«上一篇/Previous Article|本期目录/Table of Contents|下一篇/Next Article»

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:

38卷

期数:

2021年04期

页码:

101-109

栏目:

出版日期:

2021-07-15

文章信息/Info

Title:

Experimental Study on Bending Resistance of Original Bamboo Material

文章编号:

1673-2049(2021)04-0101-09

作者:

刘鹏程,周期石,田杰夫,张 海,李 威,付飞扬

(中南大学 土木工程学院,湖南 长沙 410075)

Author(s):

LIU Peng-cheng, ZHOU Qi-shi, TIAN Jie-fu, ZHANG Hai, LI Wei, FU Fei-yang

(School of Civil Engineering, Central South University, Changsha 410075, Hunan, China)

关键词:

原竹;  抗弯性能;  Bootstrap法;  可靠度理论

Keywords:

bamboo;  bending resistance;  Bootstrap method;  reliability theory

分类号:

TU311

DOI:

10.19815/j.jace.2021.03041

文献标志码:

A

摘要:

开展了原竹材料抗弯性能试验,探究了竹材抗弯强度和弹性模量与高度、壁厚、周长的关系,采用Bootstrap法分析了竹材抗弯强度标准值,基于可靠度理论研究了原竹材料的抗弯强度设计值。结果表明:竹片抗弯加载经历较长的弹性阶段,塑性阶段较短,竹材抗弯承载力随高度增加而减小; 竹片抗弯强度和弹性模量随高度增加而增大,随壁厚和周长增大而减小,竹片抗弯强度、弹性模量与高度、壁厚和周长具有较好的拟合优度,拟合公式可对竹材力学性能进行预测; 样本数量对竹材抗弯强度的抽样误差具有显著影响,通过Bootstrap重抽样法分析标准值能够有效减小误差,采用该法进行10 000次重抽样分析得到的原竹材料强度标准值为126.75 MPa; 可靠度指标β随抗力分项系数γ_R和荷载比ρ的增大而增大; 荷载比ρ>0时,目标可靠度下的抗力分项系数γ_R在恒载+雪荷载情况下最大,在恒载+办公楼面活荷载情况下最小,计算得到的3个安全等级下的原竹材料抗弯强度设计值分别为27.670,29.884,32.084 MPa。

Abstract:

The bending resistance test of the original bamboo material was carried out, the relationship between the bending strength, elastic modulus of bamboo and the height, wall thickness, and circumference was explored. The Bootstrap method was used to analyze the standard value of bending strength of bamboo. Based on the reliability theory, the design value of bending strength of the original bamboo material was calculated. The results show that the bending loading of bamboo slices goes through a longer elastic stage, and the plastic stage is shorter. The bending bearing capacity of bamboo decreases with the increase of height. The bending strength and elastic modulus of bamboo slices increase with the increase of height, and decrease with the increase of the wall thickness and circumference. The bending strength and elastic modulus of bamboo have good goodness of fit with height, wall thickness and circumference. The fitting formula can predict the mechanical properties of bamboo. The number of samples has a significant impact on the sampling error of the bending strength of bamboo. The standard value of the Bootstrap re-sampling method can effectively reduce the error. The standard value of original bamboo material strength obtained by the method for 10 000 re-sampling analysis is 126.75 MPa. The reliability index β increases with the increase of the resistance sub-factor γ_R and the load ratio ρ. When the load ratio ρ>0, the resistance sub-factor γ_R under target reliability in the case of dead load + snow load is the largest, and is the smallest in the case of dead load + office floor live load. The calculated bending strength design values of the original bamboo material under the three safety levels are 27.670, 29.884, 32.084 MPa respectively.

