|本期目录/Table of Contents|

[1]张 敏,刘艳萍,邱秀丽,等.装配式混凝土U型钢筋环扣连接技术应用研究[J].建筑科学与工程学报,2022,39(01):14-24.[doi:10.19815/j.jace.2021.04020]
　ZHANG Min,LIU Yan-ping,QIU Xiu-li,et al.Application Research on Prefabricated Concrete U-shaped Reinforcement Buckle Connection Technology[J].Journal of Architecture and Civil Engineering,2022,39(01):14-24.[doi:10.19815/j.jace.2021.04020]
点击复制

装配式混凝土U型钢筋环扣连接技术应用研究(PDF)
分享到：

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:
39卷
期数:
2022年01期
页码:
14-24
栏目:
出版日期:
2022-02-15

文章信息/Info

Title:
Application Research on Prefabricated Concrete U-shaped Reinforcement Buckle Connection Technology
文章编号:
1673-2049(2022)01-0014-11
作者:
张 敏1,2,刘艳萍1,2,邱秀丽3,卢 旦4,陈宜虎3,秦 稳1,2,5,孟庆鹏1,2
(1. 桂林理工大学 土木与建筑工程学院,广西 桂林 541004; 2. 桂林理工大学 广西建筑新能源与节能重点实验室,广西 桂林 541004; 3. 贺州学院 建筑与电气工程学院,广西 贺州 542899; 4. 华东建筑设计研究院有限公司,上海 200002; 5. 中国建筑第五工程局有限公司,湖南 长沙 410004)
Author(s):
ZHANG Min1,2, LIU Yan-ping1,2, QIU Xiu-li3, LU Dan4, CHEN Yi-hu3, QIN Wen1,2,5, MENG Qing-peng1,2
关键词:
装配式结构;  梁柱节点;  拟静力试验;  抗震
Keywords:
prefabricated construction;  beam-column joint;  quasi-static test;  anti-seismic
分类号:
TU756
DOI:
10.19815/j.jace.2021.04020
文献标志码:
A
摘要:
研发了一种装配式混凝土U型钢筋环扣连接技术,对采用4种不同连接方式的试件进行拟静力试验,观察试验现象及破坏形态,分析各种连接的刚度、延性、滞回性能、耗能能力等。结果表明:U型环扣连接节点的承载力较现浇节点有很大程度提高,且连接部位破坏时钢筋未达到屈服,尚有较大优化空间; 采用90°弯锚连接节点的搭接钢筋在往复荷载作用下的承载力等同于现浇节点,在延性、刚度退化、耗能能力等方面比现浇节点和U型环扣搭接方式差一些,未能在混凝土中实现有效锚固,混凝土压碎时搭接钢筋未屈服; 采用U型环扣搭接方式虽然在延性方面较现浇节点差,但是承载力和刚度退化方面表现均优于现浇节点; U型环扣连接方式的试件存在钢筋排布密集的问题,混凝土对钢筋的握裹能力较弱,搭接区域的混凝土较早损伤破坏; 对比一次性搭接方式,U型环扣分批搭接方式对混凝土的局部损伤更小,连接的延性和耗能能力更优; 采用分批搭接方式的构件受力钢筋在搭接处为受拉屈服,滞回环饱满,受力状态良好,是提高U型环扣连接的有效措施之一。
Abstract:
A prefabricated concrete U-shaped reinforcement buckle connection technology was developed, and the pseudo-static tests on specimens that adopted 4 different connection methods were conducted. The test phenomena and failure modes were observed, and the stiffness, ductility, and hysteresis behavior, energy consumption of various connections were analyzed. The results show that the bearing capacity of the U-shaped buckle connection node is much higher than that of the cast-in-place node, and the steel bar does not reach yield when the connection part fails, and there is still a large room for optimization. The overlapped steel bar of the 90° bend anchor connection node is equivalent to cast-in-place joints in terms of bearing capacity under the reciprocating load, and it is inferior to cast-in-place joint and U-shaped buckle connection in terms of ductility, stiffness, and energy dissipation capacity. It has not achieved effective anchorage in concrete, when the concrete is crushed, the overlapped steel bars are not yielded. Although the U-shaped buckle connection node is inferior to the cast-in-place joint in terms of ductility, it is better than the in-situ joint in terms of bearing capacity and stiffness degradation. The specimens that adopted U-shaped buckle connection have the problem of densely arranged steel bars, so the ability of concrete to hold the steel bars is weak, and the concrete in the overlap area is damaged and destroyed earlier. Compared with the U-shaped buckle one-time overlap method, the U-shaped buckle batch overlap method has less local damage to the concrete, and the ductility and energy dissipation capacity of the connection are better. The stressed steel bar of the component that adopts the batch overlap method is tensile yielded at the overlap joint, the hysteretic loop is full, and the force state is good. Therefore, batch overlap is one of the effective measures to improve the U-shaped buckle connection.

