«上一篇/Previous Article|本期目录/Table of Contents|下一篇/Next Article»

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:

38卷

期数:

2021年05期

页码:

1-14

栏目:

出版日期:

2021-09-15

文章信息/Info

Title:

Application and Development of 3D Printed Concrete Technology in China

文章编号:

1673-2049(2021)05-0001-14

作者:

肖建庄¹,柏美岩¹,唐宇翔¹,马义和²,陈 寒²,刘浩然¹

(1. 同济大学 土木工程学院,上海 200092; 2. 盈创建筑科技(上海)有限公司,上海 201799)

Author(s):

XIAO Jian-zhuang¹, BAI Mei-yan¹, TANG Yu-xiang¹, MA Yi-he², CHEN Han², LIU Hao-ran¹

(1. College of Civil Engineering, Tongji University, Shanghai 200092, China; 2. Yingchuang Building Technology(Shanghai)Co., Ltd, Shanghai 201799, China)

关键词:

3D打印混凝土;  生态材料;  基础设施;  智能建造

Keywords:

3D printed concrete;  ecological material;  infrastructure;  intelligent construction

分类号:

TU741

DOI:

10.19815/j.jace.2021.02055

文献标志码:

A

摘要:

为了全面分析中国3D打印混凝土技术的研究现状,从“油墨”材料、施工工艺和应用场景等方面对3D打印混凝土技术的研究进展进行了回顾,从时间和逻辑2条线路分析了该技术的发展历程,介绍了主要的施工工艺及在建筑物和基础设施上的应用案例,并分析了3D打印混凝土技术在生态“油墨”材料、仿生设计、大型打印设备开发及施工工艺、3D打印混凝土技术标准与验收规范等发展趋势。最后分析总结了目前中国3D打印混凝土技术所面临的问题,并结合实际应用场景给出了部分研究思路。结果表明:3D打印材料是影响混凝土性能最根本的因素,混凝土须具有更好的流变性能,并能够在环境中快速凝固; 现有3D打印混凝土设备还不能够完全满足不同应用环境的特殊性要求,需要在机械设计和施工流程方面进行协调开发,促进面向建筑领域新型3D打印设备的精细化与自动化发展; 3D打印混凝土结构和普通混凝土结构形式不同,现有的混凝土结构设计施工标准和国家规程并不适合3D打印混凝土技术,缺乏面向3D打印建筑的标准和验收规范; 企业、高校和科研机构需加强合作,以工程应用为导向指引3D打印混凝土的研究和发展。

Abstract:

In order to comprehensively analyze the research status of 3D printed concrete technology in China, the research progress of 3D printed concrete technology from the aspects of ink materials, construction technology and application scenarios was reviewed, and the development process of the technology was analyzed from two aspects of time and logic. The main construction technology and application cases in buildings and infrastructures were introduced. The development trend of 3D printed concrete technology in ecological ink materials, bionic design, large-scale printing equipment development and construction technology, and 3D printed concrete technical standards and acceptance specifications were analyzed. Finally, the problems of 3D printed concrete technology in China were analyzed and summarized, and some research ideas were given combined with practical application scenarios. The results show that 3D printed material is the most fundamental factor affecting the performance of concrete. Concrete must have better rheological properties and be able to set rapidly in the environment. The existing 3D printed concrete equipment can not fully meet the special requirements of different application environments. It is necessary to coordinate the development of mechanical design and construction process, so as to promote the refinement and automation development of new 3D printing equipment in the construction field. 3D printed concrete structure is different from ordinary concrete structure, so the existing concrete structure design and construction standards and national regulations are not suitable for 3D printed concrete technology, lacking standards and acceptance specifications for 3D printed buildings. Enterprises, universities and scientific research institutions need to strengthen cooperation to guide the research and development of 3D printed concrete oriented by the engineering application.

