«上一篇/Previous Article|本期目录/Table of Contents|下一篇/Next Article»

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:

39卷

期数:

2022年01期

页码:

77-86

栏目:

钢结构

出版日期:

2022-02-15

文章信息/Info

Title:

Study on Hysteretic Behavior of AAC Masonry Infill Wall with Circular-arc Openings at Corners Embedded in Steel Frame

文章编号:

1673-2049(2022)01-0077-10

作者:

郁有升,郭亚楠

(青岛理工大学 土木工程学院,山东 青岛 266033)

Author(s):

YU You-sheng, GUO Ya-nan

(School of Civil Engineering, Qingdao University of Technology, Qingdao 266033, Shandong, China)

关键词:

蒸压轻质加气混凝土;  填充墙;  钢框架;  相互作用;  角部圆弧缺口;  滞回性能

Keywords:

autoclaved lightweight aerated concrete;  infill wall;  steel frame;  interaction;  circular-arc opening at the corner;  hysteretic behavior

分类号:

TU398

DOI:

10.19815/j.jace.2020.12062

文献标志码:

A

摘要:

基于在填充墙的角部设置缺口可弱化拉(压)力带的原理,设计了一系列钢框架内嵌角部圆弧缺口填充墙试件,包括1个纯钢框架、1个无缺口蒸压轻质加气混凝土(AAC)砌体填充墙钢框架和9个带不同尺寸圆弧缺口的AAC砌体填充墙钢框架,采用ABAQUS软件对各试件进行了有限元模拟分析。研究了填充墙角部设置的圆弧缺口构造对钢框架滞回性能、承载能力、延性、刚度退化、强度退化及耗能能力的影响。结果表明:填充墙角部设置的圆弧缺口构造可以削弱AAC砌体填充墙对钢框架承载能力的贡献,有效延缓墙体破坏,降低墙体对钢框架的附加刚度,延缓AAC砌体填充墙钢框架的刚度退化速率; 填充墙角部设置的圆弧缺口构造还能改变AAC砌体填充墙的破坏模式; 根据有限元分析结果,建议圆弧缺口的弧长为πl/2,圆弧半径l为AAC砌体填充墙高度的1/10～1/7。

Abstract:

Based on the principle that setting openings at the corners of the infill wall could weaken the tension(compression)band, a series of specimens of infill wall with circular-arc openings at the corners embedded in steel frame were designed, including one pure steel frame, one autoclaved lightweight aerated concrete(AAC)masonry infilled steel frame without opening, nine AAC masonry infilled steel frame with different sizes circular-arc openings. The finite element analysis of each specimen was carried out by ABAQUS software. The influence of circular-arc openings at the corners of the infill wall on the hysteretic behavior, load-bearing capacity, ductility, stiffness degradation, strength degradation and energy dissipation capacity of steel frames were studied. The results show that the circular-arc openings at the corners of the infill wall can weaken the contribution of AAC masonry infill wall to the load-bearing capacity of steel frame, effectively delay the failure of the infill wall, reduce the additional stiffness of the infill wall for the steel frame structures, and delay the stiffness degradation rate of AAC masonry infill wall embedded in steel frame.The circular-arc openings can also change the failure mode of the AAC masonry infill wall. According to the results of finite element analysis, it is suggested that the arc length of circular-arc openings is πl/2 and the radius l is 1/10-1/7 of the height of AAC masonry infill wall.

参考文献/References:

