«上一篇/Previous Article|本期目录/Table of Contents|下一篇/Next Article»

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:

42卷

期数:

2025年01期

页码:

41-50

栏目:

建筑结构

出版日期:

2025-01-20

文章信息/Info

Title:

Parameter analysis of seismic behavior and bearing capacity calculation of reinforced concrete columns with stay-in-place UHPC formwork

文章编号:

1673-2049(2025)01-0041-10

作者:

王 朋^1,2,尤学辉¹,史庆轩^1,2,陶 毅^1,2,戎 翀^1,2,黄 杰¹

(1. 西安建筑科技大学 土木工程学院,陕西 西安 710055; 2. 西安建筑科技大学 结构工程与抗震教育部重点实验室,陕西 西安 710055)

Author(s):

WANG Peng^1,2, YOU Xuehui¹, SHI Qingxuan^1,2, TAO Yi^1,2, RONG Chong^1,2, HUANG Jie¹

(1. College of Civil Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, Shaanxi, China; 2. Key Lab of Structural Engineering and Earthquake Resistance, Ministry of Education, Xi'an University of Architecture and Technology, Xi'an 710055, Shaanxi, China)

关键词:

UHPC免拆模板;  钢筋混凝土柱;  抗震性能;  数值模拟;  承载力计算

Keywords:

UHPC formwork;  reinforced concrete column;  seismic behavior;  numerical simulation;  bearing capacity calculation

分类号:

TU375

DOI:

10.19815/j.jace.2023.04075

文献标志码:

A

摘要:

为研究UHPC免拆模板钢筋混凝土柱在不同参数影响下的抗震性能,基于ABAQUS软件中混凝土塑性损伤(CDP)模型,考虑模板与后浇混凝土的界面接触滑移建立了数值分析模型; 讨论了轴压比、普通混凝土强度、配筋率和模板厚度等参数对UHPC免拆模板-RC柱承载力和延性的影响; 基于平截面假定,给出了UHPC免拆模板-RC柱的承载力计算公式。结果表明:建立的有限元模型能较好地模拟试件的承载力、骨架曲线和混凝土损伤情况; 随着轴压比的增大,试件的承载力和延性均先增大后减小,轴压比为0.7时承载力和延性均最高; 随着混凝土强度的提高,试件的承载力逐渐增大,但增长幅度却逐渐降低; 提高配筋率可以提高试件的承载力,但对延性影响不大; 模板的厚度对试件的承载力和延性影响显著,当模板厚度从10 mm增加到25 mm时,试件的承载力提高了24.1%,但其延性降低了43.8%,在保证试件拥有足够的承载力和变形能力下,建议UHPC模板厚度选择15～20 mm; 基于平截面假定得到的承载力计算方法可以很好地预测试件的承载能力,计算值与模拟值(试验值)的比值均值为0.97,标准差为0.04。

Abstract:

To investigate the seismic behavior of reinforced concrete columns with stay-in-place UHPC formwork under the influence of various parameters, based on the concrete damage plastic(CDP)model in ABAQUS software, a numerical analysis model was established considering the bonding interface slip between formwork and concrete. The effect of axial compression ratio, ordinary concrete strength, reinforcement ratio and formwork thickness on the bearing capacity and ductility of reinforced concrete columns with stay-in-place UHPC formwork were discussed. Based on the plane section assumption, a formula for predicting the bearing capacity of UHPC formwork-RC column was provided. The results show that the established finite element model can well simulate the bearing capacity, skeleton curve and concrete damage of the specimen. With the increase of axial compression ratio, the bearing capacity and ductility of specimen first increase and then decrease, and the bearing capacity and ductility reach the maximum when the axial compression ratio is 0.7. With the increase of concrete strength, the bearing capacity gradually increases, but the growth rate gradually decreases. Increasing the reinforcement ratio can enhance the bearing capacity of specimen, but it has little effect on ductility. The thickness of the formwork has a significant influence on the bearing capacity and ductility. When the formwork thickness is increased from 10 mm to 25 mm, the bearing capacity is increased by 24.1%, but its ductility is decreased by 43.8%. Under the condition that the specimen has sufficient bearing capacity and deformation capacity, it is suggested that the formwork thickness can be 15-20 mm. The bearing capacity calculation method based on the plane section assumption can well predict the bearing capacity of the specimen. The average ratio of the calculated value to the simulated value(test value)is 0.97, and the standard deviation is 0.04.