参考文献/References:

[1] LABONNOTE N,RONNQUIST A,MANUM B,et al.Additive Construction:State-of-the-art,Challenges and Opportunities[J].Automation in Construction,2016,72:347-366.
[2]DAMME V H.Concrete Material Science:Past,Present,and Future Innovations[J].Cement and Concrete Research,2018,112:5-24.
[3]WANGLER T,LLORET E,REITER L,et al.Digital Concrete:Opportunities and Challenges[J].RILEM Technical Letters,2016,1:67-75.
[4]WANGLER T,ROUSSEL N,BOS F P,et al.Digital Concrete:A Review[J].Cement and Concrete Research,2019,123:105780.
[5]ASTM F2792-12a,Standard Terminology for Additive Manufacturing Technologies[S].
[6]WU P,WANG J,WANG X Y.A Critical Review of the Use of 3-D Printing in the Construction Industry[J].Automation in Construction,2016,68:21-31.
[7]MELCHELS F P W,DOMINGOS M A N,KLEIN T J,et al.Additive Manufacturing of Tissues and Organs[J].Progress in Polymer Science,2012,37(8):1079-1104.
[8]SCHUTTER G D,LESAGE K,MECHTCHERINE V,et al.Vision of 3D Printing with Concrete — Technical,Economic and Environmental Potentials[J].Cement and Concrete Research,2018,112:25-36.
[9]Anon.A Third Industrial Revolution[J].The Economist,2012,403(8781):1-5.
[10]SANJAYAN J G,NAZARI A,NEMATOLLAHI B.3D Concrete Printing Technology[M].Amsterdam:Elsevier,2019.
[11]MELIA J L,MEARNS K,SILVA S A,et al.Safety Climate Responses and the Perceived Risk of Accidents in the Construction Industry[J].Safety Science,2008,46(6):949-958.
[12]WENG Y W,LI M Y,TAN M J,et al.Design 3D Printing Cementitious Materials via Fuller Thompson Theory and Marson-Percy Model[J].Construction and Building Materials,2018,163:600-610.
[13]YAHIA A.Shear-thickening Behavior of High-performance Cement Grouts — Influencing Mix-design Parameters[J].Cement and Concrete Research,2011,41(3):230-235.
[14]BENTZ D P,FERRARIS C F,GALLER M A,et al.Influence of Particle Size Distributions on Yield Stress and Viscosity of Cement-fly Ash Pastes[J].Cement and Concrete Research,2012,42(2):404-409.
[15]LE T T,AUSTIN S A,LIM S,et al.Mix Design and Fresh Properties for High-performance Printing Concrete[J].Materials and Structures,2012,45(8):1221-1232.
[16]LEDIGA R,KRUGER D.Optimizing Concrete Mix Design for Application in 3D Printing Technology for the Construction Industry[J].Solid State Phenomena,2017,263:24-29.
[17]RAHUL A V,SANTHANAM M,MEENA H,et al.3D Printable Concrete:Mixture Design and Test Methods[J].Cement and Concrete Composites,2019,97:13-23.
[18]MALAEB Z,HACHEM H,TOURBAH A,et al.3D Concrete Printing Machine and Mix Design[J].International Journal of Civil Engineering,2015,6(6):14-22.
[19]LIU Z X,LI M Y,WENG Y W,et al.Mixture Design Approach to Optimize the Rheological Properties of the Material Used in 3D Cementitious Material Printing[J].Construction and Building Materials,2018,198:245-255.
[20]KHELIFI H,PERROT A,LECOMPTE T,et al.Design of Clay/Cement Mixtures for Extruded Building Products[J].Materials and Structures,2013,46(6):999-1010.