[1] 王元清,石永久.多层轻型房屋钢结构的设计与应用研究[J].建筑结构,1999,29(6):6-8,55.
WANG Yuan-qing,SHI Yong-jiu.Application and Design of Light Steel Structure[J].Building Structure,1999,29(6):6-8,55.
[2]SCHEUER C,KEOLEIAN G A,REPPE P.Life Cycle Energy and Environmental Performance of a New University Building:Modeling Challenges and Design Implications[J].Energy and Buildings,2003,35(10):1049-1064.
[3]谷 倩,彭 波,刘肖凡.钢框架-砌体填充墙结构三支杆模型有限元分析[J].武汉大学学报(工学版),2006,39(5):30-34.
GU Qian,PENG Bo,LIU Xiao-fan.Finite Element Analysis of Three Strut Model for Masonry-infilled Steel Frames[J].Engineering Journal of Wuhan University,2006,39(5):30-34.
[4]NEGRO P,COLOMBO A.Irregularities Induced by Nonstructural Masonry Panels in Framed Buildings[J].Engineering Structures,1997,19(7):576-585.
[5]李英民,韩 军,田启祥,等.填充墙对框架结构抗震性能的影响[J].地震工程与工程振动,2009,29(3):51-58.
LI Ying-min,HAN Jun,TIAN Qi-xiang,et al.Study on Influence of Infilled Walls on Seismic Performance of RC Frame Structures[J].Earthquake Engineering and Engineering Dynamics,2009,29(3):51-58.
[6]田志昌,韩建忠,朱梅生.耗能框架填充墙的设计和实验[J].包头钢铁学院学报,1997,16(4):294-298.
TIAN Zhi-chang,HAN Jian-zhong,ZHU Mei-sheng.Design and Experiment of Energy Dissipating Wall Filled in Frames[J].Journal of Baotou University of Iron and Steel Technology,1997,16(4):294-298.
[7]梅 黎.双功能带缝填充墙[J].科技信息,2009(28):332-333,335.
MEI Li.Double Function Infilled Wall with Slits[J].Science & Technology Information,2009(28):332-333,335.
[8]周 云,彭水淋,郭阳照,等.提高框架填充墙结构抗震性能的新途径和新方法[J].防灾减灾工程学报,2011,31(5):469-476.
ZHOU Yun,PENG Shui-lin,GUO Yang-zhao,et al.New Ways and Methods to Improve the Seismic Performance of Frame Structures with Infilled Walls[J].Journal of Disaster Prevention and Mitigation Engineering,2011,31(5):469-476.
[9]唐兴荣,刘利花,周振轶,等.带竖缝砌体填充墙钢筋混凝土框架结构抗震性能试验研究[J].建筑结构学报,2012,33(10):84-93.
TANG Xing-rong,LIU Li-hua,ZHOU Zhen-yi,et al.Experimental Study on Seismic Behavior of Slitted Masonry In-filled Reinforced Concrete Frame Structure[J].Journal of Building Structures,2012,33(10):84-93.
[10]李艳艳,陈艳风,韩红霞,等.带缝填充墙框架结构抗震性能试验研究[J].工业建筑,2013,43(2):14-17,23.
LI Yan-yan,CHEN Yan-feng,HAN Hong-xia,et al.Experimental Study on Seismic Behavior of Infilled Frame Structures with Slit[J].Industrial Construction,2013,43(2):14-17,23.
[11]JIANG H J,LIU X J,MAO J J.Full-scale Experimental Study on Masonry Infilled RC Moment-resisting Frames Under Cyclic Loads[J].Engineering Structures,2015,91:70-84.
[12]SUN G H,HE R Q,GU Q,et al.Cyclic Behavior of Partially-restrained Steel Frame with RC Infill Walls[J].Journal of Constructional Steel Research,2011,67(12):1821-1834.
[13]SUN G H,GU Q,LI Q C,et al.Experimental and Numerical Study on the Hysteretic Behavior of Composite Partially Restrained Steel Frame-reinforced Concrete Infill Walls with Vertical Slits[J].Bulletin of Earthquake Engineering,2018,16(3):1245-1272.
[14]YUEN T Y P,ZHANG H H,KUANG J S,et al.Shake Table Tests on RC Frame Infilled by Slitted Masonry Panels[J].Bulletin of Earthquake Engineering,2018,16(9):4027-4052.
[15]郁有升,梅 灿,雷 鸣,等.CCA内嵌EPS混凝土填充墙钢框架结构受力性能试验研究及有限元分析[J].建筑结构学报,2019,40(6):89-98.
YU You-sheng,MEI Can,LEI Ming,et al.Experimental Study and Finite Element Analysis on Mechanical Performance of Steel Frame with CCA and EPS Concrete Walls[J].Journal of Building Structures,2019,40(6):89-98.
[16]郁有升,雷 鸣,梅 灿.I型缝CCA板填充墙钢框架试验和有限元分析[J].建筑钢结构进展,2019,21(1):36-44.
YU You-sheng,LEI Ming,MEI Can.Experimental Study and Finite Element Analysis on the Mechanical Properties of I-Shaped CCA Sheets In-filled Steel Frame Structures[J].Progress in Steel Building Structures,2019,21(1):36-44.
[17]王玉镯,傅传国.ABAQUS结构工程分析及实例详解[M].北京:中国建筑工业出版社,2010.
WANG Yu-zhuo,FU Chuan-guo.Structural Engineering Analysis and Example Explanation of ABAQUS[M].Beijing:China Architecture & Building Press,2010.
[18]刘鑫宇.钢框架梁柱“上焊下栓”节点抗震性能试验及有限元研究[D].青岛:青岛理工大学,2019.
LIU Xin-yu.Experimental and Finite Element Study on Seismic Behavior of the “Upper Flange Welded-lower Flange Bolted” Beam-column Connection[D].Qingdao:Qingdao University of Technology,2019.
[19]朱伯龙.砌体结构设计原理[M].上海:同济大学出版社,1991.
ZHU Bo-long.Design Principle of Masonry Structure[M].Shanghai:Tongji University Press,1991.
[20]Seismic Provisions for Structural Steel Buildings:ANSI/AISC 341-10[S].Chicago:AISC,2012.
[21]梅 灿.X型CCA板填充墙钢框架试验及有限元研究[D].青岛:青岛理工大学,2017.
MEI Can.Experimental Study and Finite Element Analysis of Steel Frame with “X” CCA Walls[D].Qingdao:Qingdao University of Technology,2017.

相似文献/References:

[1]吴昊,林城.两层单跨缩尺RC框架结构外爆炸试验数值模拟[J].建筑科学与工程学报,2022,39(03):111.[doi:10.19815/j.jace.2021.07016]
　WU Hao,LIN Cheng.Numerical Simulation on External Explosion Experiments of Two-story Single-span Scaled RC Frame Structure[J].Journal of Architecture and Civil Engineering,2022,39(01):111.[doi:10.19815/j.jace.2021.07016]

备注/Memo

备注/Memo:

收稿日期:2021-04-11
基金项目:山东省自然科学基金项目(ZR2017MEE068)
作者简介:郁有升(1976-),男,山东临沂人,副教授,工学博士,E-mail:yuyousheng@126.com。

常用功能

更新日期/Last Update: 2021-02-10