|本期目录/Table of Contents|

[1]李秋胜,周亚萍,李建成,等.圆角化方形截面高层建筑风荷载特性试验[J].建筑科学与工程学报,2016,33(04):7-16.
 LI Qiu-sheng,ZHOU Ya-ping,LI Jian-cheng,et al.Experiment on Characteristics of Wind Loads of High-rise Building with Rounded Square Section[J].Journal of Architecture and Civil Engineering,2016,33(04):7-16.
点击复制

圆角化方形截面高层建筑风荷载特性试验(PDF)
分享到:

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:
33卷
期数:
2016年04期
页码:
7-16
栏目:
出版日期:
2016-07-22

文章信息/Info

Title:
Experiment on Characteristics of Wind Loads of High-rise Building with Rounded Square Section
作者:
李秋胜周亚萍李建成李 毅
湖南大学土木工程学院
Author(s):
LI Qiu-sheng ZHOU Ya-ping LI Jian-cheng LI Yi
College of Civil Engineering, Hunan University
关键词:
高层建筑方形截面风洞试验三分力系数风荷载功率谱体型系数
Keywords:
high-rise building square section wind tunnel test three-component coefficient wind load power spectrum shape coefficient
分类号:
-
DOI:
-
文献标志码:
A
摘要:
对圆角率为25%的正方形高层建筑刚性模型进行了测压试验,并对其风荷载特性进行了研究;分析了三分力系数和基底力矩系数随风向角的变化规律,给出了阻力系数平均值、根方差值和升力系数根方差值拟合结果;分析了最不利风向角下的风荷载功率谱,并采用经验公式进行拟合;分析了体型系数并与规范中正方形体型系数进行了对比。结果表明:对正方形建筑角部进行圆角化处理能明显降低建筑风荷载,且消除了功率谱曲线谱峰尖而窄的单峰现象,从本质上改变风荷载特性,有利于主体结构的抗风设计;角部区域负压较大,对幕墙抗风设计不利。
Abstract:
The pressure test was carried out on the rigid model of square section highrise building with round corner rate of 25%, and the characteristics of wind loads were studied. The change rules of threecomponent coefficient and base moment coefficient along with the wind angle were analyzed. The fitting results of mean value of drag coefficient, root square deviation of drag coefficient and lift coefficient were given. The wind load power spectrum under the most unfavorable wind angle was analyzed, and fitted by empirical formula. The shape coefficient was analyzed and compared with the square shape coefficient of code. The results show that the wind load can be significantly reduced when the corners of square building are rounded, and the sharp and narrow single peak phenomenon of the power spectrum curve can be eliminated. The wind load characteristic is changed in essence, and is beneficial for the wind resistant design of the main structure. The negative pressure in the corner area is larger, which is disadvantageous to the wind resistance design of curtain wall.

参考文献/References:

-

相似文献/References:

[1]鞠开林,李秋胜.复杂周边高层建筑风压分布特性试验[J].建筑科学与工程学报,2013,30(02):82.
 JU Kai-lin,LI Qiu-sheng.[J].Journal of Architecture and Civil Engineering,2013,30(04):82.
[2]周天华,吴函恒,白亮,等.钢框架-预制混凝土抗侧力墙装配式结构体系[J].建筑科学与工程学报,2013,30(03):1.
 ZHOU Tian-hua,WU Han-heng,BAI Liang,et al.Fabricated Structural System of Steel Frame-prefabricated Concrete Lateral Resistance Wall[J].Journal of Architecture and Civil Engineering,2013,30(04):1.
[3]雷 拓,刘伯权,钱 江,等.配置斜向钢筋的高强混凝土扁柱抗震性能研究[J].建筑科学与工程学报,2013,30(03):50.
 LEI Tuo,LIU Bo-quan,QIAN Jiang,et al.Research on Seismic Performance of High-strength Concrete Flat Columns with Diagonal Reinforcements[J].Journal of Architecture and Civil Engineering,2013,30(04):50.
[4]汤华,王松帆.基于风洞试验的高层建筑风荷载研究及抗风设计[J].建筑科学与工程学报,2012,29(02):96.
 TANG Hua,WANG Song-fan.Wind Load Research and Wind-resistant Design of High-rise Buildings Based on Wind Tunnel Test[J].Journal of Architecture and Civil Engineering,2012,29(04):96.

备注/Memo

备注/Memo:
-
更新日期/Last Update: 2016-07-22