[21]PERROT A,RANGEARD D,PIERRE A.Structural Built-up of Cement-based Materials Used for 3D-printing Extrusion Techniques[J].Materials and Structures,2015,49(4):1-8.
[22]PANDA B,UNLUER C,TAN M J.Extrusion and Rheology Characterization of Geopolymer Nanocomposites Used in 3D Printing[J].Composites Part B:Engineering,2019,176:107290.
[23]NERELLA V N,NATHER M,IQBAL A,et al.Inline Quantification of Extrudability of Cementitious Materials for Digital Construction[J].Cement and Concrete Composites,2019,95:260-270.
[24]MA G W,LI Z J,WANG L.Printable Properties of Cementitious Material Containing Copper Tailings for Extrusion Based 3D Printing[J].Construction and Building Materials,2018,162:613-627.
[25]ZHANG Y,ZHANG Y S,SHE W,et al.Rheological and Harden Properties of the High-thixotropy 3D Printing Concrete[J].Construction and Building Materials,2019,201:278-285.
[26]MOSTAFA A M,YAHIA A.New Approach to Assess Build-up of Cement-based Suspensions[J].Cement and Concrete Research,2016,85:174-182.
[27]REITER L,WANGLER T,ROUSSEL N,et al.The Role of Early Age Structural Build-up in Digital Fabrication with Concrete[J].Cement and Concrete Research,2018,112:86-95.
[28]ZHANG C,HOU Z Y,CHEN C,et al.Design of 3D Printable Concrete Based on the Relationship Between Flowability of Cement Paste and Optimum Aggregate Content[J].Cement and Concrete Composites,2019,104:103406.
[29]NGUYEN V H,REMOND S,GALLIAS J L.Influence of Cement Grouts Composition on the Rheological Behaviour[J].Cement and Concrete Research,2011,41(3):292-300.
[30]ROUSSEL N.Rheological Requirements for Printable Concretes[J].Cement and Concrete Research,2018,112:76-85.
[31]KRUGER J,ZERANKA S,ZIJL G V.An ab Initio Approach for Thixotropy Characterisation of(Nanoparticle-infused)3D Printable Concrete[J].Construction and Building Materials,2019,224:372-386.
[32]ROUSSEL N,OVARLEZ G,GARRAULT S,et al.The Origins of Thixotropy of Fresh Cement Pastes[J].Cement and Concrete Research,2012,42(1):148-157.
[33]ZHANG D W,WANG D M,LIN X Q,et al.The Study of the Structure Rebuilding and Yield Stress of 3D Printing Geopolymer Pastes[J].Construction and Building Materials,2018,184:575-580.
[34]ALCHAAR A S,AL-TAMIMI A K.Mechanical Properties of 3D Printed Concrete in Hot Temperatures[J].Construction and Building Materials,2021,266:120991.
[35]AL-QUTAIFI S,NAZARI A,BAGHERI A.Mechanical Properties of Layered Geopolymer Structures Applicable in Concrete 3D-printing[J].Construction and Building Materials,2018,176:690-699.
[36]FENG P,MENG X,CHEN J F,et al.Mechanical Properties of Structures 3D Printed with Cementitious Powders[J].Construction and Building Materials,2015,93:486-497.
[37]LE T T,AUSTIN S A,LIM S,et al.Hardened Properties of High-performance Printing Concrete[J].Cement and Concrete Research,2012,42(3):558-566.
[38]WOLFS R J M,BOS F P,SALET T A M.Early Age Mechanical Behaviour of 3D Printed Concrete:Numerical Modelling and Experimental Testing[J].Cement and Concrete Research,2018,106:103-116.
[39]PANDA B,LIM J H,TAN M J.Mechanical Properties and Deformation Behaviour of Early Age Concrete in the Context of Digital Construction[J].Composites Part B:Engineering,2019,165(15):563-571.