参考文献/References:

[1] PARK R.Seismic Design and Construction of Precast Concrete Buildings in New Zealand[J].PCI Journal,2002,47(5):60-75.
[2]KORKMAZ H H,TANKUT T.Performance of a Precast Concrete Beam-to-beam Connection Subject to Reversed Cyclic Loading[J].Engineering Structures,2005,27(9):1392-1407.
[3]张 瀑,鲁兆红,淡 浩.汶川地震中预制装配整体结构的震害调查分析[J].四川建筑科学研究,2010,36(3):129-133.
ZHANG Pu,LU Zhao-hong,DAN Hao.The Survey Analysis of Prefabricated Structure in Wenchuan Earthquake[J].Sichuan Building Science,2010,36(3):129-133.
[4]预制装配整体式钢筋混凝土技术规范:SJG 18—2009[S].北京:中国建筑工业出版社,2009.
Technical Specification for Concrete Structures with Precast Components:SJG 18—2009[S].Beijing:China Architecture & Building Press, 2009.
[5]预制预应力混凝土装配整体式框架结构技术规程:JGJ 224—2010[S].北京:中国建筑工业出版社,2010.
Technical Specification for Framed Structures Comprised of Precast Prestressed Concrete Components:JGJ 224—2010[S].Beijing:China Architecture & Building Press, 2010.
[6]NEHPR Recommended Provisions for the Development of Seismic Regulations for New Buildings and Other Structures:FEMA 368/369[S].Washington DC:BSSC,2000.
[7]张立波.高层建筑设计施工规范与新技术应用实务全书[M].北京:海洋出版社,2000.
ZHANG Li-bo.Construction Specification for Design of High-rise Buildings and New Technology Application Guidelines[M].Beijing:Ocean Press,2000.
[8]赵 斌,吕西林,刘丽珍.全装配式预制混凝土结构梁柱组合件抗震性能试验研究[J].地震工程与工程振动,2005,25(1):81-87.
ZHAO Bin,Lü Xi-lin,LIU Li-zhen.Experimental Study on Seismic Behavior of Precast Concrete Beam-column Subassemblage with Fully Assembled Joint[J].Earthquake Engineering and Engineering Dynamics,2005,25(1):81-87.
[9]谷 伟,张馨心,李忠培,等.装配式框架结构新型梁柱节点抗震性能试验[J].工业建筑,2019,49(5):57-61.
GU Wei,ZHANG Xin-xin,LI Zhong-pei,et al.Experimental Research on Seismic Behavior of New Column-to-beam Joints for Prefabricated Concrete Frame[J].Industrial Construction,2019,49(5):57-61.
[10]吴 刚,冯德成.装配式混凝土框架节点基本性能研究进展[J].建筑结构学报,2018,39(2):1-16.
WU Gang,FENG De-cheng.Research Progress on Fundamental Performance of Precast Concrete Frame Beam-to-column Connections[J].Journal of Building Structures,2018,39(2):1-16.
[11]管东芝,郭正兴,于建兵,等.钢绞线锚入式预制砼框架节点构造及试验[J].浙江大学学报(工学版),2016,52(2):282-291.
GUAN Dong-zhi,GUO Zheng-xing,YU Jian-bing,et al.Structural Measures and Experimental Study of Precast Concrete Joints of Anchored Prestressing Strands in Frames[J].Journal of Zhejiang University(Engineering Science),2016,52(2):282-291.
[12]KHOO J H,LI B,YIP W K.Tests on Precast Concrete Frames with Connections Constructed Away from Column Faces:Engineering Science[J].ACI Structural Journal,2006,103(1):1827.
[13]章一萍,隗 萍,张春雷,等.新型装配式混凝土框架结构后浇整体式梁柱节点研究[J].四川建筑科学研究,2017,43(3):110-115.
ZHANG Yi-ping,WEI Ping,ZHANG Chun-lei,et al.Study on New Cast-in-situ Monolithic Beam-column Connections for Precast Frame Structure[J].Sichuan Building Science,2017,43(3):110-115.
[14]袁鑫杰,李 易,陆新征,等.湿式连接装配式混凝土框架抗连续倒塌静力试验研究[J].土木工程学报,2019,52(12):46-56.
YUAN Xin-jie,LI Yi,LU Xin-zheng,et al.Static Progressive Collapse Test on Prefabricated Concrete Frames with Wet Connections[J].China Civil Engineering Journal,2019,52(12):46-56.
[15]RESTREPO J I,PARK R,BUCHANAN A H.Tests on Connections of Earthquake Resisting Precast Reinforced Concrete Perimeter Frames of Buildings[J].PCI Journal,1995,40(4):44-61.
[16]YEE A A.Design Considerations for Prestressed Concrete Building Structures in Seismic Areas[J].PCI Journal,1991,36(3):40-55.
[17]陈宜虎,卢 旦,张 敏,等.装配式混凝土梁柱节点U型钢筋环扣连接性能研究[J].广西大学学报(自然科学版),2019,44(6):1552-1561.
CHEN Yi-hu,LU Dan,ZHANG Min,et al.Study on Ring Buckle Connection with U-shaped Steel in Precast Concrete Beam-column Joints[J].Journal of Guangxi University(Natural Science Edition),2019,44(6):1552-1561.
[18]混凝土结构设计规范:GB 50010—2010[S].北京:中国建筑工业出版社,2010.
Code for Design of Concrete Structures:GB 50010—2010[S].Beijing:China Architecture & Building Press,2010.
[19]建筑抗震设计规范:GB 50011—2010[S].北京:中国建筑工业出版社,2010.
Code for Seismic Design of Buildings:GB 50011—2010[S].Beijing:China Architecture & Building Press,2010.
[20]建筑抗震试验规程:JGJ/T 101—2015[S].北京:中国建筑工业出版社,2015.
Specification for Building Seismic Test of Buildings:JGJ/T 101—2015[S].Beijing:China Architecture & Building Press,2015.