参考文献/References:

[1] REN G M, WU H, FANG Q, et al. Effects of steel fiber content and type on static mechanical properties of UHPCC[J]. Construction and Building Materials, 2018, 163: 826-839.
[2]LIU J Z, HAN F Y, CUI G,et al. Combined effect of coarse aggregate and fiber on tensile behavior of ultra-high performance concrete[J]. Construction and Building Materials, 2016, 121: 310-318.
[3]HOANG A L, FEHLING E. Influence of steel fiber content and aspect ratio on the uniaxial tensile and compressive behavior of ultra high performance concrete[J]. Construction and Building Materials, 2017, 153: 790-806.
[4]张 阳,黄松龄,刘颖峰,等.预应力UHPC加固RC梁抗弯性能试验研究[J].湖南大学学报(自然科学版),2022,49(3):23-31.
ZHANG Yang, HUANG Songling, LIU Yingfeng, et al. Experimental study on flexural behavior of RC beams strengthened with prestressed ultra-high performance concrete[J]. Journal of Hunan University(Natural Sciences), 2022, 49(3): 23-31.
[5]成 煜,谢 剑,于敬海.二次受力下UHPC加固钢筋混凝土柱轴压性能试验研究[J].硅酸盐通报,2019,38(7):2295-2301.
CHENG Yu, XIE Jian, YU Jinghai. Experimental study on axial compressive behavior of RC columns strengthened by UHPC under secondary load[J]. Bulletin of the Chinese Ceramic Society, 2019, 38(7): 2295-2301.
[6]LU T T, GUAN K, JIN H W. Experimental study on bending performance of high-performance fiber-reinforced cement composite prefabricated monolithic composite beams[J]. Buildings, 2023, 13(7): 1744.
[7]ZHANG P, SHANG J Q, LIU Y, et al. Flexural behavior of GFRP bar-reinforced concrete beams with U-shaped UHPC stay-in-place formworks[J]. Journal of Building Engineering, 2022, 45: 103403.
[8]LIU B, CHENG X M, WANG L G, et al.Compressive performance of PVA fiber-reinforced 3D concrete printing permanent formwork composite columns reinforced with BFRP bars[J]. Journal of Building Engineering, 2024, 98: 111174.
[9]ABBAS Z H, GORGIS I N, HASSAN M S. Cross-sectional shape effect of stay-in-place formwork column on axial compressive behaviour[J]. Journal of Building Engineering, 2024, 90: 109417.
[10]SONG S F, DENG M K, ZHANG S H, et al. Flexural properties of reinforced concrete slabs using highly ductile concrete(HDC)permanent formwork system[J]. Journal of Building Engineering, 2023, 80: 108111.
[11]ZHANG P, XU F, LIU Y, et al. Shear behaviour of composite beams with permanent UHPC formwork and high-strength steel rebar[J]. Construction and Building Materials, 2022, 352: 128951.
[12]张一鹏.预制UHPC模版-NC叠合梁抗弯性能试验研究[D].沈阳:沈阳大学,2022.
ZHANG Yipeng. Experimental study on flexural behavior of precast UHPC formwork-NC composite beam[D]. Shenyang: Shenyang University, 2022.
[13]刘亚钊.预制槽型UHPC模板厚度影响下叠合梁抗弯性能试验研究[D].沈阳:沈阳大学,2022.