[40]XIAO J Z,ZOU S,YU Y,et al.3D Recycled Mortar Printing:System Development,Process Design,Material Properties and On-site Printing[J].Journal of Building Engineering,2020,32:101779.
[41]DING T,XIAO J Z,ZOU S,et al.Hardened Properties of Layered 3D Printed Concrete with Recycled Sand[J].Cement and Concrete Composites,2020,113:103724.
[42]XIAO J Z,LIU H R,DING T.Finite Element Analysis on the Anisotropic Behavior of 3D Printed Concrete Under Compression and Flexure[J].Additive Manufacturing,2021,39:101712.
[43]孙晓燕,乐凯笛,王海龙,等.挤出形状/尺寸对3D打印混凝土力学性能的影响[J].建筑材料学报,2020,23(6):1313-1320.
SUN Xiao-yan,LE Kai-di,WANG Hai-long,et al.Influence of Extruded Strip Shape and Dimension on the Mechanical Properties of 3D Printed Concrete[J].Journal of Building Materials,2020,23(6):1313-1320.
[44]RAHUL A V,M.SANTHANAM,MEENA H,et al.Mechanical Characterization of 3D Printable Concrete[J].Construction and Building Materials,2019,227:116710.
[45]HOU S D,DUAN Z H,XIAO J Z,et al.A Review of 3D Printed Concrete:Performance Requirements,Testing Measurements and Mix Design[J].Construction and Building Materials,2020,273:121745.
[46]侯泽宇,张 宇,张 超,等.3D打印混凝土力学性能试验方法[J].混凝土与水泥制品,2019(11):1-5.
HOU Ze-yu,ZHANG Yu,ZHANG Chao,et al.Test Method for Mechanical Properties of 3D Printed Concrete[J].China Concrete and Cement Products,2019(11):1-5.
[47]MA G W,WANG L.A Critical Review of Preparation Design and Workability Measurement of Concrete Material for Largescale 3D Printing[J].Frontiers of Structural and Civil Engineering,2018,12(3):382-400.
[48]LU B,WENG Y,LI M,et al.A Systematical Review of 3D Printable Cementitious Materials[J].Construction and Building Materials,2019,207:477-490.
[49]KHOSHNEVIS B.Automated Construction by Contour Crafting ― Related Robotics and Information Technologies[J].Automation in Construction,2004,13(1):5-19.
[50]ZHANG J C,WANG J,DONG S,et al.A Review of the Current Progress and Application of 3D Printed Concrete[J].Composites Part A:Applied Science and Manufacturing,2019,125:105533.
[51]SOUZA M T,FERREIRA I M,DE MORAES E G,et al.3D Printed Concrete for Large-scale Buildings:An Overview of Rheology,Printing Parameters,Chemical Admixtures,Reinforcements,and Economic and Environmental Prospects[J].Journal of Building Engineering,2020,32:101833.
[52]KHALIL N,AOUAD G,CHEIKH K E,et al.Use of Calcium Sulfoaluminate Cements for Setting Control of 3D-printing Mortars[J].Construction and Building Materials,2017,157:382-391.
[53]PERROT A,RANGEARD D,PIERRE A.Structural Built-up of Cement-based Materials Used for 3D-printing Extrusion Techniques[J].Materials and Structures,2015,49(4):1-8.
[54]PANDA B,TAN M J.Rheological Behavior of High Volume Fly Ash Mixtures Containing Micro Silica for Digital Construction Application[J].Materials Letters,2018,237:348-351.
[55]CHEN M,LI L,ZHENG Y,et al.Rheological and Mechanical Properties of Admixtures Modified 3D Printing Sulphoaluminate Cementitious Materials[J].Construction and Building Materials,2018,189:601-611.
