|Table of Contents|

Strut-and-tie Model of Deep Beam Design Subjected to Two Movable Loads(PDF)

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

Issue:
2008年04期
Page:
58-64
Research Field:
Publishing date:
2008-12-20

Info

Title:
Strut-and-tie Model of Deep Beam Design Subjected to Two Movable Loads
Author(s):
LIN Yuan GONG Jin-xin LI Rong-qing
School of Civil and Hydraulic Engineering, Dalian University of Technology, Dalian 116024, Liaoning, China
Keywords:
structural engineering strut-and-tie model deep beam reinforced concrete movable load bearing capacity
PACS:
TU375.1
DOI:
-
Abstract:
Reinforced concrete deep beams subjected to two movable loads with constant distance were designed using strut-and-tie model, making it possible to design based on reasonable theory. Strut-and-tie model of topology change for deep beams with two applied loads were properly established and the equations for computing tension in tie and compression in strut were developed. An example was included to demonstrate its use. The results show that the tension in tie approachs maximum when the loads move to a certain location close to mid-span, which will determine the required area of longitudinal tension reinforcement; and the compression in strut approachs maximum when the loads move to a certain location close to support, which will determine the geometry of the deep beam and the compression strength of concrete.

References:

[1] 贡金鑫,魏巍巍,胡家顺.中美欧混凝土结构设计[M].北京:中国建筑工业出版社,2007. GONG Jin-xin,WEI Wei-wei,HU Jia-shun.Concrete Structure Design in China,US and Europe[M].Beijing:China Architecture & Building Press,2007.
[2]ACI 318-05,Building Code Requirements for Structural Concrete and Commentary[S].
[3]AASHTO2007,LRFD Bridge Design Specifications[S].
[4]EN 1992-1-1:2004,Design of Concrete Structures[S].
[5]CSAA 233-94,Design of Concrete Structures[S].
[6]林 园,贡金鑫,李荣庆.移动荷载下钢筋混凝土深梁基于压杆-拉杆模型的设计[C]//宋玉普,贾金青.全国第十届混凝土基本理论及工程应用学术会议论文集.北京:中国建筑工业出版社,2008:978-984. LIN Yuan,GONG Jin-xin,LI Rong-qing. Design of Reinforced Concrete Deep Beam Subjected to Movable Loads Based on Strut-and-tie Model[C]//SONG Yu-pu,JIA Jin-qing.Proceedings of the 10th Chinese Conference on Concrete Basic Theory and Its Application.Beijing:China Architecture & Building Press,2008:978-984.
[7]朱劲松,宋玉普.定侧压混凝土双轴拉-压疲劳累积损伤试验研究[J].中国公路学报,2005,18(1):40-45. ZHU Jin-song,SONG Yu-pu.Experimental Research on Fatigue Cumulative Damage of Concrete Under Cyclic Tension-compression with Constant Confined Stress[J].China Journal of Highway and Transport,2005,18(1):40-45.
[8]楼铁炯,郭乙木,王振林,等.任意截面无粘结预应力混凝土梁的极限非线性分析[J].中国公路学报,2005,18(1):77-80. LOU Tie-jiong,GUO Yi-mu,WANG Zhen-lin,et al.Nonlinear Analysis of Unbonded Prestressed Beams with Arbitrary Section at Ultimate[J].China Journal of Highway and Transport,2005,18(1):77-80.
[9]郑一峰,黄 侨,冷曦晨.预弯组合梁桥的弹塑性极限承载能力研究[J].中国公路学报,2005,18(4):54-58. ZHENG Yi-feng,HUANG Qiao,LENG Xi-chen.Research on Elastic-plastic Ultimate Capacity of Preflex Beam Bridges[J].China Journal of Highway and Transport,2005,18(4):54-58.
[10]郑 宏,杨飞颖,张维刚.钢板深梁屈曲分析[J].建筑科学与工程学报,2007,24(3):31-35. ZHENG Hong,YANG Fei-ying,ZHANG Wei-gang.Buckling Analysis on Steel Plate Deep Beam[J].Journal of Architecture and Civil Engineering,2007,24(3):31-35.
[11]王爱勤.弹性半空间地基上梁的静力弯曲解析解[J].长安大学学报:自然科学版,2008,28(5):73-76. WANG Ai-qin.Analytic Solution of Beams Loaded Vertical Force on Elastic Half Space[J].Journal of Chang'an University:Natural Science Edition,2008,28(5):73-76.

Memo

Memo:
-
Last Update: 2008-12-20