参考文献/References:

[1] RASSIAH K,MEGAT AHMAD M M H,ALI A.Mechanical Properties of Laminated Bamboo Strips from Gigantochloa Scortechinii/Polyester Composites[J].Materials & Design,2014,57:551-559.
[2]ZHANG T,WANG A,WANG Q,et al.Bending Characteristics Analysis and Lightweight Design of a Bionic Beam Inspired by Bamboo Structures[J].Thin-walled Structures,2019,142:476-498.
[3]LI H,QIU Z,WU G,et al.Compression Behaviors of Parallel Bamboo Strand Lumber Under Static Loading[J].Journal of Renewable Materials,2019,7(7):583-600.
[4]WANG F,SHAO Z.Study on the Variation Law of Bamboo Fibers' Tensile Properties and the Organization Structure on the Radial Direction of Bamboo Stem[J].Industrial Crops and Products,2020,152:112521.
[5]车慎思.毛竹细观结构与力学性能试验研究[D].南京:南京航空航天大学,2011.
CHE Shen-si.Experimental Research on Microstructure and Mechanical Performance of Bamboo[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2011.
[6]杨宝璋.竹与竹建筑[M].昆明:云南人民出版社,2014.
YANG Bao-zhang.Bamboo and Bamboo Architecture[M].Kunming:Yunnan People's Publishing House,2014.
[7]SASSU M,DE FALCO A,GIRESINI L,et al.Structural Solutions for Low-cost Bamboo Frames:Experimental Tests and Constructive Assessments[J].Materials,2016,9(5):346.
[8]陈 国.现代竹结构房屋的试验研究与工程应用[D].长沙:湖南大学,2011.
CHEN Guo.Experimental Study and Engineering Application of Light Frame Bamboo Structure[D].Changsha:Hunan University,2011.
[9]田黎敏,郝际平,寇跃峰.喷涂保温材料-原竹骨架组合墙体抗震性能研究[J].建筑结构学报,2018,39(6):102-109.
TIAN Li-min,HAO Ji-ping,KOU Yue-feng.Research on Seismic Behavior of Bamboo Framing Walls with Sprayed Thermal Insulation Material[J].Journal of Building Structures,2018,39(6):102-109.
[10]SA RIBEIRO R A,SA RIBEIRO M G,MIRANDA I P A.Bending Strength and Nondestructive Evaluation of Structural Bamboo[J].Construction and Building Materials,2017,146:38-42.
[11]NURMADINA,NUGROHO N,BAHTIAR E T.Structural Grading of Gigantochloa Apus Bamboo Based on Its Flexural Properties[J].Construction and Building Materials,2017,157:1173-1189.
[12]李光荣,辜忠春,李军章.毛竹竹材物理力学性能研究[J].湖北林业科技,2014,43(5):44-49.
LI Guang-rong,GU Zhong-chun,LI Jun-zhang.Study on Physical and Mechanical Performance of Phyllostachy Pubescens[J].Hubei Forestry Science and Technology,2014,43(5):44-49.
[13]于金光,郝际平,田黎敏,等.圆竹的力学性能及影响因素研究[J].西安建筑科技大学学报:自然科学版,2018,50(1):30-36.
YU Jin-guang,HAO Ji-ping,TIAN Li-min,et al.The Study on the Main Influencing Factors and Mechanical Properties of Phyllostachys Pubescens[J].Journal of Xi'an University of Architecture and Technology:Natural Science Edition,2018,50(1):30-36.
[14]张 丹,王 戈,张文福,等.毛竹圆竹力学性能的研究[J].中南林业科技大学学报,2012,32(7):119-123.
ZHANG Dan,WANG Ge,ZHANG Wen-fu,et al.Mechanical Properties of Phyllostachys Pubescens[J].Journal of Central South University of Forestry & Technology,2012,32(7):119-123.
[15]上官蔚蔚.重组竹物理力学性质基础研究[D].北京:中国林业科学研究院,2015.
SHANGGUAN Wei-wei.Research on Physical and Mechanical Properties of Bamboo Scrimber[D].Beijing:Chinese Academy of Forestry,2015.
[16]JG/T 199—2007,建筑用竹材物理力学性能试验方法[S].
JG/T 199—2007,Testing Methods for Physical and Mechanical Properties of Bamboo Used in Building[S].
[17]CECS 434:2016,圆竹结构建筑技术规程[S].
CECS 434:2016,Technical Specification for Round Bamboo-structure Building[S].
[18]GB 50068—2018,建筑结构可靠度设计统一标准[S].
GB 50068—2018,Unified Standard for Reliability Design of Building Structures[S].
[19]钟 永,武国芳,任海青.国产结构用规格材的抗弯强度可靠度分析和设计值[J].建筑结构学报,2018,39(12):119-127.
ZHONG Yong,WU Guo-fang,REN Hai-qing.Reliability Analysis and Design Value on Bending Strength of Domestic Dimension Lumber for Structural Purpose[J].Journal of Building Structures,2018,39(12):119-127.
[20]GB 50005—2017,木结构设计规范[S].
GB 50005—2017,Standard for Design of Timber Structures[S].
[21]肖 岩,杨瑞珍,单 波,等.结构用胶合竹力学性能试验研究[J].建筑结构学报,2012,33(11):150-157.
XIAO Yan,YANG Rui-zhen,SHAN Bo,et al.Experimental Research on Mechanical Properties of Glulam[J].Journal of Building Structures,2012,33(11):150-157.
[22]张秀华,鄂 婧,李玉顺,等.重组竹抗压和抗弯力学性能试验研究[J].工业建筑,2016,46(1):7-12.
ZHANG Xiu-hua,E Jing,LI Yu-shun,et al.Experimental Research on Compression and Flexural Mechanical Performance of Recombinant Bamboo[J].Industrial Construction,2016,46(1):7-12.
[23]肖纲要,李霞镇,钟 永.结构用重组竹抗弯力学性能[J].安徽农业大学学报,2017,44(1):60-64.
XIAO Gang-yao,LI Xia-zhen,ZHONG Yong.Bending Properties of the Structural Recombinant Bamboo[J].Journal of Anhui Agricultural University,2017,44(1):60-64.