[56]PERROT A,MELINGE Y,RANGEARD D,et al.Extrusion Criterion for Firm Cement-based Materials[J].Applied Rheology,2009,19(5):53042-53048.
[57]霍 亮,蔺喜强,李小龙,等.基于沙漠砂的3D打印砂浆性能研究及应用[J].混凝土,2020(12):108-110,117.
HUO Liang,LIN Xi-qiang,LI Xiao-long,et al.Research and Application of Performance Based on Desert Sand 3D Printed Mortar [J].Concrete,2020(12):108-110,117.
[58]王海龙,汪 群,孙晓燕,等.基于工作性能的3D打印PVA纤维混凝土配合比优化设计[J].混凝土,2020(11):93-95.
WANG Hai-long,WANG Qun,SUN Xiao-yan,et al.Optimization Design of 3D Printing PVA Fiber Concrete Mix Ratio Based on Work Performance [J].Concrete,2020(11):93-95.
[59]MALAEB Z,HACHEM H,TOURBAH A,et al.3D Concrete Printing:Machine and Mix Design[J].International Journal of Civil Engineering and Technology,2015,6(6):14-22.
[60]FIGUEIREDO S C,COPUROGLU O,SCHLANGEN E.Effect of Viscosity Modifier Admixture on Portland Cement Paste Hydration and Microstructure[J].Construction and Building Materials,2019,212:818-840.
[61]MA S,QIAN Y,KAWASHIMA S.Experimental and Modeling Study on the Non-linear Structural Build-up of Fresh Cement Pastes Incorporating Viscosity Modifying Admixtures[J].Cement and Concrete Research,2018,108:1-9.
[62]LONG W J,TAO J L,LIN C,et al.Rheology and Buildability of Sustainable Cement-based Composites Containing Micro-crystalline Cellulose for 3D-printing[J].Journal of Cleaner Production,2019,239:118054.
[63]MA G W,LI Z J,WANG L,et al.Mechanical Anisotropy of Aligned Fiber Reinforced Composite for Extrusion-based 3D Printing[J].Construction and Building Materials,2019,202:770-783.
[64]ZHANG Y,ZHANG Y,LIU G,et al.Fresh Properties of a Novel 3D Printing Concrete Ink[J].Construction and Building Materials,2018,174:263-271.
[65]PANDA B,PAUL S C,MING J T.Anisotropic Mechanical Performance of 3D Printed Fiber Reinforced Sustainable Construction Material[J].Materials Letters,2017,209:146-149.
[66]HAMBACH M,VOLKMER D.Properties of 3D-printed Fiber-reinforced Portland Cement Paste[J].Cement and Concrete Composites,2017,79:62-70.
[67]KAZEMIAN A,XIAO Y,COCHRAN E,et al.Cementitious Materials for Construction-scale 3D Printing:Laboratory Testing of Fresh Printing Mixture[J].Construction and Building Materials,2017,145:639-647.
[68]SOLTAN D G,LI V C.A Self-reinforced Cementitious Composite for Building-scale 3D Printing[J].Cement and Concrete Composites,2018,90:1-13.
[69]FIGUEIREDO S C,RODRIGUEZ C R,AHMED Z Y,et al.An Approach to Develop Printable Strain Hardening Cementitious Composites[J].Materials and Design,2019,169:107651.
[70]王 里,王伯林,白 刚,等.3D打印混凝土各向异性力学性能研究[J].实验力学,2020,35(2):243-250.
WANG Li,WANG Bo-lin,BAI Gang,et al.Experimental Study on the Mechanical Anisotropy of 3D Printed Concrete[J].Journal of Experimental Mechanics,2020,35(2):243-250.
[71]CHRIST S,SCHNABEL M,VORNDRAN E,et al.Fiber Reinforcement During 3D Printing[J].Materials Letters,2015,139:165-168.
[72]肖建庄.再生混凝土[M].北京:中国建筑工业出版社, 2008.
XIAO Jian-zhuang.Recycled Concrete[M].Beijing:China Architecture & Building Press,2008.
