«上一篇/Previous Article|本期目录/Table of Contents|下一篇/Next Article»

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:

41卷

期数:

2024年03期

页码:

98-107

栏目:

建筑结构

出版日期:

2024-05-20

文章信息/Info

Title:

Study of restoring force model on beam-to-column assembled joint connected with partially unbounded bar

文章编号:

1673-2049(2024)03-0098-10

作者:

程卫红^1,2,肖从真^1,2,田春雨¹,李建辉^1,2

(1. 中国建筑科学研究院有限公司,北京 100013; 2. 国家建筑工程技术研究中心,北京 100013)

Author(s):

CHENG Weihong^1,2, XIAO Congzhen^1,2, TIAN Chunyu¹, LI Jianhui^1,2

(1. China Academy of Building Research, Beijing 100013, China; 2. National Engineering Research Center of Building Technology, Beijing 100013, China)

关键词:

部分无黏结螺杆;  梁柱节点;  抗震性能;  滞回曲线;  骨架曲线;  恢复力模型

Keywords:

partially unbounded bar;  beam-to-column assembled joint;  seismic performance;  hysteresis curve;  skeleton curve;  restoring force model

分类号:

TU375.4

DOI:

10.19815/j.jace.2022.05071

文献标志码:

A

摘要:

为研究部分无黏结螺杆连接梁柱节点的抗震性能和恢复力特性,基于2榀高性能装配式框架结构的低周往复试验,分析典型边跨梁柱连接节点的破坏现象、滞回性能、骨架曲线、延性和变形能力等抗震性能指标; 根据试验结果和理论分析,提出了四折线的节点弯矩-转角骨架曲线模型,并给出各特征点的计算方法; 基于试验滞回曲线的特征分析,构建了节点的恢复力滞回规则,与骨架曲线构成节点的恢复力模型。结果表明:极限状态时,部分无黏结螺杆连接梁柱节点的节点区混凝土损伤程度较轻,节点的主要屈服机制为连接螺杆,节点整体工作状态良好; 节点弯矩-转角滞回曲线捏拢明显,呈现出明显的转动变形滑移,节点耗能能力较差; 节点转角位移延性系数介于3.94～6.21之间,2榀框架中节点的最大转角分别约为1/58和1/53,节点延性性能和变形能力良好; 所提出的节点弯矩-转角骨架曲线模型和恢复力滞回模型与试验结果吻合良好,该恢复力模型可用于应用该类型连接节点的整体装配式框架结构的弹塑性分析。

Abstract:

In order to study the seismic performance and restoring force character of beam-to-column assembled joint connected with partially unbounded bar, two high-performance precast frames were tested under low cyclic loading. The seismic performance indexes such as failure phenomenon, hysteresis performance, skeleton curve, ductility and deformation capacity of typical side-span beam-to-column assembled joints were studied and analyzed. According to the experimental results and theoretical analysis, the moment-rotation skeleton curve model of four-fold line joints was proposed, and the calculation method of each feature point was given. Based on the analysis of the characteristics of the test hysteresis curve, the restoring force hysteresis rule of the joint was constructed, and the restoring force model of the joint was formed with the skeleton curve. The results show that concrete damage in the joint area of the beam-to-column assembled joints is relatively light under limit state. The integral working state of the joints is good while the main yield concentrated on the connecting bar. A significant pinch phenomenon and obvious rotational deformation slip of moment-rotation hysteresis curves of the assembled joints indicates poor energy dissipation capacity. The ductility coefficients of the assembled joints are between 3.94 and 6.21, and the maximum rotation angles of the two frames are about 1/58 and 1/53. The ductility performance and deformation capacity of the assembled joints are good. The proposed joint moment-rotation skeleton curve model and restoring force hysteretic model are in good agreement with the test results. The established restoring force model can be used for the elastoplastic analysis of integral precast frame structure using this type of assembled joints.

参考文献/References:

[1] 周德恒,李爱群,贾 洪,等.预制钢筋混凝土框架结构抗震性能研究进展(Ⅰ):节点性能研究[J].工业建筑,2014,44(6):95-100,121.
ZHOU Deheng,LI Aiqun,JIA Hong,et al.Progress of investigation on seismic behavior of precast concrete frame structures(Ⅰ):study of joint property[J].Industrial Construction,2014,44(6):95-100,121.
[2]吴 刚,冯德成.装配式混凝土框架节点基本性能研究进展[J].建筑结构学报,2018,39(2):1-16.
WU Gang,FENG Decheng.Research progress on fundamental performance of precast concrete frame beam-to-column connections[J].Journal of Building Structures,2018,39(2):1-16.
[3]NAKAKI S D,STANTON J F,SRITHARAN S S.An overview of the PRESSS five-story precast test building[J].PCI Journal,1999,44(2):26-39.
[4]CHEOK G S,LEW H S.Performance of precast concrete beam-to-column connections subject to cyclic loading[J].PCI Journal,1991,36(3):56-67.
[5]ERSOY U,TANKUT T.Precast concrete members with welded plate connections under reversed cyclic loading[J].PCI Journal,1993,38(4):94-100.
[6]MORGEN B G,KURAMA Y C.A friction damper for post-tensioned precast concrete moment frames[J].PCI Journal,2004,49(4):112-133.
[7]ERTAS O,OZDEN S,OZTURAN T.Ductile connections in precast concrete moment resisting frames[J].PCI Journal,2006,51(3):66-76.
[8]PARASTESH H,HAJIRASOULIHA I,RAMEZANI R.A new ductile moment-resisting connection for precast concrete frames in seismic regions:an experimental investigation[J].Engineering Structures,2014,70:144-157.
[9]GUAN D Z,GUO Z X,XIAO Q D,et al.Experimental study of a new beam-to-column connection for precast concrete frames under reversal cyclic loading[J].Advances in Structural Engineering,2016,19(3):529-545.
[10]吴从晓,周 云,赖伟山,等.现浇与预制装配式混凝土框架节点抗震性能试验[J].建筑科学与工程学报,2015,32(3):60-66.
WU Congxiao,ZHOU Yun,LAI Weishan,et al.Experiment on seismic performance of cast-in-situ and prefabricated concrete frame structure joints[J].Journal of Architecture and Civil Engineering,2015,32(3):60-66.
[11]吴从晓,赖伟山,周 云,等.新型预制装配式消能减震混凝土框架节点抗震性能试验研究[J].土木工程学报,2015,48(9):23-30.
WU Congxiao,LAI Weishan,ZHOU Yun,et al.Experimental study on seismic behaviors of new energy-dissipative prefabricated concrete frame structure joints[J].China Civil Engineering Journal,2015,48(9):23-30.
[12]GUERRERO H,RODRIGUEZ V,ESCOBAR J A,et al.Experimental tests of precast reinforced concrete beam-column connections[J].Soil Dynamics and Earthquake Engineering,2019,125:105743.
[13]YE M,JIANG J,CHEN H M,et al.Seismic behavior of an innovative hybrid beam-column connection for precast concrete structures[J].Engineering Structures,2021,227:111436.
[14]CAI X N,PAN Z F,ZHU Y Z,et al.Experimental and numerical investigations of self-centering post-tensioned precast beam-to-column connections with steel top and seat angles[J].Engineering Structures,2021,226:111397.
[15]丁克伟,刘建华,马 巍,等.新型装配式半刚性节点抗震性能试验研究[J].土木工程学报,2021,54(4):1-7,56.
DING Kewei,LIU Jianhua,MA Wei,et al.Experimental study on seismic performances of a new type of fabricated semi-rigid beam-to-column connection[J].China Civil Engineering Journal,2021,54(4):1-7,56.
[16]谢鲁齐,吴 京,章锦洋,等.基于可更换耗能连接的装配式混凝土梁柱节点力学性能试验研究[J].东南大学学报(自然科学版),2021,51(1):1-8.
XIE Luqi,WU Jing,ZHANG Jinyang,et al.Experimental study on mechanical property of precast concrete frame with replaceable energy dissipation connectors[J].Journal of Southeast University(Natural Science Edition),2021,51(1):1-8.
[17]肖从真,李建辉,程卫红,等.高强混凝土装配式高层框架结构体系研究[J].建筑结构,2021,51(17):54-58.
XIAO Congzhen,LI Jianhui,CHENG Weihong,et al.Research on assembled high-rise frame structural system with high-strength concrete[J].Building Structure,2021,51(17):54-58.
[18]程卫红,肖从真,田春雨,等.梁柱部分无粘结螺杆连接装配式节点的受力机理分析研究[J].工程抗震与改造加固,2022,44(2):1-10.
CHENG Weihong,XIAO Congzhen,TIAN Chunyu,et al.Analysis and research on the performance mechanism of beam-to-column assembled joint connected with partially unbounded steel bar[J].Earthquake Resistant Engineering and Retrofitting,2022,44(2):1-10.
[19]建筑结构抗倒塌设计标准:T/CECS 392—2021[S].北京:中国计划出版社,2021.
Standard for anti-collapse design of building structures:T/CECS 392—2021[S].Beijing:China Planning Press,2021.

相似文献/References:

[1]郑 宏,方贤禄,苏耀烜,等.局部可更换钢框架梁-柱节点受力性能研究[J].建筑科学与工程学报,2021,38(02):47.[doi:10.19815/j.jace.2020.07030]
　ZHENG Hong,FANG Xian-lu,SU Yao-xuan,et al.Study on Mechanical Behavior of Partially Replaceable Steel Frame Beam-column Joints[J].Journal of Architecture and Civil Engineering,2021,38(03):47.[doi:10.19815/j.jace.2020.07030]
[2]张 敏,刘艳萍,邱秀丽,等.装配式混凝土U型钢筋环扣连接技术应用研究[J].建筑科学与工程学报,2022,39(01):14.[doi:10.19815/j.jace.2021.04020]
　ZHANG Min,LIU Yan-ping,QIU Xiu-li,et al.Application Research on Prefabricated Concrete U-shaped Reinforcement Buckle Connection Technology[J].Journal of Architecture and Civil Engineering,2022,39(03):14.[doi:10.19815/j.jace.2021.04020]
[3]易伟建,古 攀.混凝土梁柱节点带锚固板钢筋锚固性能试验研究[J].建筑科学与工程学报,2024,41(01):83.[doi:10.19815/j.jace.2022.03023]
　YI Weijian,GU Pan.Experimental research on anchorage performance of headed reinforcement in concrete beam-column joints[J].Journal of Architecture and Civil Engineering,2024,41(03):83.[doi:10.19815/j.jace.2022.03023]

备注/Memo

备注/Memo:

收稿日期:2023-05-18
基金项目:北京市自然科学基金项目(8212019)
作者简介:程卫红(1989-),男,工学博士,高级工程师,E-mail:chengweihong@cabrtech.com。
通信作者:肖从真(1967-),男,工学博士,研究员,博士生导师,E-mail:xiaocongzhen@cabrtech.com。

常用功能

更新日期/Last Update: 2024-05-20