LIU Yazhao.Experimental study on flexural behavior of composite beams under the influence of prefabricated groove UHPC formwork thickness[D].Shen-yang:Shenyang University,2022.
[14]夏 洋.预制UHPC永久模板-GFRP筋混凝土组合梁抗弯性能研究[D].郑州:郑州大学,2020.
XIA Yang. Study on flexural behavior of precast UHPC permanent formwork-GFRP reinforced concrete composite beams[D]. Zhengzhou: Zhengzhou University, 2020.
[15]WANG X Y, LIU H B, JU Y Z, et al. Experimental and analytical models of flexural behavior of U-shaped reactive powder concrete permanent beam formworks[J]. Construction and Building Materials, 2021, 300: 123670.
[16]梁兴文,汪 萍,徐明雪,等.免拆超高性能混凝土模板钢筋混凝土梁的受力性能及短期刚度研究[J].建筑结构学报,2020,41(7):154-163.
LIANG Xingwen, WANG Ping, XU Mingxue, et al. Mechanical behavior and immediate stiffness of RC beams with UHPC permanent formwork[J]. Journal of Building Structures, 2020, 41(7): 154-163.
[17]梁兴文,汪 萍,徐明雪,等.免拆UHPC模板RC梁受弯性能试验及承载力分析[J].工程力学,2019,36(9):95-107.
LIANG Xingwen, WANG Ping, XU Mingxue, et al. Flexural behavior and capacity analysis of RC beams with permanent UHPC formwork[J]. Engineering Mechanics, 2019, 36(9): 95-107.
[18]张 锐,胡 棚,李 晰,等.U形UHPC永久模板RC无腹筋组合梁抗剪性能试验[J].中国公路学报,2021,34(8):145-156.
ZHANG Rui, HU Peng, LI Xi, et al. Shear behavior of reinforced concrete composite beams without stirrups using U-shaped UHPC permanent formwork[J]. China Journal of Highway and Transport, 2021, 34(8): 145-156.
[19]单 波,王志鸿,肖 岩,等.RPC管-海水海砂混凝土组合柱抗压性能[J].湖南大学学报(自然科学版),2020,47(9):104-112.
SHAN Bo, WANG Zhihong, XIAO Yan,et al. Compression performance of seawater and sea sand concrete filled RPC tube composite columns under axial load[J]. Journal of Hunan University(Natural Sciences), 2020, 47(9): 104-112.
[20]王 钧,王志彬,李 论.配有钢纤维RPC免拆柱模的钢筋混凝土短柱轴压力学性能[J].建筑科学与工程学报,2016,33(2):98-106.
WANG Jun, WANG Zhibin, LI Lun. Mechanical behavior of reinforced concrete short columns with steel fiber RPC column-permanent template subjected to axial compression[J]. Journal of Architecture and Civil Engineering, 2016, 33(2): 98-106.
[21]杨医博,杨凯越,吴志浩,等.配筋超高性能混凝土用作免拆模板对短柱力学性能影响的实验研究[J].材料导报,2017,31(23):120-124,137.
YANG Yibo, YANG Kaiyue, WU Zhihao, et al. An experimental study on the influence of reinforced ultra-high performance concrete permanent template to short column's mechanical property[J]. Materials Review, 2017, 31(23): 120-124, 137.
[22]梁兴文,史纪从,于 婧,等.免拆超高性能混凝土模板钢筋混凝土柱抗震性能研究[J].地震工程学报,2020,42(3):579-588,606.
LIANG Xingwen, SHI Jicong, YU Jing, et al. Seismic behavior of reinforced concrete columns with permanent template of ultra-high-performance concrete[J]. China Earthquake Engineering Journal, 2020, 42(3): 579-588, 606.
[23]LIN Y, CHEN Z X, GUAN D Z, et al. Experimental study on interior precast concrete beam-column connections with UHPC core shells[J]. Structures, 2021, 32: 1103-1114.
