|本期目录/Table of Contents|

[1]郑 宏,方贤禄,苏耀烜,等.局部可更换钢框架梁-柱节点受力性能研究[J].建筑科学与工程学报,2021,38(02):47-59.[doi:10.19815/j.jace.2020.07030]
　ZHENG Hong,FANG Xian-lu,SU Yao-xuan,et al.Study on Mechanical Behavior of Partially Replaceable Steel Frame Beam-column Joints[J].Journal of Architecture and Civil Engineering,2021,38(02):47-59.[doi:10.19815/j.jace.2020.07030]
点击复制

局部可更换钢框架梁-柱节点受力性能研究(PDF)
分享到：

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:
38卷
期数:
2021年02期
页码:
47-59
栏目:
出版日期:
2021-03-25

文章信息/Info

Title:
Study on Mechanical Behavior of Partially Replaceable Steel Frame Beam-column Joints
文章编号:
1673-2049(2021)02-0047-13
作者:
郑 宏,方贤禄,苏耀烜,彭志明
长安大学 建筑工程学院,陕西 西安 710061
Author(s):
ZHENG Hong, FANG Xian-lu, SU Yao-xuan, PENG Zhi-ming
School of Civil Engineering, Chang'an University, Xi'an 710061, Shaanxi, China
关键词:
钢框架;  滞回性能;  数值模拟;  梁柱节点;  耗能能力
Keywords:
steel frame;  hysteretic behavior;  numerical simulation;  beam-column joint;  energy consumption capacity
分类号:
TU311
DOI:
10.19815/j.jace.2020.07030
文献标志码:
A
摘要:
基于保险丝和塑性铰外移理念,将外伸端板连接、削弱型和拼接型连接的优点进行整合,提出一种局部可更换钢框架梁-柱连接节点。选取端板连接和拼接节点2个典型试验进行模拟,验证有限元建模过程的可靠性,然后对试件进行变参数分析,研究短梁翼缘削弱深度、削弱长度、短梁长度对节点承载力、耗能能力及延性的影响。结果表明:通过对H型短梁翼缘削弱,实现了塑性铰外移的目的,使地震作用下的塑性变形主要集中于短梁上,其他构件保持弹性,具有良好的震后恢复能力; 参数对节点力学性能的影响程度由大到小依次为削弱深度、削弱长度、短梁长度,随着翼缘削弱深度的增大,节点的承载力有明显降低,而耗能能力和延性有所提高; 同时随着翼缘削弱长度的增大,节点的最大承载力有所减小,而延性系数有所增大; 短梁长度对节点力学性能的影响基本可忽略不计。
Abstract:
Based on the concept of fuse and plastic hinge outward movement, the extending end plates were connected integrating the advantages of weakened and spliced connections, a locally replaceable steel frame beam-column connection node was proposed. Two typical tests of end plate connection and splicing joint were selected for simulation to verify the reliability of the finite element modeling process, and then the specimen was analyzed with variable parameters to study the influence of the weakening depth, weakening length, and short beam length of the short beam flange on the bearing capacity, energy consumption capacity and ductility. The results show that by weakening the flanges of the H-shaped short beams, the plastic hinges are moved outwards, so that the plastic deformation under the earthquake is mainly concentrated on the short beams, and other components maintain elasticity and have good post-earthquake recovery capabilities. The degree of influence of parameters on the mechanical properties of the joint from large to small is weakening depth, weakening length, short beam length. As the flange weakening depth increases, the bearing capacity of the joint is significantly reduced, while the energy consumption and ductility are improved. At the same time, as the value of the weakened flange length increases, the maximum bearing capacity of the joint decreases, and the ductility coefficient increases. The influence of the short beam length on the mechanical properties of the joint is basically negligible.

参考文献/References:

[1] 周 颖,吴 浩,顾安琪.地震工程:从抗震、减隔震到可恢复性[J].工程力学,2019,36(6):1-12.
ZHOU Ying,WU Hao,GU An-qi.Earthquake Engineering:From Earthquake Resistance,Energy Dissipation,and Isolation, to Resilience[J].Engineering Mechanics,2019,36(6):1-12.
[2]徐 建,岳清瑞,曾 滨,等.工业建筑抗震关键技术研究[J].土木工程学报,2018,51(11):1-7.
XU Jian,YUE Qing-rui,ZENG Bin,et al.Research on Key Technologies for Seismic Design of Industrial Buildings[J].China Civil Engineering Journal,2018,51(11):1-7.
[3]CIMELLARO G P,RENSCHLER C,REINHORN A M,et al.Peoples:A Framework for Evaluating Resilience[J].Journal of Structural Engineering,2016,142(10):04016063.
[4]CIMELLARO G P,REINHORN A M,BRUNEAU M.Framework for Analytical Quantification of Disaster Resilience[J].Engineering Structures,2010,32(11):3639-3649.
[5]陈 杰.钢结构焊接翼缘板加强式梁柱刚性连接的试验研究[D].西安:西安建筑科技大学,2006.
CHEN Jie.Experiment on Welded Flange Plate(WFP)Reinforced Connection[D].Xi'an:Xi'an University of Architecture and Technology,2006.
[6]王 燕,冯 双,王玉田,等.钢框架梁翼缘加强型节点低周反复荷载试验研究[J].建筑结构学报,2010,31(增1):108-114.
WANG Yan,FENG Shuang,WANG Yu-tian,et al.Experimental Study on Beam-flange-strengthened Connections of Steel Frames Under Low-cyclic Loading[J].Journal of Building Structures,2010,31(S1):108-114.
[7]樊宝锋,章梓茂,杨庆山.钢框架梁柱端板连接腹板开孔型节点的受力特性[J].北京交通大学学报,2009,33(4):78-82.
FAN Bao-feng,ZHANG Zi-mao,YANG Qing-shan.Stress Characteristics of Beam-to-column End-plate Connections with Web Opening in Steel Structures[J].Journal of Beijing Jiaotong University,2009,33(4):78-82.
[8]王 湛,潘建荣,郑霖强,等.带悬臂梁段连接的梁柱节点初始转动刚度研究[J].建筑结构学报,2014,35(增1):9-17.
WANG Zhan,PAN Jian-rong,ZHENG Lin-qiang,et al.Initial Rotational Stiffness of Semi-rigid Connections in Steel Column-tree Moment-resisting Frames[J].Journal of Building Structures,2014,35(S1):9-17.
[9]吕西林,武大洋,周 颖.可恢复功能防震结构研究进展[J].建筑结构学报,2019,40(2):1-15.
LU Xi-lin,WU Da-yang,ZHOU Ying.State-of-the-art of Earthquake Resilient Structures[J].Journal of Building Structures,2019,40(2):1-15.
[10]吕西林,陈 云,蒋欢军.可更换连梁保险丝抗震性能试验研究[J].同济大学学报:自然科学版,2013,41(9):1318-1325,1332.
LU Xi-lin,CHEN Yun,JIANG Huan-jun.Experimental Study on Seismic Behavior of “Fuse” of Replaceable Coupling Beam[J].Journal of Tongji University:Natural Science,2013,41(9):1318-1325,1332.
[11]吕西林,陈 聪.带有可更换构件的结构体系研究进展[J].地震工程与工程振动,2014,34(1):27-36.
LU Xi-lin,CHEN Cong.Research Progress in Structural Systems with Replaceable Members[J].Earthquake Engineering and Engineering Dynamics,2014,34(1):27-36.
[12]纪晓东,马琦峰,王彦栋,等.钢连梁可更换消能梁段抗震性能试验研究[J].建筑结构学报,2014,35(6):1-11.
JI Xiao-dong,MA Qi-feng,WANG Yan-dong,et al.Cyclic Tests of Replaceable Shear Links in Steel Coupling Beams[J].Journal of Building Structures,2014,35(6):1-11.
[13]陈以一,贺修樟,柯 珂,等.可更换损伤元结构的特征与关键技术[J].建筑结构学报,2016,37(2):1-10.
CHEN Yi-yi,HE Xiu-zhang,KE Ke,et al.Characteristics and Technical Issues on Structural Systems with Replaceable Damage-concentrated Elements[J].Journal of Building Structures,2016,37(2):1-10.
[14]郭 兵.钢框架梁柱端板连接在循环荷载作用下的破坏机理及抗震设计对策[D].西安:西安建筑科技大学,2002.
GUO Bing.Collapse Mechanism and Design Criterion of Steel Beam-to-column End-plate Connections Under Cyclic Load[D].Xi'an:Xi'an University of Architecture and Technology,2002.
[15]施 刚.钢框架半刚性端板连接的静力和抗震性能研究[D].北京:清华大学,2004.
SHI Gang.Static and Seismic Behavior of Semirigid End-plate Connections in Steel Frames[D].Beijing:Tsinghua University,2004.
[16]OH K,LEE K,CHEN L,et al.Seismic Performance Evaluation of Weak Axis Column-tree Moment Connections with Reduced Beam Section[J].Journal of Constructional Steel Research,2015,105:28-38.
[17]FEMA-267,Interim Guidelines:Evaluation Repair Modification and Design of Steel Moment Frames[S].
[18]ANSI/AISC 341-10,Seismic Provisions for Structural Steel Buildings[S].
[19]徐 超.梁柱端板连接节点域的力学性能及其设计方案研究[D].青岛:青岛理工大学,2015.
XU Chao.Study on Mechanical Properties and Design Scheme of Panel Zones in End-plate Connections with Beams and Columns[D].Qingdao:Qingdao Technological University,2015.
[20]JGJ/T 101—2015,建筑抗震试验规程[S].JGJ/T 101—2015,Specification for Seismic Test of Buildings[S].

