|本期目录/Table of Contents|

[1]郑宏,杨飞颖,张维刚.钢板深梁屈曲分析[J].建筑科学与工程学报,2007,24(03):31-35.
 ZHENG Hong,YANG Fei-ying,ZHANG Wei-gang.Buckling Analysis on Steel Plate Deep Beam[J].Journal of Architecture and Civil Engineering,2007,24(03):31-35.
点击复制

钢板深梁屈曲分析(PDF)
分享到:

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:
24卷
期数:
2007年03期
页码:
31-35
栏目:
出版日期:
2007-09-20

文章信息/Info

Title:
Buckling Analysis on Steel Plate Deep Beam
作者:
郑宏杨飞颖张维刚
长安大学 建筑工程学院,陕西 西安 710061
Author(s):
ZHENG Hong, YANG Fei-ying, ZHANG Wei-gang
School of Architectural Engineering, Chang'an University, Xi'an 710061, Shaanxi, China
关键词:
抗侧力体系 钢板深梁 弹塑性屈曲 极限承载力
Keywords:
lateral resistant system steel plate deep beam elastic-plastic buckling ultimate bearing capacity
分类号:
TU392.4
DOI:
-
文献标志码:
A
摘要:
介绍了一种新型的抗侧力结构体系——钢板深梁; 利用有限元分析软件ANSYS分析了两侧加劲钢板深梁的弹塑性屈曲性能,讨论了深梁跨高比、宽厚比等参数对钢板深梁屈曲性能的影响。研究结果表明:极限承载力与钢板深梁跨高比近似成正比关系; 对厚板与薄板而言,厚板的非线性由材料的弹塑性引起,而薄板的非线性由深梁严重面外变形和材料弹塑性共同引起; 厚板对加劲肋的要求较低,可不布置中部加劲肋,而薄板对加劲肋的要求较高。
Abstract:
Steel plate deep beam(SPDB), as a new lateral resistant system, was introduced. The finite element analysis software ANSYS was adopted to analyze the elastic-plastic buckling behavior of SPDB with stiffened panel at both edges. The research work was focused on the influences of side length ratio, height-thicknessratio and so on. The result shows that the ultimate bearing capacity of SPDB is proportional to the side length ratio. The thick panel is different from the thin panel. The nonlinear behavior of the thick panel is resulted from the nonlinearity of material, but the nonlinear behavior of the thin panel is from both the nonlinearity of material and serious geometry deformation of the panel. In the design of SPDB, the interior stiffeners are necessary for the thin panel but not necessary for the thick panel.

参考文献/References:

[1] ZHAO Qiu-hong,ABOIHASSAN A A.Cyclic Behavior of Traditional and Innovative Composite Shear Walls[J].Journal of Structural Engineering,2004,130(2):271-284.
[2]KAHN L F,HANSON R D.Infilled Walls for Earthquake Strengthening[J].Journal of Structural Engineering,1979,105(S4):283-296.
[3]KABELE P,TAKEUCHI S,INABA K,et al.Performance of Engineered Cementitious Composites in Repair and Retrofit:Analytical Estimates[C]//REINHARDT H W,NAMAAN A.High Performance Fiber Reinforced Composites.Bagneux:RILEM Publishers,1999:617-627.
[4]KESNER K E.Development of Seismic Strengthening and Retrofit Strategies for Critical Facilities Using Engineered Cementitious Composite Materials[D].New York:Cornell University,2003.
[5]张如杭,王元清,石永久,等.深肋组合扁梁肋部混凝土受力分析[J].建筑科学与工程学报,2006,23(3):59-62. ZHANG Ru-hang,WANG Yuan-qing,SHI Yong-jiu,et al.Stress Distribution Analysis of Concrete in Deep Deck Flange of Composite Slim Beam[J].Journal of Architecture and Civil Engineering,2006,23(3):59-62.
[6]黄文金,陈宝春.钢管混凝土桁梁受弯试验研究[J].建筑科学与工程学报,2006,23(1):29-33. HUANG Wen-jin,CHEN Bao-chun.Experimental Research on Concrete-filled Steel Tube Truss Girder Under Bending[J].Journal of Architecture and Civil Engineering,2006,23(1):29-33.
[7]赵均海,郭红香,魏雪英.圆中空夹层钢管混凝土柱承载力研究[J].建筑科学与工程学报,2005,22(1):50-54. ZHAO Jun-hai,GUO Hong-xiang,WEI Xue-ying.Research on Bearing Capacity of Concrete Filled Double Skin Steel Tubes Column[J].Journal of Architecture and Civil Engineering,2005,22(1):50-54.
[8]曹宝珠,周绪红,刘永健.钢管混凝土桁架新型节点试验研究[J].建筑科学与工程学报,2006,23(1):45-48. CAO Bao-zhu,ZHOU Xu-hong,LIU Yong-jian.Experimental Research on New Joints of Concrete-filled Steel Tube Truss[J].Journal of Architecture and Civil Engineering,2006,23(1):45-48.
[9]聂建国,秦 凯,张桂标.方钢管混凝土柱内隔板式节点的抗弯承载力研究[J].建筑科学与工程学报,2005,22(1):42-49. NIE Jian-guo,QIN Kai,ZHANG Gui-biao.Experimental Research and Theoretical Analysis on Flexural Capacity of Connections for Concrete-filled Steel Square Tubular Columns with Inner Diaphragms[J].Journal of Architecture and Civil Engineering,2005,22(1):42-49.
[10]裴万吉,赵均海,魏雪英.钢管混凝土的截面形式及其承载力分析[J].建筑科学与工程学报,2006,23(1):49-53. PEI Wan-ji,ZHAO Jun-hai,WEI Xue-ying.Analysis of Section Types of Concrete-filled Steel Tube and Its Load Capacity[J].Journal of Architecture and Civil Engineering,2006,23(1):49-53.
[11]KESNER K E.Investigation of Infill Panels Made from Engineered Cementitious Composites for Seismic Strengthening and Retrofit[J].Journal of Structural Engineering,2005,131(11):1 712-1 720.
[12]GB 50010-2002,混凝土结构设计规范[S]. GB 50010-2002,Code for Design of Concrete Structures[S].
[13]GB 50017-2003,钢结构设计规范[S]. GB 50017-2003,Code for Design of Steel Structures[S].

相似文献/References:

[1]周天华,吴函恒,白亮,等.钢框架-预制混凝土抗侧力墙装配式结构体系[J].建筑科学与工程学报,2013,30(03):1.
 ZHOU Tian-hua,WU Han-heng,BAI Liang,et al.Fabricated Structural System of Steel Frame-prefabricated Concrete Lateral Resistance Wall[J].Journal of Architecture and Civil Engineering,2013,30(03):1.

备注/Memo

备注/Memo:
收稿日期:2007-06-26
基金项目:国家自然科学基金项目(50678025)
作者简介:郑 宏(1964-),男,黑龙江哈尔滨人,教授,博士生导师,工学博士,博士后,E-mail:cehzheng@sohu.com。
更新日期/Last Update: 2007-09-20