[24]王 朋,尤学辉,黄 杰,等.拼接成型UHPC免拆模板钢筋混凝土柱的抗震性能[J].哈尔滨工业大学学报,2024,56(1):103-116.
WANG Peng, YOU Xuehui, HUANG Jie, et al. Seismic behavior of reinforced concrete column with an assembly stay-in-place UHPC formwork[J]. Journal of Harbin Institute of Technology, 2024, 56(1): 103-116.
[25]混凝土结构设计规范:GB 50010—2010[S].北京:中国建筑工业出版社,2015.
Code for design of concrete structures: GB 50010—2010[S]. Beijing: China Architecture & Building Press, 2015.
[26]郭晓宇,亢景付,朱劲松.超高性能混凝土单轴受压本构关系[J].东南大学学报(自然科学版),2017,47(2):369-376.
GUO Xiaoyu, KANG Jingfu, ZHU Jinsong. Constitutive relationship of ultrahigh performance concrete under uni-axial compression[J]. Journal of Southeast University(Natural Science Edition), 2017, 47(2): 369-376.
[27]闫光杰.200 MPa级活性粉末混凝土(RPC200)的破坏准则与本构关系研究[D].北京:北京交通大学,2005.
YAN Guangjie. Study on failure criterion and constitutive relation of 200 MPa reactive powder concrete(RPC200)[D]. Beijing: Beijing Jiaotong University, 2005.
[28]胡翱翔, 梁兴文, 于 婧, 等. 超高性能混凝土轴心受拉力学性能试验研究[J].湖南大学学报(自然科学版),2018,45(9):30-37.
HU Aoxiang, LIANG Xingwen, YU Jing, et al. Experimental study of uniaxial tensile characteristics of ultra-high performance concrete[J]. Journal of Hunan University(Natural Sciences), 2018, 45(9): 30-37.
[29]刘桐旭.节段预制拼装UHPC梁接缝抗剪性能试验与理论研究[D].南京:东南大学,2017.
LIU Tongxu. Experimental and theoretical study on shear behavior of joints of segmented prefabricated UHPC beams[D]. Nanjing: Southeast University, 2017.
[30]HUSSEIN H H, WALSH K K, SARGAND S M, et al. Modeling the shear connection in adjacent box-beam bridges with ultrahigh-performance concrete joints.I:model calibration and validation[J]. Journal of Bridge Engineering, 2017, 22(8): 04017043.
[31]徐明雪,梁兴文,汪 萍,等.超高性能混凝土梁正截面受弯承载力理论研究[J].工程力学,2019,36(8):70-78.
XU Mingxue, LIANG Xingwen, WANG Ping, et al. Theoretical investigation on normal section flexural capacity of UHPC beams[J]. Engineering Mechanics, 2019, 36(8): 70-78.
[32]彭 飞,方 志.钢筋UHPC梁正截面抗弯承载力计算方法[J].土木工程学报,2021,54(3):86-97.
PENG Fei, FANG Zhi. Calculation approach for flexural capacity of reinforced UHPC beams[J]. China Civil Engineering Journal, 2021, 54(3): 86-97.

相似文献/References:

[1]李俊华,于长海,唐跃锋,等.CFRP布加固火灾后钢筋混凝土柱的试验研究[J].建筑科学与工程学报,2011,28(04):48.
　LI Jun-hua,YU Chang-hai,TANG Yue-feng,et al.Experimental Research on Rehabilitation with CFRP Sheets for ReinforcedConcrete Columns After Exposure to Fire[J].Journal of Architecture and Civil Engineering,2011,28(01):48.

备注/Memo

备注/Memo:

收稿日期:2023-04-02
基金项目:国家自然科学基金项目(52178159,52178505,52108171); 陕西省教育厅协同创新中心项目(23JY040)
作者简介:王 朋(1987-),男,工学博士,副教授,博士生导师,E-mail:wangpeng@xauat.edu.cn。
Author resume: WANG Peng(1987-), male, PhD, associate professor, E-mail: wangpeng@xauat.edu.cn.

常用功能

更新日期/Last Update: 2025-01-20