[73]孙 坚,耿春雷,张作泰,等.工业固体废弃物资源综合利用技术现状[J].材料导报,2012,26(6):105-109.
SUN Jian,GENG Chun-lei,ZHANG Zuo-tai,et al.Present Situation of Comprehensive Utilization Technology of Industrial Solid Waste[J].Materials Reports,2012,26(6):105-109.
[74]肖建庄,陈立浩,叶建军,等.混凝土结构拆除技术与绿色化发展[J].建筑科学与工程学报,2019,36(5):1-10.
XIAO Jian-zhuang,CHEN Li-hao,YE Jian-jun,et al.Technology and Green Development of Demolition for Concrete Structures[J].Journal of Architecture and Civil Engineering,2019,36(5):1-10.
[75]肖建庄,李佳彬,兰 阳.再生混凝土技术研究最新进展与评述[J].混凝土,2003(10):17-20,57.
XIAO Jian-zhuang,LI Jia-bin,LAN Yang.Research on Recycled Aggregate Concrete — A Review[J].Concrete,2003(10):17-20,57.
[76]HAN Y L,YANG Z H,DING T,et al.Environmental and Economic Assessment on 3D Printed Buildings with Recycled Concrete[J].Journal of Cleaner Production,2020,278:123884.
[77]赵世颖,李 滢,康晓明,等.再生微粉混凝土抗冻性能试验研究[J].工业建筑,2020,50(11):112-118,96.
ZHAO Shi-ying,LI Ying,KANG Xiao-ming,et al.Experimental Study on Frost Resistance of Recycled Fine Powder Concrete[J].Industrial Construction,2020,50(11):112-118,96.
[78]TAN K H,DU H.Use of Waste Glass as Sand in Mortar:Part I — Fresh,Mechanical and Durability Properties[J].Cement and Concrete Composites,2013,35(1):109-117.
[79]杨震樱,周长顺.玻璃粉对再生混凝土力学性能的影响[J].硅酸盐通报,2020,39(12):3874-3880.
YANG Zhen-ying,ZHOU Chang-shun.Effect of Glass Powder on Mechanical Properties of Recycled Concrete[J].Bulletin of the Chinese Ceramic Society,2020,39(12):3874-3880.
[80]DUAN Z H,HOU S D,XIAO J Z,et al.Rheological Properties of Mortar Containing Recycled Powders from Construction and Demolition Wastes[J].Construction and Building Materials,2020,237:117622.
[81]XIAO J Z,ZOU S,YU Y,et al.3D Recycled Mortar Printed:System Development,Process Design,Material Properties and On-site Printing[J].Journal of Building Engineering,2020,32:101779.
[82]马国伟,柴艳龙,王 里,等.3D打印陶砂轻质混凝土的制备与力学性能测试[J].实验力学,2020,35(1):58-66.
MA Guo-wei,CHAI Yan-long,WANG Li,et al.Preparation and Mechanical Properties Testing of 3D Printed Ceramic Sand Lightweight Concrete[J].Journal of Experimental Mechanics,2020,35(1):58-66.
[83]肖 斐,崔洪涛,陈剑雄,等.超磨细石灰石粉高强混凝土的研究[J].硅酸盐通报,2010,29(6):1303-1307.
XIAO Fei,CUI Hong-tao,CHEN Jian-xiong,et al.Study on High Strength Concrete Containing Ultra-fine Limestone Powder[J].Bulletin of the Chinese Ceramic Society,2010,29(6):1303-1307.
[84]LIN J C,WU X,YANG W,et al.The Influence of Fine Aggregates on the 3D Printed Performance[C]//XIN S X.IOP Conference Series:Materials Science and Engineering.Bristol:IOP Publishing,2018:012079.
[85]EI CHEIKH K,REMOND S,KHALIL N,et al.Numerical and Experimental Studies of Aggregate Blocking in Mortar Extrusion[J].Construction and Building Materials,2017,145:452-463.
[86]MECHTCHERINE V,NERELLA V N,WILL F,et al.Large-scale Digital Concrete Construction — CONPrint3D Concept for On-site,Monolithic 3D-printing[J].Automation in Construction,2019,107:102933.
[87]杨凤玲,嵇银行,李玉寿,等.玻璃骨料粒径对玻璃混凝土性能影响的研究[J].混凝土,2012(8):78-80.
