科学出版社,2016.
HAN Lin-hai.Concrete Filled Steel Tubular Structures — Theory and Practice[M].3rd ed.Beijing:Science Press,2016.
[16]宗 亮,王元清,石永久.钢管结构法兰连接节点抗弯承载性能的有限元分析[J].中北大学学报:自然科学版,2011,32(4):431-436.
ZONG Liang,WANG Yuan-qing,SHI Yong-jiu.Finite Element Analysis of Load-carrying Properties of Flange-plate Connections of Steel Tubular Structures Under Bending Moment[J].Journal of North University of China:Natural Science Edition,2011,32(4):431-436.
[17]HUANG F,ZHANG D,HONG W,et al.Mechanism and Calculation Theory of Prying Force for Flexible Flange Connection[J].Journal of Constructional Steel Research,2017,132:97-107.
[18]石亦平,周玉蓉.ABAQUS有限元分析实例详解[M].北京:机械工业出版社,2006.
SHI Yi-ping,ZHOU Yu-rong.Detailed Explanation of ABAQUS Finite Element Example[M].Beijing:China Machine Press,2006.
[19]GB 50017—2017,钢结构设计标准[S].
GB 50017—2017,Standard for Design of Steel Structures[S].

相似文献/References:

备注/Memo

备注/Memo:

收稿日期:2019-10-23
基金项目:国家自然科学基金项目(51768038); 甘肃省高等学校协同创新团队项目(2018C-08)
作者简介:王文达(1976-),男,甘肃天水人,教授,博士研究生导师,工学博士,E-mail:wangwd@lut.edu.cn。

常用功能

更新日期/Last Update: 2020-07-29