«上一篇/Previous Article|本期目录/Table of Contents|下一篇/Next Article»

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:

22卷

期数:

2005年04期

页码:

45-49

栏目:

出版日期:

2006-12-20

文章信息/Info

Title:

Experimental research on limit value of axial compression ratio for concrete frame columns with central reinforcement

作者:

郭军庆;王雪韵;雷自学;周天华;

长安大学 建筑工程学院,陕西 西安 710061

Author(s):

GUO Jun-qing, WANG Xue-yun, LEI Zi-xue, ZHOU Tian-hua

School of Architectural Engineering, Chang'an University, Xi'an 710061, China

关键词:

加芯混凝土框架柱;  试验研究;  延性;  轴压比限值

Keywords:

concrete frame column with central reinforcement;  experimental research;  ductility;  limit value of axial compression ratio

分类号:

TU973.15

DOI:

-

文献标志码:

A

摘要:

为了解决高层结构设计中因轴压比限值影响使混凝土框架柱经常出现“胖柱少筋”等相关问题,通过6个加芯混凝土框架柱试件的低周反复伪静力试验,考察了试件的受力特性及破坏特征,分析了影响加芯混凝土框架柱延性的主要因素,并对各试件的V-Δ滞回曲线、位移延性比、极限位移转角等试验结果进行了研究。试验结果表明:轴压比、体积配箍率和芯柱纵筋配筋率对混凝土框架柱的延性及弹塑性变形性能均有较大的影响; 在高轴压比下,采用较大的体积配箍率和芯柱纵筋配筋率是保证加芯混凝土框架柱抗震延性的重要措施。最后提出了加芯混凝土框架柱轴压比限值的新建议值。

Abstract:

In order to solve the problems frequently that the concrete frame columns are too fat and too lightly reinforced in the design of high-rise structures because of the limit values of axial compression ratio, through the test of six specimens of concrete frame column with central reinforcement under cyclic lateral loading, authors investigated the properties and failure pattern of specimens, analyzed the major factors affecting the ductility of concrete frame columns with central reinforcement, and studied the test results of each specimen, including V and Δ hysteresis curve, displacement ductility ratio, ultimate displacement rotation, etc. The test results show that axial compression ratio, volumetric tie ratio and longitudinal reinforcement ratio of central reinforcement are among the major factors affecting both the ductility and elastic-plastic behavior of concrete frame columns and that at a high level of axial compression ratio, large volumetric tie ratio and longitudinal reinforcement ratio are important measures to ensure good seismic ductility of concrete frame columns with central reinforcement. Finally,new limit values of axial compression ratio were recommended for concrete frame columns with central reinforcement.

参考文献/References:

[1] 沈聚敏,周锡元,高小旺,等.抗震工程学[M].北京:中国建筑工业出版社,2000.
[2] GB 50011-2001,建筑抗震设计规范[S].
[3] 肖建庄,朱伯龙.钢筋混凝土框架柱轴压比限值试验研究[J].建筑结构学报,1998,18(5):2-7.
[4] 范 重,钱稼茹,吴学敏.核心配筋柱抗震性能试验研究[J].建筑结构学报,2001,21(1):14-19.
[5] 肖建庄,张建荣,秦灿灿.混凝土框架柱轴压比限值分析[J].建筑结构,2002,31(2):33-35.
[6] 郭军庆,许婷婷.芯柱对混凝土框架柱轴压比限值的影响分析[J].工业建筑,2005,42(增):175-178.

相似文献/References:

[1]屈文俊,邬生吉,秦宇航.活性粉末混凝土力学性能试验[J].建筑科学与工程学报,2008,25(04):13.
　QU Wen-jun,WU Sheng-ji,QIN Yu-hang.Mechanical Property Tests of Reactive Powder Concrete[J].Journal of Architecture and Civil Engineering,2008,25(04):13.
[2]黄文金,陈宝春.钢管混凝土桁梁受弯试验研究[J].建筑科学与工程学报,2006,23(01):29.
　HUANG Wen-jin,CHEN Bao-chun.Experimental Research on Concrete-Filled Steel Tube Truss Girder Under Bending[J].Journal of Architecture and Civil Engineering,2006,23(04):29.
[3]周天华,何保康,周绪红,等.高强冷弯薄壁型钢轴压短柱受力性能试验研究[J].建筑科学与工程学报,2005,22(03):36.
　ZHOU Tian-hua,HE Bao-kang,ZHOU Xu-hong,et al.Experimental research on bearing capacity of high-strength cold-formed steel stub columns[J].Journal of Architecture and Civil Engineering,2005,22(04):36.
[4]马玉平,马昕,崔建涛.高强度混凝土试验研究[J].建筑科学与工程学报,2005,22(03):67.
　Experimental research on high-strength concrete.Experimental research on high-strength concrete[J].Journal of Architecture and Civil Engineering,2005,22(04):67.
[5]周天华,何保康,周绪红,等.高强冷弯薄壁型钢轴压长柱受力性能试验研究[J].建筑科学与工程学报,2005,22(04):65.
　ZHOU Tian-hua,HE Bao-kang,ZHOU Xu-hong,et al.Experimental research on bearing capacity of high-strength cold-formed thin-walled steel long columns[J].Journal of Architecture and Civil Engineering,2005,22(04):65.
[6]任志刚,王丹丹.不同圆心角圆端形钢管混凝土短柱轴压性能[J].建筑科学与工程学报,2020,37(05):77.[doi:10.19815/j.jace.2019.05088]
　REN Zhi-gang,WANG Dan-dan.Behavior of Round-ended Concrete-filled Steel Tube Stub Column with Different Central Angles Under Axial Load[J].Journal of Architecture and Civil Engineering,2020,37(04):77.[doi:10.19815/j.jace.2019.05088]
[7]黄学伟,张潇舸,魏晨晨,等.Q690D钢材十字形焊接接头高温后的断裂破坏试验研究[J].建筑科学与工程学报,2021,38(05):56.[doi:10.19815/j.jace.2021.01051]
　HUANG Xue-wei,ZHANG Xiao-ge,WEI Chen-chen,et al.Experimental Research on Post-fire Fracture Failure of Q690D Steel Cross-shaped Welded Joints[J].Journal of Architecture and Civil Engineering,2021,38(04):56.[doi:10.19815/j.jace.2021.01051]
[8]钱凯,李易.混凝土结构抗连续倒塌研究综述[J].建筑科学与工程学报,2022,39(03):1.[doi:10.19815/j.jace.2021.12123]
　QIAN Kai,LI Yi.Review of Study on Progressive Collapse Resistance of RC Structures[J].Journal of Architecture and Civil Engineering,2022,39(04):1.[doi:10.19815/j.jace.2021.12123]
[9]宋满荣,胡忍强,黄慎江,等.预压装配式预应力混凝土框架边柱拆除时抗连续倒塌性能试验研究与理论分析[J].建筑科学与工程学报,2022,39(03):64.[doi:10.19815/j.jace.2021.12025]
　SONG Man-rong,HU Ren-qiang,HUANG Shen-jiang,et al.Experimental Research and Theoretical Analysis on Progressive Collapse Resistance of Prestressed Fabricated PC Frame with Removal of Side Columns[J].Journal of Architecture and Civil Engineering,2022,39(04):64.[doi:10.19815/j.jace.2021.12025]
[10]任鲁明,杨波,孔德阳.采用不同节点形式的三维钢框架-组合楼板子结构抗连续倒塌性能试验研究[J].建筑科学与工程学报,2022,39(03):75.[doi:10.19815/j.jace.2021.08083]
　REN Lu-ming,YANG Bo,KONG De-yang.Experimental Study on Progressive Collapse Resistance of 3D Steel Frame-composite Floor Substructures with Different Connection Types[J].Journal of Architecture and Civil Engineering,2022,39(04):75.[doi:10.19815/j.jace.2021.08083]

备注/Memo

备注/Memo:

收稿日期:2005-08-15
基金项目:教育部科学技术研究重点项目(03162); 陕西省自然科学研究项目(2002E₂01); 长安大学青年科技发展基金项目(Q0008009)
作者简介:郭军庆(1962-),男,山西闻喜人,长安大学副教授.E-mail:guojunq101@sohu.com

常用功能

更新日期/Last Update: 2006-12-20