|本期目录/Table of Contents|

[1]王志宇,张 涛,姜瑞娟,等.波形钢腹板-钢管混凝土翼缘组合梁桥疲劳性能的多尺度有限元分析[J].建筑科学与工程学报,2018,35(05):78-85.
　WANG Zhi-yu,ZHANG Tao,JIANG Rui-juan,et al.Multi-scale Finite Element Analysis of Fatigue Property Composite Girder Bridges with Corrugated Steel Webs and Concrete Filled Steel Tubes[J].Journal of Architecture and Civil Engineering,2018,35(05):78-85.
点击复制

波形钢腹板-钢管混凝土翼缘组合梁桥疲劳性能的多尺度有限元分析(PDF)
分享到：

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:
35卷
期数:
2018年05期
页码:
78-85
栏目:
出版日期:
2018-09-03

文章信息/Info

Title:
Multi-scale Finite Element Analysis of Fatigue Property Composite Girder Bridges with Corrugated Steel Webs and Concrete Filled Steel Tubes
作者:
王志宇，张 涛，姜瑞娟，董桔灿，李晓磊，盖卫明
四川大学建筑与环境学院
Author(s):
WANG Zhi-yu, ZHANG Tao, JIANG Rui-juan, DONG Ju-can, LI Xiao-lei, GAI Wei-ming
College of Architecture & Environment, Sichuan University
关键词:
多尺度模型; 波形钢腹板; 钢管混凝土; 组合梁桥; 疲劳性能
Keywords:
multi-scale model;  corrugated web;  concrete filled steel tube;  composite girder fatigue property
分类号:
-
DOI:
-
文献标志码:
A
摘要:
对波形钢腹板-钢管混凝土翼缘组合梁进行了多点约束界面连接及多尺度有限元建模，通过计算分析和理论公式对比，验证了疲劳寿命预测精度和计算分析效率。采用多尺度模型对波形钢腹板钢管翼缘连接部位应力特性进行了分析，比较了波形角以及波形转角曲率半径与波形高度比值对连接部位应力特性的影响。结果表明：采用多尺度模型可在不影响疲劳寿命预测精度的前提下，较为有效地提高波形钢腹板钢管组合梁疲劳分析的计算效率，其计算分析时间比精细化模型可节约28.9%，而寿命预测相对误差可控制在2%以内；对于梁结构建模，采用多尺度模型计算分析时间比精细化模型可节约40.7%，而寿命预测相对误差可控制在5%以内；多尺度模型模拟连接部位主应力分布规律与精细化模型一致，最大主应力值相对误差在5%以内；该方法可较好地实现对波形钢腹板与钢管混凝土翼缘连接部位不利应力状态的模拟，可为波形钢腹板钢管混凝土翼缘组合梁的相关疲劳损伤分析提供参考。
Abstract:
The finite element models were developed for composite girders with corrugated steel webs and concrete filled steel tubes using multipoint constraint and multi-scale modeling. The prediction accuracy and calculation efficiency of adopted finite element models were verified through a comparison with theoretical formulas. Based on the multi-scale model, the stress characteristics of connecting parts joining the corrugated steel webs and the concrete filled steel tubes were analyzed. A comparison was made for the prediction results influenced by the corrugation angle and the ratio of corrugation bending radius to corrugation height. The results show that the use of multiscale model can effectively promote the calculation efficiency without affecting precision of fatigue life prediction as a precondition. 28.9% less calculation time and 2% prediction relative error can be achieved in multi-scale model with respect to refined model. For macro girder model, 40.7% less calculation time and 5% prediction relative error can be attained in multi-scale model. The adverse stress condition of connecting parts between the corrugated steel webs and the concrete filled steel tubes can be simulated accordingly. The resultant maximum principal stress relative error is within 5%, and the method can simulate adverse stress behavior of connecting part between corrugated webs and concrete filled steel tubes. Thus, the analytical results can be taken as a reference for damages of composite girder bridges with corrugated steel webs and concrete filled steel tubes.

参考文献/References:

相似文献/References:

[1]许 斌,王治原,陈洪兵.钢筋混凝土柱动力滞回性能两尺度数值模拟[J].建筑科学与工程学报,2017,34(03):16.
　XU Bin,WANG Zhi-yuan,CHEN Hong-bing.Numerical Simulation on Dynamic Hysteretic Behavior of Reinforced Concrete Columns with Two-scale Model[J].Journal of Architecture and Civil Engineering,2017,34(05):16.
[2]陈宜言,陈宝春,林松.波形钢腹板PC组合箱梁抗扭性能试验与有限元分析[J].建筑科学与工程学报,2011,28(04):106.
　CHEN Yi-yan,CHEN Bao-chun,LIN Song.Experiment of Torsional Performance and Finite Element Analysis of PC Composite Box Girder with Corrugated Steel Webs[J].Journal of Architecture and Civil Engineering,2011,28(05):106.
[3]万水,李淑琴,马磊.波形钢腹板预应力混凝土组合箱梁结构在中国桥梁工程中的应用[J].建筑科学与工程学报,2009,26(02):15.
　WAN Shui,LI Shu-qin,MA Lei.Application of Prestressed Concrete Composite Box-girder Structure with Corrugated Steel Webs in Bridge Engineering in China[J].Journal of Architecture and Civil Engineering,2009,26(05):15.

备注/Memo

备注/Memo:
更新日期/Last Update: 2018-09-03