相似文献/References:

[1]郑宏,潘天久,卫磊.深梁填充钢框架的发展与研究进展 [J].建筑科学与工程学报,2013,30(04):32.
　ZHENG Hong,PAN Tian-jiu,WEI Lei.Development and Research Progress of Steel Frame Infilled with Deep Beam[J].Journal of Architecture and Civil Engineering,2013,30(02):32.
[2]周天华,吴函恒,白亮,等.钢框架-预制混凝土抗侧力墙装配式结构体系[J].建筑科学与工程学报,2013,30(03):1.
　ZHOU Tian-hua,WU Han-heng,BAI Liang,et al.Fabricated Structural System of Steel Frame-prefabricated Concrete Lateral Resistance Wall[J].Journal of Architecture and Civil Engineering,2013,30(02):1.
[3]徐忠根,梁广贤,邓长根.定位轴线存在偏差的外传力钢框架节点传力板参数分析[J].建筑科学与工程学报,2015,32(02):42.
　XU Zhong-gen,LIANG Guang-xian,DENG Chang-gen.Parameter Analysis of Force-transforming Plates in Outside Steel Frame Joints with Location Axis Deviations[J].Journal of Architecture and Civil Engineering,2015,32(02):42.
[4]卢林枫,刘子龙,李成成,等.节点域箱形加强式工字形柱弱轴连接钢框架的力学性能和经济性分析[J].建筑科学与工程学报,2015,32(03):52.
　LU Lin-feng,LIU Zi-long,LI Cheng-cheng,et al.Steel Frame Mechanical Properties and Economical Efficiency Analysis of Box Strengthenjoint Region Connection of I-section Column for Weak Axis[J].Journal of Architecture and Civil Engineering,2015,32(02):52.
[5]吴函恒,秦沛远,陈军武,等.水平荷载作用下钢框架预制混凝土抗侧力墙体装配式结构的简化计算方法[J].建筑科学与工程学报,2016,33(03):86.
　WU Han-heng,QIN Pei-yuan,CHEN Jun-wu,et al.Simplified Calculation Method of Steel Frame-prefabricated Concrete Lateral Force Resisting Wall Structures Under Lateral Load[J].Journal of Architecture and Civil Engineering,2016,33(02):86.
[6]陈以一,王拓.半组合结构压弯构件滞回试验的有限元模拟[J].建筑科学与工程学报,2010,27(01):84.
　CHEN Yi-yi,WANG Tuo.Finite Element Simulation on Hysteretic Experiment of Partially Encased Composite Structures Subjected to Combined Compression and Bending Members[J].Journal of Architecture and Civil Engineering,2010,27(02):84.
[7]贺拥军,周绪红,杨承超.隔层耗能桁架式抗侧力体系及其低周往复荷载作用性能研究[J].建筑科学与工程学报,2012,29(02):7.
　HE Yong-jun,ZHOU Xu-hong,YANG Cheng-chao.Research on Alternation Story-height Energy Dissipation Truss Lateral- load-resisting System and Its Behaviors Under Low Cyclic Loading[J].Journal of Architecture and Civil Engineering,2012,29(02):7.
[8]于长亮,郑宏,袁晓洒,等.带侧板钢节点力学性能研究[J].建筑科学与工程学报,2012,29(04):74.
　YU Chang-liang,ZHENG Hong,YUAN Xiao-sa,et al.Mechanical Behavior of Moment Resisting Connection with Side Plate Under Cyclic Loading[J].Journal of Architecture and Civil Engineering,2012,29(02):74.
[9]石启印,陆鸣,李爱群,等.钢-混凝土组合梁与钢管混凝土柱节点的非线性有限元分析[J].建筑科学与工程学报,2009,26(04):73.
　SHI Qi-yin,LU Ming,LI Ai-qun,et al.Nonlinear Finite Element Analysis of Steel-concrete Composite Beam to Concrete-filled Steel Tubular Column Joints[J].Journal of Architecture and Civil Engineering,2009,26(02):73.
[10]苟海刚,郑辉晓,卢林枫.箱形节点域工字形柱弱轴盖板加强连接的设计方法[J].建筑科学与工程学报,2018,35(01):77.
　GOU Hai-gang,ZHENG Hui-xiao,LU Lin-feng.Design Method of Cover-plate Reinforced Connection of I-section Column for Weak Axis with Box Joint Region[J].Journal of Architecture and Civil Engineering,2018,35(02):77.

备注/Memo

备注/Memo:
收稿日期:2020-07-12
基金项目:国家自然科学基金项目(51178381)
作者简介:郑 宏(1964-),男,黑龙江哈尔滨人,教授,博士研究生导师,工学博士,E-mail:cehzheng@chd.edu.cn。
更新日期/Last Update: 2021-03-20