相似文献/References:

[1]周天华,吴函恒,白亮,等.钢框架-预制混凝土抗侧力墙装配式结构体系[J].建筑科学与工程学报,2013,30(03):1.
　ZHOU Tian-hua,WU Han-heng,BAI Liang,et al.Fabricated Structural System of Steel Frame-prefabricated Concrete Lateral Resistance Wall[J].Journal of Architecture and Civil Engineering,2013,30(01):1.
[2]郑 宏,方贤禄,苏耀烜,等.局部可更换钢框架梁-柱节点受力性能研究[J].建筑科学与工程学报,2021,38(02):47.[doi:10.19815/j.jace.2020.07030]
　ZHENG Hong,FANG Xian-lu,SU Yao-xuan,et al.Study on Mechanical Behavior of Partially Replaceable Steel Frame Beam-column Joints[J].Journal of Architecture and Civil Engineering,2021,38(01):47.[doi:10.19815/j.jace.2020.07030]
[3]张富宾,肖建庄,丁红梅,等.装配式混凝土结构防水技术现状及发展趋势[J].建筑科学与工程学报,2022,39(01):1.[doi:10.19815/j.jace.2021.05001]
　ZHANG Fu-bin,XIAO Jian-zhuang,DING Hong-mei,et al.Current Status and Development Trend of Prefabricated Structure Waterproof Technology[J].Journal of Architecture and Civil Engineering,2022,39(01):1.[doi:10.19815/j.jace.2021.05001]
[4]易伟建,古 攀.混凝土梁柱节点带锚固板钢筋锚固性能试验研究[J].建筑科学与工程学报,2024,41(01):83.[doi:10.19815/j.jace.2022.03023]
　YI Weijian,GU Pan.Experimental research on anchorage performance of headed reinforcement in concrete beam-column joints[J].Journal of Architecture and Civil Engineering,2024,41(01):83.[doi:10.19815/j.jace.2022.03023]
[5]程卫红,肖从真,田春雨,等.部分无黏结螺杆连接梁柱节点的恢复力模型研究[J].建筑科学与工程学报,2024,41(03):98.[doi:10.19815/j.jace.2022.05071]
　CHENG Weihong,XIAO Congzhen,TIAN Chunyu,et al.Study of restoring force model on beam-to-column assembled joint connected with partially unbounded bar[J].Journal of Architecture and Civil Engineering,2024,41(01):98.[doi:10.19815/j.jace.2022.05071]

备注/Memo

备注/Memo:
收稿日期:2021-04-07
基金项目:国家重点研发计划项目(2016YFC0701902-4); 广西自然科学基金项目(2018GXNSFAA050145); 贺州市创新驱动发展专项项目(贺科创ZX1907002,PT1907009); 广西科学技术计划项目(桂建科[2020]5号); 广西高校中青年教师科研基础能力提升项目(2020KY06030,2021KY0712)
作者简介:张 敏(1980-),男,江西吉安人,教授,工学博士,E-mail:emailzm@126.com。
通信作者:邱秀丽(1987-),女,广西贺州人,讲师,E-mail:344730009@qq.com。
更新日期/Last Update: 2021-02-10