相似文献/References:

[1]黄华,刘伯权,贺拴海,等.高强钢绞线网加固RC梁抗弯性能的数值分析[J].建筑科学与工程学报,2012,29(03):40.
　HUANG Hua,LIU Bo-quan,HE Shuan-hai,et al.Numerical Analysis on Flexural Performance of Strengthened RC Beam with High Strength Stainless Steel Wire Mesh[J].Journal of Architecture and Civil Engineering,2012,29(04):40.
[2]王晓刚,顾祥林,张伟平.锈蚀钢筋混凝土梁抗弯性能数值模拟[J].建筑科学与工程学报,2009,26(01):49.
　WANG Xiao-gang,GU Xiang-lin,ZHANG Wei-ping.Numerical Simulation of Flexural Behavior of Corroded Reinforced Concrete Beams[J].Journal of Architecture and Civil Engineering,2009,26(04):49.
[3]李长辉,杨 放,王启材,等.改性合成纤维混凝土弯曲及抗冲击试验[J].建筑科学与工程学报,2022,39(06):24.[doi:10.19815/j.jace.2022.01052]
　LI Chang-hui,YANG Fang,WANG Qi-cai,et al.Bending and Impact Test on Modified Synthetic Fiber Reinforced Concrete[J].Journal of Architecture and Civil Engineering,2022,39(04):24.[doi:10.19815/j.jace.2022.01052]
[4]朱 琦,叶力豪,蔡 玮,等.UHPC-T梁抗弯性能试验研究与理论计算[J].建筑科学与工程学报,2023,40(01):65.[doi:10.19815/j.jace.2021.08086]
　ZHU Qi,YE Lihao,CAI Wei,et al.Experimental study and theoretical calculation on flexural performance of UHPC-T beams[J].Journal of Architecture and Civil Engineering,2023,40(04):65.[doi:10.19815/j.jace.2021.08086]
[5]冯庆兴,林皇诚,龚顺风.带缺陷T形截面叠合梁抗弯性能研究[J].建筑科学与工程学报,2023,40(04):70.[doi:10.19815/j.jace.2021.11105]
　FENG Qingxing,LIN Huangcheng,GONG Shunfeng.Study on flexural performance of T-shaped composite beams with defects[J].Journal of Architecture and Civil Engineering,2023,40(04):70.[doi:10.19815/j.jace.2021.11105]

备注/Memo

备注/Memo:

收稿日期:2021-03-23
基金项目:国家重点研发计划项目(2017YFC0703500)
作者简介:刘鹏程(1994-),男,江西赣州人,工学博士研究生,E-mail:liupengcheng@csu.edu.cn。
通信作者:周期石(1972-),男,湖南嘉禾人,教授,博士研究生导师,工学博士,E-mail:qishizhou@csu.edu.cn。

常用功能

更新日期/Last Update: 2021-07-10