|本期目录/Table of Contents|

[1]于长亮,郑宏,袁晓洒,等.带侧板钢节点力学性能研究[J].建筑科学与工程学报,2012,29(04):74-82.
 YU Chang-liang,ZHENG Hong,YUAN Xiao-sa,et al.Mechanical Behavior of Moment Resisting Connection with Side Plate Under Cyclic Loading[J].Journal of Architecture and Civil Engineering,2012,29(04):74-82.
点击复制

带侧板钢节点力学性能研究(PDF)
分享到:

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:
29卷
期数:
2012年04期
页码:
74-82
栏目:
出版日期:
2012-12-30

文章信息/Info

Title:
Mechanical Behavior of Moment Resisting Connection with Side Plate Under Cyclic Loading
作者:
于长亮,郑宏,袁晓洒,刘志杰
长安大学 建筑工程学院,陕西 西安 710061
Author(s):
YU Chang-liang, ZHENG Hong, YUAN Xiao-sa, LIU Zhi-jie
School of Civil Engineering, Chang'an University, Xi'an 710061, Shaanxi, China
关键词:
抗弯钢节点 侧板 低周反复荷载 滞回性能 力学性能 极限荷载
Keywords:
moment connection side plate low cyclic loading hysteretic behavior mechanical behavior ultimate load
分类号:
TU391
DOI:
-
文献标志码:
A
摘要:
通过带侧板抗弯钢节点低周反复加载试验,阐述了其破坏过程和破坏机理,得到了节点滞回曲线和极限承载力; 利用有限元分析软件ANSYS对试验进行了模拟,计算结果与试验吻合良好; 讨论了梁、柱的截面尺寸和侧板厚度对钢节点性能的影响。结果表明:节点具有良好的耗能能力和延性,并使塑性铰发生在梁上; 增大梁截面尺寸可以最有效地增大节点的初始刚度、屈服荷载和极限荷载; 柱截面尺寸对节点的初始刚度影响较明显,但对极限荷载和屈服荷载的影响很小; 侧板厚度对节点力学性能影响很小。
Abstract:
Low-cyclic loading tests conducted on side plate moment connection were presented, including the test phenomena and failure mechanism, the hysteretic performance and ultimate bearing capacity. Finite element analysis software ANSYS was adopted to establish models of the tests and the results were almost identical to the tests. ANSYS was also adopted to analyze effects of beam and column sizes and thickness of side plate. The results show that the connections have a good capacity of energy dissipation and cause the ductility of structure with formation of plastic hinges in the beams. The initial stiffness, yielding load and ultimate load increase obviously with the increase of the size of beam. The size of column has remarkable influence on initial stiffness. But it has negligible effect on yielding load and ultimate load. The thickness of side plate has negligible effect on the behavior of the connection.

参考文献/References:

[1] 周殿文.树状柱框架钢梁拼接处产生塑性铰的设计方法研究[D].西安:西安建筑科技大学,2008. ZHOU Dian-wen.A Study on Design Method of Plastic Hinge Appear in the Splicing Location of Beam in Column-tree Frame[D].Xi'an:Xi'an University of Architecture and Technology,2008.
[2]吴 涛,刘伯权,邢国华,等.RC框架变梁变柱中节点抗裂性能试验[J].长安大学学报:自然科学版,2009,29(4):77-81. WU Tao,LIU Bo-quan,XING Guo-hua,et al.Crack Resistance Test of Interior Joints with Abrupt Reduction in Beam and Column Section in Reinforced Concrete Frame[J].Journal of Chang'an University:Natu- 表6 不同侧板厚度模型的初始刚度和承载力指标 Tab.6 Initial Stiffness and Bearing Capacity Indexes of Models with Different Sizes of Beams and Columns 模型编号 K/(kN·mm)K的增量/% My/(kN·m)My的增量/% Mu/(kN·m)Mu的增量/% MuM-1yCBJ1-1A 1.82 -8.5 208.39 -4.3 308.82 -0.3 1.48CBJ1-1 1.99 0.0 217.81 0.0 309.76 0.0 1.42CBJ1-1B 2.08 4.5 223.69 2.7 317.83 2.6 1.42CBJ1-1C 2.18 9.5 229.32 5.3 323.93 4.5 1.41 ral Science Edition,2009,29(4):77-81.
[3]窦祖融,王 怡,薛伟辰.低周反复荷载下装配整体式混凝土框架边节点的抗震性能[J].建筑科学与工程学报,2010,27(2):61-66. DOU Zu-rong,WANG Yi,XUE Wei-chen.Seismic Performance of Precast Monolithic Concrete Frame Exterior Connections Under Low Cyclic Loading[J].Journal of Architecture and Civil Engineering,2010,27(2):61-66.
[4]袁晓洒,郑 宏,于长亮.钢框架内填钢板深梁协同分析[J].建筑科学与工程学报,2012,29(2):43-47. YUAN Xiao-sa,ZHENG Hong,YU Chang-liang.Interactive Analysis of Steel Deep Beam Infilling Steel Frame[J].Journal of Architecture and Civil Engineering,2012,29(2):43-47.
[5]郑 宏,杨飞颖,张维刚.钢板深梁屈曲分析[J].建筑科学与工程学报,2007,24(3):31-35. ZHENG Hong,YANG Fei-ying,ZHANG Wei-gang.Buckling Analysis on Steel Plate Deep Beam[J].Journal of Architecture and Civil Engineering,2007,24(3):31-35.
[6]HOUGHTON D L.Prototype Cyclic Testing of the SidePlateTM Moment Connection System[C]//CUREE.Proceedings of Northridge Earthquake Research Conference.Los Angeles:CUREE,1997:1-12.
[7]SHAO D H,HALE T.Full Scale Testing and Project Application of SidePlateTM Moment Connection for SMRF Using Deep Columns[C]//CUREE.Proceedings of Northridge Earthquake Research Conference.Los Angeles:CUREE,2003.
[8]DEYLAMI A,YAKHCHALIAN M.Behavior of Two-way Steel Moment Connections with Side Plates and Double-I Built-up Columns Under Cyclic Loading[C]//WCEE.Proceedings of the 14th World Conference on Earthquake Engineering.Beijing:WCEE,2008:1-8.
[9]DEYLAMI A,YAKHCHALIAN M.Comparison Between “Common Moment Connection” and Moment Connection with Side Plates for Double-I Built-up Columns[C]//WCEE.Proceedings of the 14th World Conference on Earthquake Engineering.Beijing:WCEE,2008:11-18.

相似文献/References:

备注/Memo

备注/Memo:
收稿日期:2012-08-27
基金项目:国家自然科学基金项目(50678025); 中央高校基本科研业务费专项资金项目(CHD2012TD012)
作者简介:于长亮(1986-),男,河北秦皇岛人,工学硕士研究生,E-mail:yuclcl@163.com。
更新日期/Last Update: 2012-12-20