YANG Feng-ling,JI Yin-hang,LI Yu-shou,et al.Study on the Influence of Particle Size of the Glass Aggregate on the Performance of Glass Concrete[J].Concrete,2012(8):78-80.
[88]穆龙飞,冯竟竟,杨进波,等.页岩陶粒粒径对混凝土强度及热工性能影响研究[J].混凝土,2020(11):52-56.
MU Long-fei,FENG Jing-jing,YANG Jin-bo,et al.Experimental Study on the Influence of Shale Ceramsite Size on Strength and Thermal Properties of Concrete[J].Concrete,2020(11):52-56.
[89]杨悦增,邓红卫,彭剑平,等.骨料粒径对砂浆试件微观孔隙结构和单轴强度影响分析[J].采矿技术,2020,20(6):27-33.
YANG Yue-zeng,DENG Hong-wei,PENG Jian-ping,et al.Influence of Aggregate Size on Micro Pore Structure and Uniaxial Strength of Mortar Specimens[J].Mining Technology,2020,20(6):27-33.
[90]CESARETTI G,DINI E,KESTELIER X D,et al.Building Components for an Outpost on the Lunar Soil by Means of a Novel 3D Printing Technology[J].Acta Astronautica,2014,93:430-450.
[91]GAO W,ZHANG Y B,RAMANUJAN D,et al.The Status,Challenges,and Future of Additive Manufacturing in Engineering[J].Computer-aided Design,2015,69:65-89.
[92]GIBSON I,ROSEN D W,STUCKER B.Additive Manufacturing Technologies[M].New York:Sprin-ger,2015.
[93]王香港,王 申,贾鲁涛,等.3D打印混凝土技术在新冠肺炎防疫方舱中的应用[J].混凝土与水泥制品,2020(4):1-4,13.
WANG Xiang-gang,WANG Shen,JIA Lu-tao,et al.Application of 3D Printing Technology in Epidemic Prevention Cabins During the Outbreak of COVID-19[J].China Concrete and Cement Products,2020(4):1-4,13.
[94]CESARETTI G,DINI E,KESTELIER X D,et al.Building Components for an Outpost on the Lunar Soil by Means of a Novel 3D Printing Technology[J].Acta Astronautica,2014,93:430-450.
[95]JI G C,DING T,XIAO J Z,et al.A 3D Printed Ready-mixed Concrete Power Distribution Substation:Materials and Construction Technology[J].Materials,2019,12(9):1540.
[96]王栋民.固废与生态材料的未来发展(代序)[J].硅酸盐通报,2020,39(8):2357-2358.
WANG Dong-min.Future Development of Solid Waste and Ecological Materials[J].Bulletin of the Chinese Ceramic Society,2020,39(8):2357-2358.
[97]HARMAN J.The Shark's Paintbrush:Biomimicry and How Nature is Inspiring Innovation[M].Ashland:White Cloud Press,2013.
[98]PLESSIS A D,BABAFEMI A J,PAUL S C,et al.Biomimicry for 3D Concrete Printing:A Review and Perspective[J].Additive Manufacturing,2020,38:101823.
[99]YANG Y,SONG X,LI X J,et al.Recent Progress in Biomimetic Additive Manufacturing Technology:From Materials to Functional Structures[J].Advanced Materials,2018,30(36):1706539.
[100]文 俊,蒋友宝,胡佳鑫,等.3D打印建筑用材料研究、典型应用及趋势展望[J].混凝土与水泥制品,2020(6):26-29.
WEN Jun,JIANG You-bao,HU Jia-xin,et al.Research on Materials,Typical Applications and Development Trends of 3D Printing Buildings[J].China Concrete and Cement Products,2020(6):26-29.
[101]GB 50003—2011,砌体结构设计规范[S].
GB 50003—2011,Code for Design of Masonry Structures[S].
[102]GB 50010—2010,混凝土结构设计规范[S].
GB 50010—2010,Code for Design of Concrete Structures[S].
[103]GB 50204—2015,混凝土结构工程施工质量验收规范[S].
GB 50204—2015,Code for Acceptance of Constructional Quality of Concrete Structures[S].

相似文献/References:

备注/Memo

备注/Memo:

收稿日期:2021-02-21
基金项目:国家自然科学基金项目(51325802,52078358)
作者简介:肖建庄(1968-),男,山东沂南人,教授,博士研究生导师,工学博士,E-mail:jzx@tongji.edu.cn。

常用功能

更新日期/Last Update: 2021-09-01